EN 13417-3:2001
Current
The latest, up-to-date edition.
10-10-2001
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Specification
4.1 Obligatory specified parameters
4.2 Other obligatory information to be included in the
specification
4.3 Optional specified parameters
4.4 List of existing products
Annex A (informative) Glass fabrics: Bi directional
Annex B (informative) Glass fabrics: Uni directional
Annex C (informative) Carbon fabrics
Annex D (informative) Aramid fabrics
Annex E (informative) Glass fabrics: ROVINGS
Bibliography
1.1This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.1.2The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.1.3The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1. In 4.2 the manufacturer shall define other obligatory information to be included in the specification. Other parameters can be included in the specification by agreement between manufacture and customer. These parameters are defined in clause 4.3.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 13417-3 : 2001 | Identical |
| SN EN 13417-3 : 2001 | Identical |
| NF EN 13417-3 : 2002 | Identical |
| PN EN 13417-3 : 2004 | Identical |
| BS EN 13417-3:2001 | Identical |
| NS EN 13417-3 : 1ED 2002 | Identical |
| I.S. EN 13417-3:2002 | Identical |
| DIN EN 13417-3 E : 2002 | Identical |
| NBN EN 13417-3 : 2001 | Identical |
| UNE-EN 13417-3:2002 | Identical |
| UNI EN 13417-3 : 2002 | Identical |
| DIN EN 13417-3:2002-03 | Identical |
| 14/30273514 DC : 0 | BS ISO 18249 - NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - TESTING OF FIBRE REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA |
| EN 13417-2:2001 | Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements |
| BS EN 13417-1:2001 | Reinforcement. Specifications for woven fabrics Designation |
| BS EN 13417-2:2001 | Reinforcement. Specifications for woven fabrics Methods of test and general requirements |
| BS ISO 18249:2015 | Non-destructive testing. Acoustic emission testing. Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers |
| ISO 18249:2015 | Non-destructive testing Acoustic emission testing Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers |
| EN 13417-1:2001 | Reinforcement - Specifications for woven fabrics - Part 1: Designation |
| ISO 5025:1997 | Reinforcement products Woven fabrics Determination of width and length |
| EN ISO 2078:1994/A1:2015 | TEXTILE GLASS - YARNS - DESIGNATION (ISO 2078:1993/AMD 1:2015) |
| ISO 527-4:1997 | Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| ISO 4603:1993 | Textile glass — Woven fabrics — Determination of thickness |
| EN ISO 527-4:1997 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES |
| ISO 4604:2011 | Reinforcement fabrics Determination of conventional flexural stiffness Fixed-angle flexometer method |
| ISO 3374:2000 | Reinforcement products Mats and fabrics Determination of mass per unit area |
| ISO 1268:1974 | Plastics Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes |
| ISO 4602:2010 | Reinforcements Woven fabrics Determination of number of yarns per unit length of warp and weft |
| ISO 13002:1998 | Carbon fibre Designation system for filament yarns |
| ISO 10548:2002 | Carbon fibre — Determination of size content |
| ISO 472:2013 | Plastics Vocabulary |
| EN ISO 13002 : 1998 | CARBON FIBRE - DESIGNATION SYSTEM FOR FILAMENT YARNS |
| ISO 2113:1996 | Reinforcement fibres — Woven fabrics — Basis for a specification |
| ISO 1886:1990 | Reinforcement fibres Sampling plans applicable to received batches |
| ISO 1887:2014 | Textile glass Determination of combustible-matter content |
| ISO 11567:1995 | Carbon fibre Determination of filament diameter and cross-sectional area |
| ISO 1888:2006 | Textile glass Staple fibres or filaments Determination of average diameter |
| EN ISO 1886 : 1994 | REINFORCEMENT FIBRES - SAMPLING PLANS APPLICABLE TO RECEIVED BATCHES |
| EN ISO 10548:2003/AC:2009 | CARBON FIBRE - DETERMINATION OF SIZE CONTENT |
| ISO 3344:1997 | Reinforcement products — Determination of moisture content |
| EN ISO 3344 : 1997 | REINFORCEMENT PRODUCTS - DETERMINATION OF MOISTURE CONTENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.