• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 13108-5:2016

Current
Current

The latest, up-to-date edition.

Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
Published date

15-06-2016

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Requirements for constituent materials
5 Requirements for the mixture
6 Assessment and verification of constancy of
  performance - AVCP
7 Identification
Annex A (normative) - Calculations of the penetration or
        the softening point of the binder of a mixture when
        reclaimed asphalt is used
Annex ZA (informative) - Relationship of this European
         Standard with Regulation (EU) No. 305/2011
Bibliography

This European Standard specifies requirements for mixtures of the mix group Stone Mastic Asphalt for use on roads, airfields and other trafficked areas. Stone Mastic Asphalt is mainly to be used for surface courses. Stone Mastic Asphalt can also be used for regulating and binder courses.The mixtures of the mix group Stone Mastic Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.

DevelopmentNote
To be read in conjunction with EN 13108-20 and EN 13108-21. (06/2006) Supersedes PREN 13108-5. (06/2016)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DIN EN 16432-2:2015-04 (Draft) RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS
I.S. EN 16432-2:2017 RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS
ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
BS EN 12591:2009 Bitumen and bituminous binders. Specifications for paving grade bitumens
EN 12697-35:2016 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
EN 13108-8:2016 Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
CEN/TS 15518-4:2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment
EN 13108-20:2016 Bituminous mixtures - Material specifications - Part 20: Type Testing
PREN 12697-35 : DRAFT 2014 BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING
PREN 13108-20 : DRAFT 2013 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING
DIN EN 12697-20:2012-06 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
I.S. EN 13108-20:2016 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING
I.S. EN 12591:2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
I.S. EN 12697-35:2016 BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING
DIN EN 12591:2009-08 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
PD CEN/TS 15518-4:2013 Winter maintenance equipment. Road weather information systems Test methods for stationary equipment
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement Correction for temperature when testing with the CPX method
BS EN 16432-2:2017 Railway applications. Ballastless track systems System design, subsystems and components
UNE-EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
UNI EN 12591 : 2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
14/30310361 DC : 0 BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING
PREN 13108-21 : DRAFT 2013 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL
DIN EN 16432-2 E : 2017 RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS
13/30278732 DC : 0 BS EN 13108-21 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL
S.R. CEN/TS 15518-4:2013 WINTER MAINTENANCE EQUIPMENT - ROAD WEATHER INFORMATION SYSTEMS - PART 4: TEST METHODS FOR STATIONARY EQUIPMENT
UNI EN 12697-20 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
BS EN 12697-20:2012 Bituminous mixtures. Test methods for hot mix asphalt Indentation using cube or cylindrical specimens (CY)
UNE-EN 12697-20:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or cylindrical specimens (CY)
BS EN 12697-35:2004 Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing
BS EN 13108-20:2016 Bituminous mixtures. Material specifications Type Testing
I.S. EN 12697-20:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
BS EN 13108-8:2016 Bituminous mixtures. Material specifications Reclaimed asphalt
EN 12697-20:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY)
EN 16432-2:2017 Railway applications - Ballastless track systems - Part 2: System design, subsystems and components
13/30278735 DC : 0 BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING
I.S. EN 13108-8:2016 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT
UNI CEN/TS 15518-4 : 2013 WINTER MAINTENANCE EQUIPMENT - ROAD WEATHER INFORMATION SYSTEMS - PART 4: TEST METHODS FOR STATIONARY EQUIPMENT
PREN 12591 : DRAFT 2016 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens

EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
EN 12697-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
EN 13108-4:2016/AC:2017 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT
EN 12697-43:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
EN 12697-46 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 46: LOW TEMPERATURE CRACKING AND PROPERTIES BY UNIAXIAL TENSION TESTS
EN 12697-8:2003 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS
EN 12697-22:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking
EN 1427:2015 Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method
EN 12697-25:2016 Bituminous mixtures - Test methods - Part 25: Cyclic compression test
EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN 12697-41:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
EN 13108-20:2016 Bituminous mixtures - Material specifications - Part 20: Type Testing
EN 13108-8:2016 Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
EN 12697-45 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 45: SATURATION AGEING TENSILE STIFFNESS (SATS) CONDITIONING TEST
EN 12697-26:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
EN 12697-18:2017 Bituminous mixtures - Test methods - Part 18: Binder drainage
EN 12697-24:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 24: RESISTANCE TO FATIGUE
EN 12697-31:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor
EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
EN 12697-49:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing
EN 13108-21:2016 Bituminous mixtures - Material specifications - Part 21: Factory Production Control
EN 12697-16:2016 Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres
EN 14023:2010 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens
EN 12697-44:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test
EN 12697-4:2015 Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.