EN 13043:2002/AC:2004
Current
Current
The latest, up-to-date edition.
AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
Amendment of
Published date
26-05-2004
Publisher
Foreword
1 Scope
2 Normative references
3 Normative references
4 Requirements for coarse and fine aggregate
5 Requirements for filler aggregate
6 Evaluation of conformity
7 Designation
8 Marking and labelling
Annex A (informative) - Notes for guidance on the
freezing and thawing resistance of aggregates
Annex B (normative) - Factory production control
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements
or other provisions of EU Directives
Bibliography
Defines the properties of aggregates and filler aggregates obtained by processing natural or manufactured or recycled materials for use in bituminous mixtures and surface treatments for roads, airfields and other trafficked areas.
| Committee |
TC 154
|
| DevelopmentNote |
2013 Edition issued on 01/05/2013 is withdrawn by the Publisher. (01/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 13043 : 2002 + NA 2008 | Identical |
| DIN EN 13043:2015-07 (Draft) | Identical |
| UNI EN 13043 : 2013 | Identical |
| I.S. EN 13043:2002 | Identical |
| NEN EN 13043 : 2003 C1 2006 | Identical |
| SN EN 13043 : 2006 | Identical |
| SN 670103B : 2006 | Identical |
| NF EN 13043 : 2003 | Identical |
| NBN EN 13043 : 2002 COR 2003 | Identical |
| UNE-EN 13043:2003 | Identical |
| I.S. EN 13043:2013 | Identical |
| PN EN 13043 : 2004 AC 2004 | Identical |
| BS EN 13043:2013 | Identical |
| DIN EN 13043:2002-12 | Identical |
| UNE-EN 13043/AC:2004 | Identical |
| 13/30278708 DC : 0 | BS EN 13108-1 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 12271:2006 | SURFACE DRESSING - REQUIREMENTS |
| PREN 13108-5 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| 13/30278717 DC : 0 | BS EN 13108-5 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| 13/30278729 DC : 0 | BS EN 13108-3 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| 10/30086524 DC : 0 | BS ISO 10844 - ACOUSTICS - SPECIFICATION OF TEST TRACKS FOR THE PURPOSE OF MEASURING NOISE EMITTED BY ROAD VEHICLES |
| PD CEN/TS 16346:2012 | Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate |
| DIN EN 15626:2016-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| 13/30278711 DC : 0 | BS EN 13108-4 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| 13/30278723 DC : 0 | BS EN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| S.R. CEN/TS 16346:2012 | BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR AND IMMEDIATE ADHESIVITY OF CATIONIC BITUMINOUS EMULSIONS WITH 2/4 MM AGGREGATE |
| BS 2000-575(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| BS EN 13108-3:2016 | Bituminous mixtures. Material specifications Soft Asphalt |
| BS EN 13242:2013 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 12274-8:2005 | Slurry surfacing - Test methods - Part 8: Visual assessment of defects |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 12697-37:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA |
| EN 12271:2006 | Surface dressing - Requirements |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| UNE-EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
| PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| PREN 13108-3 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| IP 575 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| 13/30278705 DC : 0 | BS EN 13108-9 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN-LAYERS (AUTL) |
| PREN 13108-7 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| 09/30210257 DC : 0 | BS EN 13614 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| 13/30278726 DC : 0 | BS EN 13108-7 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| PREN 13108-2 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
| PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| PREN 13108-8 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| PREN 13108-1 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| PREN 12697-10 : DRAFT 2016 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 10: COMPACTABILITY |
| I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| 18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| BS EN 12697-21:2012 | Bituminous mixtures. Test methods for hot mix asphalt Indentation using plate specimens |
| BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
| I.S. EN 13108-7:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| DIN EN 12697-21:2012-06 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 21: INDENTATION USING PLATE SPECIMENS |
| I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
| I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| I.S. EN 13108-21:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| I.S. EN 13614:2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 13108-3:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| 16/30336868 DC : 0 | BS EN 12697-10 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 10: COMPACTABILITY |
| 06/30149762 DC : 0 | EN 12273 - SLURRY SURFACING - SPECIFICATIONS |
| PREN 13108-4 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| 13/30278714 DC : 0 | BS EN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| BS 2000-521(2011) : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| UNI EN 13614 : 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| I.S. EN 13108-9:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN LAYER (AUTL) |
| ISO 10844:2014 | Acoustics Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| UNI CEN/TS 16346 : 2013 | BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR AND IMMEDIATE ADHESIVITY OF CATIONIC BITUMINOUS EMULSIONS WITH 2/4 MM AGGREGATE |
| UNI EN 12697-21 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 21: INDENTATION USING PLATE SPECIMENS |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| DIN EN 12271:2007-03 | Surface dressing - Requirements |
| DIN EN 12274-8:2005-12 | Slurry surfacing - Test methods - Part 8: Visual assessment of defects |
| BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
| BS EN 12271:2006 | Surface dressing. Requirements |
| UNE-EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| EN 12697-21:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 21: INDENTATION USING PLATE SPECIMENS |
| EN 13108-4:2016/AC:2017 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| UNI EN 13242 : 2013 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| I.S. EN 12697-37:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 37: HOT SAND TEST FOR THE ADHESIVITY OF BINDER ON PRECOATED CHIPPINGS FOR HRA |
| DIN EN 15626 E : 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| I.S. EN 15626:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| PREN 13108-6 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| PREN 13108-21 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| 13/30278732 DC : 0 | BS EN 13108-21 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| BS EN 13108-9:2016 | Bituminous mixtures. Material specifications Asphalt for Ultra-Thin Layer (AUTL) |
| 13/30278720 DC : 0 | BS EN 13108-6 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| BS ISO 10844:2014 | Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| 15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 13108-7:2016 | Bituminous mixtures. Material specifications Porous Asphalt |
| BS EN 12697-37:2003 | Bituminous mixtures. Test methods for hot mix asphalt Hot sand test for the adhesivity of binder on precoated chippings for HRA |
| BS EN 12274-8:2005 | Slurry surfacing. Test methods Visual assessment of defects |
| UNE-EN 12697-21:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens |
| BS EN 13880-11:2003 | Hot applied joint sealants Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
| BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
| I.S. EN 12697-21:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 21: INDENTATION USING PLATE SPECIMENS |
| BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
| BS EN 13108-8:2016 | Bituminous mixtures. Material specifications Reclaimed asphalt |
| BS EN 13614:2004 | Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitumen emulsions by water immersion test. Aggregate method |
| EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
| EN 13880-11:2003 | Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
| 13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 13108-8:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| 04/30123462 DC : DRAFT OCT 2004 | EN 12271 - SURFACE DRESSING |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| DIN ISO 10844:2016-09 | ACOUSTICS - SPECIFICATION OF TEST TRACKS FOR MEASURING NOISE EMITTED BY ROAD VEHICLES AND THEIR TYRES (ISO 10844:2014) |
| 07/30160848 DC : 0 | BS EN 15626 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF CUT-BACK AND FLUXED BITUMINOUS BINDERS BY WATER IMMERSION TEST - AGGREGATE METHOD |
| DIN ISO 10844 E : 2016 | ACOUSTICS - SPECIFICATION OF TEST TRACKS FOR MEASURING NOISE EMITTED BY ROAD VEHICLES AND THEIR TYRES (ISO 10844:2014) |
| BS EN 15626:2009 | Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method |
| PREN 13614 : DRAFT 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
| PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| DIN EN 13614:2011-06 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
| BS EN 13108-21:2016 | Bituminous mixtures. Material specifications Factory Production Control |
| BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
| CEN/TS 16346:2012 | Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
| EN 196-21 : 1989 | METHODS OF TESTING CEMENT - DETERMINATION OF THE CHLORIDE, CARBON DIOXIDE AND ALKALI CONTENT OF CEMENT |
| EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
| EN 13179-2:2000 | Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 459-2:2010 | Building lime - Part 2: Test methods |
| EN 932-3:1996/A1:2003 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 3: PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION |
| EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
| EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
| EN 933-6:2014 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
| EN 933-10:2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
| EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
| EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| EN 932-5:2012/AC:2014 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| EN 933-4:2008 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 1367-3:2001/AC:2004 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT" |
| EN 933-5:1998/A1:2004 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.