Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
  3.1 Terms and definitions
  3.2 Symbols and abbreviations
  3.3 Three dimensional definition of characteristics
4 Definition documents
  4.1 Introduction
  4.2 Documents to be provided by the customer
  4.3 Documents to be provided by the supplier
5 Conditions of utilization
  5.1 Environmental conditions
  5.2 Operating temperatures
  5.3 Operating conditions
  5.4 Recycling
6 Definition of the product
  6.1 General
       6.1.1 Definition of characteristics
       6.1.2 Mounting conditions
       6.1.3 Ambient conditions
  6.2 Resistance to environmental conditions
       6.2.1 General
       6.2.2 Low temperature
       6.2.3 High temperature
       6.2.4 Ozone
       6.2.5 Oil and petroleum products
       6.2.6 Chemical products
       6.2.7 Abrasion
       6.2.8 Fire behaviour
       6.2.9 Corrosion
       6.2.10 Other conditions
  6.3 Resistance to operating conditions
       6.3.1 Fatigue resistance
       6.3.2 Static creep
       6.3.3 Dynamic creep
       6.3.4 Static relaxation
       6.3.5 Dynamic relaxation
       6.3.6 Other conditions
  6.4 Physical characteristics
       6.4.1 Materials
       6.4.2 Mass
  6.5 Geometrical and dimensional characteristics
       6.5.1 Space envelope
       6.5.2 Dimensions
  6.6 Functional characteristics
       6.6.1 Dimensions under load
       6.6.2 Force under deformation
       6.6.3 Characteristics "force as a function of
              displacement" at constant velocity
       6.6.4 Stiffnesses under sinusoidal motion
       6.6.5 Damping
7 Inspection and test methods
  7.1 General
       7.1.1 General test condition
       7.1.2 Instrumentation
       7.1.3 Definition and preparation of test pieces
  7.2 Resistance to environmental conditions
       7.2.1 General
       7.2.2 Low temperature
       7.2.3 High temperature
       7.2.4 Ozone
       7.2.5 Oil and petroleum
       7.2.6 Chemical products
       7.2.7 Abrasion
       7.2.8 Fire behaviour
       7.2.9 Corrosion
       7.2.10 Other conditions
  7.3 Resistance to operating conditions
       7.3.1 Fatigue resistance
       7.3.2 Static creep
       7.3.3 Dynamic creep
       7.3.4 Static relaxation
       7.3.5 Dynamic relaxation
       7.3.6 Other conditions
  7.4 Physical characteristics
       7.4.1 Materials
       7.4.2 Mass
  7.5 Geometrical and dimensional characteristics
       7.5.1 Space envelope
       7.5.2 Dimensions
  7.6 Functional characteristics
       7.6.1 Dimensions under load
       7.6.2 Force under deformation
       7.6.3 Characteristics "force as a function of
              displacement" at constant velocity
       7.6.4 Stiffnesses under sinusoidal motion
       7.6.5 Damping
8 Marking
Annex A (informative) Design of the test devices and
        analysis of the parasitic deformations during
        stiffness measurement
  A.1 Design of the test devices
  A.2 Analysis of the parasitic deformations
Annex B (informative) Examples of fatigue test
        programme
  B.1 Object
  B.2 "Staircase" method
       B.2.1 Test principle
       B.2.2 Results
  B.3 "Programmed blocks" method
       B.3.1 Line test
       B.3.2 Loads distribution
       B.3.3 Blocks
       B.3.4 Sequence
       B.3.5 Test principle
       B.3.6 Results
Annex C (informative) Recommended tolerances and
        acceptance criteria to characteristics of
        components
  C.1 Object
  C.2 Tolerances and acceptance criteria
Annex D (informative) Recommended measurement velocities
Annex E (informative) Traceability, qualification and
        quality surveillance
  E.1 Traceability
  E.2 Supplier production plant qualification
  E.3 Approval and qualification of the product
       E.3.1 Approval
       E.3.2 Qualification
  E.4 Inspection and quality surveillance
Bibliography