EN 13507:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
Superseded date
16-02-2022
Published date
24-02-2010
Publisher
Foreword
1 Scope
2 Normative references
3 Principles
4 Methods of surface preparation
5 Preheating
6 Masking of areas not to be coated
7 Effect of pre-treatment on the fatigue strength
Bibliography
This European Standard specifies the processing of surface preparation for thermal spraying. Important principles indicated in this European Standard should be taken into consideration when surfaces of metallic parts are to be prepared for thermal spraying. This European Standard applies for production of new parts as well as for the repair of worn parts.This European Standard does not apply for thermal spraying in the case of protection against atmospheric corrosion by coatings of zinc and/or aluminium and their alloys, for which EN ISO 2063 applies.
| Committee |
CEN/TC 240
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DS EN 13507 : 2010 | Identical |
| DS EN 13507:2018 | Identical |
| BS EN 13507:2010 | Identical |
| UNI EN 13507 : 2010 | Identical |
| NBN EN 13507 : 2010 | Identical |
| ONORM EN 13507 : 2018 10 01 | Identical |
| ONORM EN 13507 : 2010 | Identical |
| NS EN 13507 : 2010 | Identical |
| UNE-EN 13507:2011 | Identical |
| PN EN 13507 : 2010 | Identical |
| BS EN 13507:2018 | Identical |
| DIN EN 13507:2018-10 | Identical |
| UNI EN 13507:2018 | Identical |
| DIN EN 13507:2016-07 (Draft) | Identical |
| NEN EN 13507:2018 | Identical |
| I.S. EN 13507:2018 | Identical |
| I.S. EN 13507:2010 | Identical |
| NEN EN 13507 : 2010 | Identical |
| NF EN 13507 : 2010 | Identical |
| SN EN 13507 : 2010 | Identical |
| SS EN 13507:2018 | Identical |
| PN EN 13507:2018 | Identical |
| UNE-EN ISO 12670:2016 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| 02/121876 DC : DRAFT APR 2002 | BS ISO 17836 - THERMAL SPRAYING - DETERMINATION OF THE DEPOSITION EFFICIENCY |
| 17/30348374 DC : 0 | BS EN ISO 17836 - THERMAL SPRAYING - DETERMINATION OF THE DEPOSITION EFFICIENCY FOR THERMAL SPRAYING |
| BS EN ISO 12670:2015 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| 09/30196832 DC : 0 | BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| 02/123296 DC : DRAFT SEP 2002 | BS EN ISO 2063 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| BS EN 15340:2007 | Thermal spraying. Determination of shear load resistance of thermally sprayed coatings |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| ISO 14916:2017 | Thermal spraying — Determination of tensile adhesive strength |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| UNI EN ISO 12690 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| UNE-EN ISO 14916:2017 | Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017) |
| 05/30136491 DC : DRAFT JUL 2005 | EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| ISO 2063-2:2017 | Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
| I.S. EN ISO 14920:2015 | THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015) |
| I.S. EN ISO 14921:2010 | THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
| BS EN ISO 12690:2010 | Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
| DIN EN ISO 12670 E : 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| BS EN ISO 14916:2017 | ENISO 14916 Thermal spraying -- Determination of tensile adhesive strength |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| DIN EN ISO 12679 E : 2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| I.S. EN ISO 12670:2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| I.S. EN ISO 2063-2:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
| I.S. EN ISO 14916:2017 | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| ISO 17836:2017 | Thermal spraying — Determination of the deposition efficiency for thermal spraying |
| DIN EN ISO 2063:2005-05 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| DIN EN 15340 E : 2007 | THERMAL SPRAYING - DETERMINATION OF SHEAR LOAD RESISTANCE OF THERMALLY SPRAYED COATINGS |
| UNE-EN ISO 14920:2015 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| UNI EN ISO 14921 : 2011 | THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
| UNE-EN ISO 12690:2011 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| 09/30197687 DC : 0 | BS ISO 14921 - THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
| BS ISO 12670 : 2011 COR 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 03/302675 DC : DRAFT FEB 2003 | EN 14616 - THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| I.S. EN ISO 2063:2005 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| 17/30352980 DC : 0 | BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
| 15/30285031 DC : 0 | BS EN ISO 14916 - THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| 14/30273520 DC : 0 | BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
| 12/30266965 DC : 0 | BS EN ISO 14920 - THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS |
| BS EN ISO 2063-2:2017 | Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
| EN ISO 2063-2:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
| I.S. EN ISO 12690:2010 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| DIN EN ISO 14920:2015-04 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
| ISO 12690:2010 | Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
| BS EN ISO 17834:2003 | Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures |
| ISO 14921:2010 | Thermal spraying Procedures for the application of thermally sprayed coatings for engineering components |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| ISO 14920:2015 | Thermal spraying — Spraying and fusing of self-fluxing alloys |
| BS EN ISO 14920:2015 | Thermal spraying. Spraying and fusing of self-fluxing alloys |
| UNE-EN ISO 14921:2011 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| ISO 17834:2003 | Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures |
| ISO 12670:2011 | Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
| DIN EN 15340:2007-06 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| EN 15340:2007 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| EN ISO 14921:2010 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| EN ISO 14916:2017 | Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017) |
| EN ISO 17834:2003 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003) |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| EN ISO 14920:2015 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
| EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| EN ISO 12670:2015 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| DIN EN ISO 12670:2015-12 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| DIN EN ISO 14916 E : 2017 | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| DIN EN ISO 12690:2011-04 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN ISO 14916:2015-09 (Draft) | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| EN ISO 17836:2017 | Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017) |
| I.S. EN ISO 17836:2017 | THERMAL SPRAYING - DETERMINATION OF THE DEPOSITION EFFICIENCY FOR THERMAL SPRAYING (ISO 17836:2017) |
| DIN EN ISO 17834:2004-02 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003 |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN ISO 14921:2010 | Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components |
| DIN EN 15311:2007-06 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| DIN EN ISO 14921:2011-04 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| EN ISO 12690:2010 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| ISO 11124-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 4: Low-carbon cast-steel shot |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| ISO 11126-9:1999 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 9: Staurolite |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| EN ISO 11124-2:1997 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) |
| ISO 11124-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3: High-carbon cast-steel shot and grit |
| ISO 11126-5:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 5: Nickel refinery slag |
| ISO 11126-8:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| ISO 11126-6:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 6: Iron furnace slag |
| ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
| EN ISO 11126-6:1997 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993) |
| EN ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012) |
| ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
| EN ISO 11126-8:1997 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993) |
| ISO 11124-1:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 1: General introduction and classification |
| ISO 11126-1:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification |
| EN 15520:2007 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
| ISO 11126-10:2017 | Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
| EN ISO 11126-4:1998 | Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) |
| EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
| EN ISO 11126-7:1999 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
| ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
| EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| EN ISO 11126-3:1997 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| EN ISO 11126-9:2004 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999) |
| EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| EN ISO 11124-4:1997 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.