EN 13141-6:2014
Current
Current
The latest, up-to-date edition.
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
Published date
10-12-2014
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Performance testing of aerodynamic characteristics
6 Performance testing of external leakages
7 Performance testing of electrical power
8 Performance testing of energy efficiency
9 Performance testing of acoustic characteristic
Annex A (informative) - Example of compensating mounting
for air flow measurement device
Bibliography
This European Standard specifies laboratory methods for measuring the aerodynamic and acoustic performance characteristics and energy consumption of assembled exhaust ventilation system packages for a single dwelling. If a component of the package is not physically linked to the others (e.g. air inlets), then it is assumed to have been tested according to the test method related to this component. An example of a typical exhaust package is given in Figure 2.The object of this European Standard is to provide tested characteristics for a ventilation system package in worst case conditions. It is assumed that better values are achieved on site when the ventilation system package is installed in accordance with the manufacturer's instruction and within the limits of the test conditions given in this standard.Safety requirements are given in EN 60335-2-80.
| Committee |
CEN/TC 156
|
| DevelopmentNote |
Supersedes PREN 13141-6. (01/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 13141-6:2015 | Identical |
| SN EN 13141-6 : 2014 | Identical |
| UNI EN 13141-6 : 2004 | Identical |
| PN EN 13141-6 : 2015 | Identical |
| NEN EN 13141-6 : 2014 | Identical |
| NBN EN 13141-6 : 2015 | Identical |
| NF EN 13141-6 : 2015 | Identical |
| BS EN 13141-6:2014 | Identical |
| UNE-EN 13141-6:2015 | Identical |
| NS EN 13141-6 : 2014 | Identical |
| DIN EN 13141-6:2015-02 | Identical |
| I.S. EN 13141-6:2014 | Identical |
| EN 13142:2013 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| 12/30259182 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| I.S. EN 14134:2004 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| UNI EN 13142 : 2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| EN 12354-5:2009/AC:2010 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| PREN 13142 : DRAFT 2012 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| I.S. EN 13142:2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| BS EN 14134:2004 | Ventilation for buildings. Performance testing and installation checks of residential ventilation systems |
| EN 14134:2004 | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
| DIN EN 13142:2013-06 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| DIN EN 14134:2004-04 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING AND INSTALLATION CHECKS OF RESIDENTIAL VENTILATION SYSTEMS |
| 11/30234297 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
| ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 3: Nozzles and Venturi nozzles |
| EN 60704-2-13:2017 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other cooking fume extractors |
| EN ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN ISO 3743-2:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| EN ISO 3741:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 4: Venturi tubes |
| EN ISO 3745:2012/A1:2017 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017) |
| EN 13142:2013 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
| EN 13141-4:2011 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential ventilation systems |
| EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| EN ISO 5167-4:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) |
| ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN ISO 5167-3:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| EN ISO 9614-2 : 1996 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING |
| EN 13141-7:2010 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| EN ISO 9614-1:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.