EN 13887:2003
Current
Current
The latest, up-to-date edition.
Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding
Published date
27-08-2003
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety and environment legislation
5 Initial preparative techniques
5.1 General
5.2 Handling
5.3 Cleaning
5.4 Storing
6 Surface modification
6.1 Physical: Mechanical (scarification)
6.2 Physical: Non-mechanical
6.3 Chemical
6.4 Combined procedures
7 Preparative procedures
7.1 General
7.2 Metals
7.3 Plastics
8 Evaluation of durability
Bibliography
This European Standard specifies the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. This European Standard is applicable to metal and plastic surfaces that are commonly encountered.These comprise the following metal and plastic families - the latter including filled versions and suitable paints :METALS: aluminium, chromium, copper, magnesium, nickel, steel (mild), steel (stainless), tin, titanium, zinc.PAINTS: cataphoretic, polyalkyd, polyester, polyepoxide, polyurethane.PLASTICS: thermoplastic: Acrylonitrile/butadiene/styrene plastic (ABS plastic), Polyacetal plastic, Polyacrylic plastic, Polyamide plastic (PA plastic), Poly( butylene terephthalate) (PBT), Polycarbonate plastic (PC plastic), Polyester plastic, Polyetheretherketone (PEEK), Polyethersulfone (PES), Polyethylene plastic (PE plastic), Polyimide, Poly(methyl methacrylate) plastic (PMMA plastic), Poly(phenylene oxide) (PPO), Polypropylene plastic, Polystyrene plastic (PS plastic), Polytetrafluoroethylene (PTFE), Poly(vinyl chloride) plastic (PVC plastic).thermoset: Allylphthalate plastic, Aminoplastic, Cellulose esters, Epoxy plastic, Polyester plastic, Phenolic plastic, Polyurethane (PUR).
| Committee |
CEN/TC 193
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 13887 : 2003 | Identical |
| BS EN 13887:2003 | Identical |
| SN EN 13887 : 2003 | Identical |
| NS EN 13887 : 1ED 2003 | Identical |
| PN EN 13887 : 2005 | Identical |
| NF EN 13887 : 2004 | Identical |
| UNE-EN 13887:2004 | Identical |
| I.S. EN 13887:2003 | Identical |
| UNI EN 13887 : 2004 | Identical |
| DIN EN 13887:2003-11 | Identical |
| PREN 14869-1 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| DIN EN 15870 E : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| 10/30231826 DC : 0 | BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| ONORM EN ISO 11343 : 2005 | ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| BS EN 14869-2:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
| BS EN 14444:2005 | Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test |
| BS EN ISO 14678:2005 | Adhesives. Determination of resistance to flow (sagging) |
| BS EN ISO 11343:2005 | Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method |
| UNE-EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| DIN EN ISO 13445:2006-09 | Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) |
| 05/30131014 DC : DRAFT MAR 2005 | EN 15190 - STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
| PREN 28510-1 : DRAFT 2013 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN EN 15336:2007-05 | Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified) |
| 10/30231832 DC : 0 | BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| DIN EN 1465:2009-07 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| I.S. EN 28510-1:2014 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN EN 28510-1:2014-07 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN EN ISO 11343:2005-08 | ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| I.S. EN 14869-1:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 14869-2:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| I.S. EN 1465:2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| 08/30180284 DC : DRAFT JUNE 2008 | BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| 05/30139282 DC : DRAFT SEP 2005 | EN 15337 - ADHESIVES - DETERMINATION OF SHEAR OF ANAEROBIC ADHESIVES USING PIN-AND-COLLAR SPECIMENS |
| DIN EN 15336 E : 2007 | ADHESIVES - DETERMINATION OF THE TIME TO RUPTURE OF BONDED JOINTS UNDER STATIC LOAD |
| NF EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ISO 4587:2003 | Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN 14869-2 E : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| DIN EN ISO 14678:2005-11 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| DIN EN 14869-1:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN 14869-1:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
| ISO 13445:2003 | Adhesives Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
| BS EN 15336:2007 | Adhesives. Determination of the time to rupture of bonded joints under static load |
| UNI EN 1465 : 2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES |
| UNI EN 14869-2 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| UNI EN 14869-1 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| UNI EN 28510-1 : 2014 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| UNI EN 1966 : 2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| PREN 14869-2 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| 05/30139278 DC : DRAFT SEP 2005 | EN 15336 - ADHESIVES - DETERMINATION OF THE TIME TO RUPTURE OF BONDED JOINTS UNDER STATIC LOAD |
| ISO 11343:2003 | Adhesives Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions Wedge impact method |
| I.S. EN ISO 11343:2005 | ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH-STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| DIN EN 15190 E : 2007 | STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
| BS EN ISO 13445:2006 | Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
| ISO 14678:2005 | Adhesives Determination of resistance to flow (sagging) |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN 15190:2007 | Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
| EN ISO 14678:2005 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| EN 14869-2:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 15336:2007 | Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified) |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN ISO 13445:2006 | Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) |
| EN ISO 11343:2005 | Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003) |
| EN 14444:2005/AC:2008 | Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 28510-1:2014 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel |
| DIN EN 15870:2009-08 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| BS ISO 4587:2003 | Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| 13/30281054 DC : 0 | BS EN 28510-1 - ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN EN 14444 E : 2006 | STRUCTURAL ADHESIVES - QUALITATIVE ASSESSMENT OF DURABILITY OF BONDED ASSEMBLIES - WEDGE RUPTURE TEST |
| DIN EN 14869-1 E : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| BS EN 28510-1:2014 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly 90° peel |
| BS EN 15190:2007 | Structural adhesives. Test methods for assessing long term durability of bonded metallic structures |
| DIN EN 14869-2:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| DIN EN 15190:2007-10 | Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
| DIN EN 14444:2006-01 | Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) |
| EN 2243-5:2005 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests |
| ISO 472:2013 | Plastics Vocabulary |
| EN 923 : 2015 COR 2016 | ADHESIVES - TERMS AND DEFINITIONS |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.