EN 132:1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Respiratory protective devices - Definitions of terms and pictograms
Superseded date
16-02-2022
Published date
16-12-1998
Publisher
Foreword
1. Scope
2. Normative references
3. Terms and definitions
4. Pictograms
4.1 See information supplied by manufacturer
4.2 End of shelf life
4.3 Temperature range of storage conditions
4.4 Maximum humidity of storage conditions
Alphabetical index
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other provisions of EU
Directives
This European Standard is applicable to respiratory protective devices except diving apparatus for which the definitions are given in EN 250. This European Standard defines commonly used terms and pictograms of this area. The object of this European Standard is to achieve a uniform interpretation of these terms and pictograms in order to prevent ambiguous use of them. EN 135 contains a survey of these terms in the three official languages English, French and German.
| Committee |
CEN/TC 79
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 132:1999-02 | Identical |
| BS EN 132:1999 | Identical |
| NS EN 132 : 3ED 1999 | Identical |
| NF EN 132 : 1999 | Identical |
| I.S. EN 132:1999 | Identical |
| PN EN 132 : 2003 | Identical |
| NBN EN 269 : 1994 | Identical |
| NBN EN 137 : 2007 | Identical |
| NBN EN 138 : 1994 | Identical |
| UNE-EN 132:1999 | Identical |
| NBN EN 132 : 1999 | Identical |
| NFS 76 001 : 1986 | Identical |
| SANS 50132 : 1ED 1998(R2014) | Identical |
| SN EN 132 : 1999 | Identical |
| NEN EN 132 : 1999 | Identical |
| UNI EN 132 : 2000 | Identical |
| BS 6927:1988 | Identical |
| I.S. EN 1073-1:2016 | PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT |
| I.S. EN 141:2000 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
| BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
| I.S. EN 145:1998 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 1835:2000 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNI EN 13274-7 : 2008 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 7: DETERMINATION OF PARTICLE FILTER PENETRATION |
| BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
| 12/30262167 DC : 0 | BS EN 12021 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED GASES FOR BREATHING APPARATUS |
| 07/30163579 DC : 0 | BS EN 13274-7 - RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 7: DETERMINATION OF PARTICLE FILTER PENETRATION |
| 03/314352 DC : 0 | EN 378-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| ONORM EN 14594 : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 943-1:2015+A1:2019 | PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 1: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS |
| PREN 15695-1 : DRAFT 2015 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
| 17/30360256 DC : 0 | BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| UNE-EN 15695-1:2018 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
| UNI EN 14683 : 2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13274-2:2001 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 2: PRACTICAL PERFORMANCE TESTS |
| EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
| UNE-EN 1827:1999 | RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING |
| I.S. EN 143:2000 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
| BS EN ISO 10882-1:2011 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of airborne particles |
| BS EN 142:2002 | Respiratory protective devices. Mouthpiece assemblies. Requirements, testing, marking |
| BS EN 401:1993 | Respiratory protective devices for self-rescue. Self-contained closed-circuit breathing apparatus. Chemical oxygen (KO<sub>2</sub>) escape apparatus. Requirements, testing, marking |
| BS EN 13949:2003 | Respiratory equipment. Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen. Requirements, testing, marking |
| BS EN 138:1994 | Respiratory protective devices. Specification for fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly |
| DIN EN 142:2002-08 | RESPIRATORY PROTECTIVE DEVICES - MOUTHPIECE ASSEMBLIES - REQUIREMENTS, TESTING, MARKING |
| DIN EN 137:2007-01 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| EN 12419 : 1999 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING, MARKING |
| EN 13274-7:2008 | Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
| EN 1061 : 1996 | RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS - CHEMICAL OXYGEN (NAC103) ESCAPE APPARATUS - REQUIREMENTS, TESTING, MARKING |
| EN 13274-3:2001 | Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance |
| EN 12941:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN 13274-1:2001 | Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage |
| DIN EN 14529:2006-01 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| EN 133:2001 | Respiratory protective devices - Classification |
| EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| EN 13794:2002 | Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking |
| DIN EN 13949:2003-06 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT SELF-CONTAINED DIVING APPARATUS FOR USE WITH COMPRESSED NITROX AND OXYGEN - REQUIREMENTS, TESTING, MARKING |
| PREN 943-1 : DRAFT 2011 | PROTECTIVE CLOTHING AGAINST SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 1: PERFORMANCE REQUIREMENTS FOR VENTILATED AND NON-VENTILATED 'GAS-TIGHT' (TYPE 1) SUITS |
| NF EN 15333-2 : 2011 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| I.S. EN 270:1995 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING |
| 13/30291777 DC : 0 | BS EN 378-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| PREN 14683 : DRAFT 2017 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| 17/30359208 DC : 0 | BS EN 14387 - RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| PREN 378-3 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| 16/30341711 DC : 0 | BS EN 943-2 - PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET) |
| PREN 14387 : DRAFT 2017 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| PREN 14593-1 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK- REQUIREMENTS, TESTING AND MARKING |
| 17/30348247 DC : 0 | BS EN 14593-1 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING |
| 02/563850 DC : DRAFT SEP 2002 | BS EN 14529 - RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH HALF MASK DESIGNED TO INCLUDE A POSITIVE PRESSURE LUNG GOVERNED DEMAND VALVE FOR ESCAPE PURPOSES ONLY - REQUIREMENTS, TESTING, MARKING |
| PREN 943-2 : DRAFT 2016 | PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET) |
| 07/30164820 DC : 0 | BS EN 15695-1 - AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY - PROTECTION AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
| BS EN 15333-1:2008 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Demand apparatus |
| 15/30329410 DC : 0 | BS EN 15695-1 - AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
| 03/112290 DC : DRAFT AUG 2003 | BS EN 529 - RESPIRATORY PROTECTIVE DEVICES - RECOMMENDATIONS FOR SELECTION, USE, CARE AND MAINTENANCE - GUIDANCE DOCUMENT |
| 02/565105 DC : DRAFT DEC 2002 | BS EN 14593-1 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| BS EN 13274-7:2008 | Respiratory protective devices. Methods of test Determination of particle filter penetration |
| BS EN 1073-1 : 2016 | PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT |
| DIN EN 1073-1:2016-09 | PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT |
| BS EN 15695-1:2017 | Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances Cab classification, requirements and test procedures |
| PREN 14594 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 14683 E : 2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 13274-7:2008-04 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 7: DETERMINATION OF PARTICLE FILTER PENETRATION |
| DIN EN 12941:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 12942:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| DIN EN 1146:2005-12 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 14387 E : 2008 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14387:2008-05 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (includes Amendment A1:2008) |
| BS EN 143:2000 | Respiratory protective devices. Particle filters. Requirements, testing, marking |
| BS EN 13274-5:2001 | Respiratory protective devices. Methods of test Climatic conditions |
| BS EN 133:2001 | Respiratory protective devices. Classification |
| BS EN 12083:1998 | Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking |
| BS EN 134:1998 | Respiratory protective devices. Nomenclature of components |
| I.S. EN 12021:2014 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| I.S. EN 1827:1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| I.S. EN 137:2006 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| EN 143:2000/A1:2006 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 405:2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14593-2:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 403:2004 | RESPIRATORY PROTECTIVE FOR SELF-RESCUE FILTERING DEVICES WITH HOOD FOR SELF-RESCUE FROM FIRE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 404:2005 | RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE - FILTER SELF-RESCUER FROM CARBON MONOXIDE WITH MOUTHPIECE ASSEMBLY |
| I.S. EN 378-3:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
| I.S. EN 133:2002 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| I.S. EN 402:2003 | RESPIRATORY PROTECTIVE DEVICES - LUNG GOVERNED DEMAND SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK OR MOUTHPIECE ASSEMBLY FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14387:2004 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14593-2:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN ISO 10882-1:2011 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES (ISO 10882-1:2011) |
| DIN EN 1827:2009-11 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking (includes Amendment A1:2009) |
| I.S. EN 1146:2005 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 271:1995 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE OR POWERED FRESH AIR HOSE BREATHING APPARATUS INCORPORATING A HOOD FOR USE IN ABRASIVE BLASTING OPERATIONS - REQUIREMENTS, TESTING, MARKING |
| 12/30262164 DC : 0 | BS EN 250 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT SELF-CONTAINED COMPRESSED AIR DIVING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| PREN 12941 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 12942:1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| NF EN 15333-1 : 2011 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| DIN EN 14594:2005-07 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS ISO 23269-2:2011 | Ships and marine technology. Breathing apparatus for ships Self-contained breathing apparatus for shipboard firefighters |
| 07/30169528 DC : 0 | BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| DIN EN 15333-2:2009-07 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| 13/30282508 DC : 0 | BS EN 1073-1 - PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
| UNI EN 15333-2 : 2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| UNI EN 15333-1 : 2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| DIN EN 14683:2014-07 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| PREN 12942 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| I.S. EN 15333-1:2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| PREN 250 : DRAFT 2012 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT SELF-CONTAINED COMPRESSED AIR DIVING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN ISO 10882-1:2012-01 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| DIN EN 143:2007-02 | Respiratory protective devices - Particle filters - Requirements, testing, marking (includes Corrigendum AC:2005 + Amendment A1:2006) |
| DIN EN 149:2009-08 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 405 : 2009-08 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| DIN EN 12021:2014-07 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| BS EN 400:1993 | Respiratory protective devices for self-rescue. Self-contained closed-circuit breathing apparatus. Compressed oxygen escape apparatus. Requirements, testing, marking |
| BS EN 1835:2000 | Respiratory protective devices. Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood. Requirements, testing, marking |
| UNE-EN ISO 10882-1:2012 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| BS EN 13274-4:2001 | Respiratory protective devices. Methods of test Flame tests |
| UNE-EN 378-3:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
| I.S. EN 13274-4:2001 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 4: FLAME TESTS |
| EN 13274-4:2001 | Respiratory protective devices - Methods of test - Part 4: Flame tests |
| EN 135:1998 | Respiratory protective devices - List of equivalent terms |
| EN 269:1994 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
| EN 142:2002 | Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| UNI EN 1827 : 2009 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12942 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| UNI EN 405 : 2009 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12941 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNI EN ISO 10882-1 : 2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES |
| UNI EN 149 : 2009 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| UNI EN 12021 : 2014 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| 11/30253429 DC : 0 | BS EN 943-1 - PROTECTIVE CLOTHING AGAINST SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 1: PERFORMANCE REQUIREMENTS FOR VENTILATED AND NON-VENTILATED 'GAS-TIGHT' (TYPE 1) SUITS |
| 12/30268236 DC | BS EN 943-2. Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET) |
| BS EN 15333-2:2009 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Free flow apparatus |
| 17/30348244 DC : 0 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 13794:2002 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 12941:1998 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 136:1998 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
| 07/30164823 DC : 0 | BS EN 15695-2 - AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY - PROTECTION AGAINST HAZARDOUS SUBSTANCES - PART 2: AIR PURIFYING DEVICES |
| I.S. EN 139:1995 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS FOR USE WITH A FULL FACE MASK, HALF MASK OR A MOUTHPIECE ASSEMBLY - REQUIREMENTS, TESTING, MARKING |
| ONORM EN 14593-1 : 2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| 02/562273 DC : DRAFT MAY 2002 | BS EN 404 - RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE - FILTER SELF-RESCUER FROM CARBON MONOXIDE - REQUIREMENTS, TESTING, MARKING |
| 02/565107 DC : DRAFT DEC 2002 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS EN 14683:2014 | Medical face masks. Requirements and test methods |
| UNI EN 14387 : 2008 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 15333-2:2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| 17/30359567 DC : 0 | BS EN 14683 - MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| ISO 16972:2010 | Respiratory protective devices Terms, definitions, graphical symbols and units of measurement |
| PREN 12021 : DRAFT 2012 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED GASES FOR BREATHING APPARATUS |
| EN 14683:2014 | Medical face masks - Requirements and test methods |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| EN 1073-1:2016/AC:2016 | PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT |
| UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
| I.S. EN 14683:2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| BS EN 14593-1:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking |
| DIN EN 14435 E : 2004 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH HALF MASK DESIGNED TO BE USED WITH POSITIVE PRESSURE ONLY - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14529 E : 2006 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH HALF MASK DESIGNED TO INCLUDE A POSITIVE PRESSURE LUNG GOVERNED DEMAND VALVE FOR ESCAPE PURPOSES ONLY |
| BS EN 13794:2002 | Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking |
| BS EN 14529:2005 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| BS EN 1146:2005 | Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking |
| BS EN 1061:1997 | Respiratory protective devices for self-rescue. Self-contained closed-circuit breathing apparatus. Chemical oxygen (NaClO<sub>3</sub>) escape apparatus. Requirements, testing, marking |
| BS EN 139:1995 | Respiratory protective devices. Compressed air line breathing apparatus for use with a full face mask, half mask or a mouthpiece assembly. Requirements, testing, marking |
| ISO 10882-1:2011 | Health and safety in welding and allied processes Sampling of airborne particles and gases in the operator's breathing zone Part 1: Sampling of airborne particles |
| BS EN 402:2003 | Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape. Requirements, testing, marking |
| BS EN 529:2005 | Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document |
| BS EN 13274-2:2001 | Respiratory protective devices. Methods of test Practical performance tests |
| BS EN 13274-1:2001 | Respiratory protective devices. Methods of test Determination of inward leakage and total inward leakage |
| BS EN 12021:2014 | Respiratory equipment. Compressed gases for breathing apparatus |
| BS EN 135:1999 | Respiratory protective devices. List of equivalent terms |
| BS EN 13274-6:2002 | Respiratory protective devices. Methods of test Determination of carbon dioxide content of the inhalation air |
| BS EN 403:2004 | Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking |
| BS EN 13274-3:2001 | Respiratory protective devices. Methods of test Determination of breathing resistance |
| I.S. EN 149:2001 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 136:1998 | Respiratory protective devices. Full face masks. Requirements, testing, marking |
| BS EN 13274-8:2002 | Respiratory protective devices. Methods of test Determination of dolomite dust clogging |
| BS EN 405 : 2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 145:1998 | Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking |
| BS EN 943-1:2015+A1:2019 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Performance requirements for Type 1 (gas-tight) chemical protective suits |
| BS EN 271:1995 | Respiratory protective devices. Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations. Requirements, testing, marking |
| BS EN 404:2005 | Respiratory protective devices for self-rescue. Filter self-rescuer from carbon monoxide with mouthpiece assembly |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| BS EN 378-3:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection |
| BS EN 12941 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| BS EN 14593-2:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a half mask at positive pressure. Requirements, testing, marking |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 403:2004 | Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
| EN 14529:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 402:2003 | Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
| EN 15333-2:2009 | Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus |
| EN 1827:1999+A1:2009 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| EN 13949:2003 | Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking |
| EN 400 : 1993 | RESPIRATORY PROTECTIVE DEVICES FOR SELF RESCUE - SELF CONTAINED CLOSED CIRCUIT BREATHING APPARATUS - COMPRESSED OXYGEN ESCAPE APPARATUS - REQUIREMENTS, TESTING, MARKING |
| EN 14435:2004 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking |
| EN 145:1997/A1:2000 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE - REQUIREMENTS, TESTING, MARKING |
| EN ISO 10882-1:2011 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
| EN 401 : 1993 | RESPIRATORY PROTECTIVE DEVICES FOR SELF RESCUE - SELF CONTAINED CLOSED CIRCUIT BREATHING APPARATUS - CHEMICAL OXYGEN (KO2) ESCAPE APPARATUS - REQUIREMENTS, TESTING, MARKING |
| EN 1835 : 1999 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN 405:2001+A1:2009 | Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
| EN 270 : 94 AMD 1 2000 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN 139:1994/A1:1999 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS FOR USE WITH A FULL FACE MASK, HALF MASK OR A MOUTHPIECE ASSEMBLY - REQUIREMENTS, TESTING, MARKING |
| EN 14593-2:2005 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking |
| EN 138:1994 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking |
| EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
| EN 271:1995/AC:1997 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE OR POWERED FRESH AIR HOSE BREATHING APPARATUS INCORPORATING A HOOD FOR USE IN ABRASIVE BLASTING OPERATIONS - REQUIREMENTS, TESTING, MARKING |
| EN 141 : 2000 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
| EN 404:2005 | Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly |
| EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
| I.S. EN 13274-7:2008 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 7: DETERMINATION OF PARTICLE FILTER PENETRATION |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| ADIVP-01 : 2014 | ALLIED GUIDE TO DIVING OPERATIONS |
| PREN 1073-1 : DRAFT 2013 | PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION |
| I.S. EN 12419:1999 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING MARKING |
| DIN EN 15333-1:2008-04 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| 09/30196340 DC : 0 | BS ISO 23269-2 - SHIPS AND MARINE TECHNOLOGY - BREATHING APPARATUS FOR SHIPS - PART 2: BREATHING APPARATUS FOR SHIPBOARD FIREFIGHTERS |
| 02/565106 DC : DRAFT DEC 2002 | BS EN 14593-2 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| 12/30260949 DC : 0 | BS EN 14683 - MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHOD |
| 10/30213584 DC : 0 | BS EN 14143 - RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| BS ISO 16972:2010 | Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement |
| 02/561344 DC : DRAFT MAR 2002 | BS EN 1146 - RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATION A HOOD FOR ESCAPE (COMPRESSED AIR ESCAPE APPARATUS WITH HOOD) - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14593-1:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 14593-1:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 15695-1:2017 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
| EN 14593-1:2018 | Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking |
| ISO 23269-2:2011 | Ships and marine technology — Breathing apparatus for ships — Part 2: Self-contained breathing apparatus for shipboard firefighters |
| EN 15695-1:2017 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
| DIN EN 943-1:2015-11 | PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 1: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS |
| DIN EN 14594 E : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| UNE-EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| BS EN 14435:2004 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only. Requirements, testing, marking |
| BS EN 14387 : 2004 | RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING |
| BS EN 149 : 2001 | RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING |
| BS EN 137:2006 | Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking |
| BS EN 141:2000 | Respiratory protective devices. Gas filters and combined filters. Requirements, testing, marking |
| BS EN 12942 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| BS EN 270:1995 | Respiratory protective devices. Compressed air line breathing apparatus incorporating a hood. Requirements, testing, marking |
| BS EN 1827 : 1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
| EN 13274-6:2001 | Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air |
| EN 13274-2:2001 | Respiratory protective devices - Methods of test - Part 2: Practical performance tests |
| EN 12942:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| DIN EN 133:2002-02 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| DIN EN 14435:2004-10 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking |
| DIN EN 403:2004-08 | Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
| DIN EN 529:2006-01 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| DIN EN 402:2003-09 | LUNG GOVERNED DEMAND SELF-CONTAINED OPEN-CIRCUIT COMPRESSED BREATHING APPARATUS WITH FULL-FACE MASK OR MOUTHPIECE ASSEMBLY FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| EN 15333-1 : 2008/AC : 2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 13274-5:2001 | Respiratory protective devices - Methods of test - Part 5: Climatic conditions |
| EN 13274-8:2002 | Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging |
| DIN EN 12021:1999-01 | RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS |
| DIN EN 404:2005-07 | Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly |
| EN 12083:1998 | Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking |
| EN 145:1997/A1:2000 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE - REQUIREMENTS, TESTING, MARKING |
| EN 269:1994 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
| EN 404:2005 | Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide with mouthpiece assembly |
| EN 12021:2014 | Respiratory equipment - Compressed gases for breathing apparatus |
| PREN 250 : DRAFT 2012 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT SELF-CONTAINED COMPRESSED AIR DIVING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| EN 136:1998/AC:2003 | RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING |
| EN 372 : 1992 | SPECIFICATION FOR SX GAS FILTERS AND COMBINED FILTERS AGAINST SPECIFIC NAMED COMPOUNDS USED IN RESPIRATORY PROTECTIVE EQUIPMENT - REQUIREMENTS, TESTING, MARKING |
| EN 1061 : 1996 | RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS - CHEMICAL OXYGEN (NAC103) ESCAPE APPARATUS - REQUIREMENTS, TESTING, MARKING |
| EN 371 : 1992 | SPECIFICATION FOR AX GAS FILTERS AND COMBINED FILTERS AGAINST LOW BOILING COMPOUNDS USED IN RESPIRATORY PROTECTION EQUIPMENT |
| EN 140:1998/AC:1999 | Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking |
| EN 12941:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN 138:1994 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| EN 135:1998 | Respiratory protective devices - List of equivalent terms |
| EN 401 : 1993 | RESPIRATORY PROTECTIVE DEVICES FOR SELF RESCUE - SELF CONTAINED CLOSED CIRCUIT BREATHING APPARATUS - CHEMICAL OXYGEN (KO2) ESCAPE APPARATUS - REQUIREMENTS, TESTING, MARKING |
| EN 12942:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING |
| EN 402:2003 | Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
| EN 403:2004 | Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
| EN 142:2002 | Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
| EN 400 : 1993 | RESPIRATORY PROTECTIVE DEVICES FOR SELF RESCUE - SELF CONTAINED CLOSED CIRCUIT BREATHING APPARATUS - COMPRESSED OXYGEN ESCAPE APPARATUS - REQUIREMENTS, TESTING, MARKING |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.