Name: EN 1349:2009
Brand: CEN

Industrial process control valves

Published date

11-11-2009

Publisher

Comite Europeen de Normalisation

This European Standard applies to all industrial process control valves (hereafter referred to as control valves).This European Standard specifies the design and performance requirements including material, pressure/temperature ratings, dimensions, testing and marking.The range of nominal size is:-DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 200.The range of PN is:-PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400.The range of Class is:-Class 150; Class 300; Class 600; Class 900; Class 1 500; Class 2 500; Class 4 500.Pinch valves are excluded from the scope of this European Standard.Cast iron Class designated flanges are excluded from the scope of this European Standard.

Committee	CEN/TC 69
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
SN EN 1349 : 2010	Identical
NF EN 1349 : 2009	Identical
UNI EN 1349 : 2010	Identical
UNE-EN 1349:2010	Identical
I.S. EN 1349:2009	Identical
BS EN 1349:2009	Identical
DIN EN 1349 : 2010	Identical
NBN EN 1349 : 2010	Identical
NS EN 1349 : 2009	Identical
NEN EN 1349 : 2009	Identical
PN EN 1349 : 2010	Identical
VDE 0409-1349 : 2010	Identical

16/30338108 DC : DRAFT JULY 2016	BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
04/30111048 DC : 0	EN 88-2 - PRESSURE GOVERNORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2 - PRESSURE GOVERNORS FOR INLET PRESSURES BETWEEN 0.5 BAR AND 5 BAR
08/30187521 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
I.S. EN 593:2017	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
I.S. EN 334:2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
16/30334287 DC : 0	BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
DIN EN 334:2016-05 (Draft)	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 14382:2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 12266-1:2012	Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DIN EN 14382 E : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14382 : 2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
PREN 14382 : DRAFT 2016	GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
06/30148043 DC : 0	EN 88-2 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
04/30117386 DC : DRAFT JUL 2004	EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
ONORM EN 334 : JUN 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 16668:2016	Industrial valves - Requirements and testing for metallic valves as pressure accessories
PREN 13362 : DRAFT 2012	GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
DIN EN 14382:2016-05 (Draft)	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 12266-1:2012	Industrial valves. Testing of metallic valves Pressure tests, test procedures and acceptance criteria. Mandatory requirements
BS EN 334 : 2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 12266-1:2012	INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS
VDI/VDE 2178:2009-07	Fluidic characteristic quantities of quarter turn valves and their determination
VDI/VDE 3844:2014-01	Industrial process control valves - Actuators for control valves
VDI/VDE 2176:2007-09	Fluidic characteristic quantities of vanes and their determination
16/30339483 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
BS EN 16668 : 2016	INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
EN 12569:1999/AC:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
UNI EN 14382 : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 12266-1 : 2012	INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS
13/30287824 DC : 0	BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
PREN 593 : DRAFT 2016	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
09/30202714 DC : 0	BS EN 12266-1 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS
16/30334290 DC : 0	BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
BS EN 12569:1999	Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
EN 14382:2005+A1:2009/AC:2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 334:2005+A1:2009	Gas pressure regulators for inlet pressures up to 100 bar
EN 593:2017	Industrial valves - Metallic butterfly valves for general purposes
BS EN 593:2017	Industrial valves. Metallic butterfly valves for general purposes
UNI EN 334 : 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 12266-1:2013	Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
DIN EN 12266-1:2012-06	Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements

EN 12982:2009	Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
EN 1759-3:2003/AC:2004	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 60534-1:2005	Industrial-process control valves - Part 1: Control valve terminology and general considerations
EN 1759-1:2004	Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN 60534-9 : 2007	INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS
EN 60534-2-4 : 2009	INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY
EN 1092-3:2003/AC:2007	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN 558:2017	Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
EN 12516-1:2014	Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
EN 12516-4:2014	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 60534-2-5:2003	Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
EN 736-2:2016	Valves - Terminology - Part 2: Definition of components of valves
EN ISO 228-1:2003	Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
EN 12266-1:2012	Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
IEC 60534-2-5:2003	Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
ASME B1.20.1 : 2013(R2018)	PIPE THREADS, GENERAL PURPOSE (INCH)
EN 60534-4 : 2006	Industrial-process control valves - Part 4: Inspection and routine testing
IEC 60534-9:2007	Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
EN 12516-3:2002/AC:2003	VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
EN 60534-2-1:2011/AC:2015	INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011)
IEC 60534-4:2006	Industrial-process control valves - Part 4: Inspection and routine testing
EN 60534-2-3:2016	Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
EN 60534-5:2004	Industrial-process control valves - Part 5: Marking
IEC 60534-2-3:2015	Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
EN 12760:2016	Industrial valves - Socket welding ends for steel valves
IEC 60534-7:2010	Industrial-process control valves - Part 7: Control valve data sheet
EN 12516-2:2014	Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
IEC 60534-2-1:2011	Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
EN 1092-2:1997	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 10226-1:2004	Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 19:2016	Industrial valves - Marking of metallic valves
IEC 60534-1:2005	Industrial-process control valves - Part 1: Control valve terminology and general considerations
IEC 60534-5:2004	Industrial-process control valves - Part 5: Marking
ISO 228-1:2000	Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 736-3:2008	Valves - Terminology - Part 3: Definition of terms
1997/23/EC : 1997	DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
IEC 60534-2-4:2009	Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability