EN 13914-2:2016
Current
The latest, up-to-date edition.
Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering
09-03-2016
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and accessories
5 Essential principles and building programme
6 Design
7 Preparation and application of plasters
8 Maintenance and repair (other than restoration)
Annex A (normative) - Design considerations for work and
acceptance of smooth plaster finishes under aspects
of lighting
Annex B (informative) - Methods of minimizing the occurrence
of cracks
Annex C (informative) - Fixing applied backgrounds
Annex D (informative) - Restoration of plasters
Bibliography
This European Standard deals with the design considerations and essential principles for internal plastering systems and application of plastering systems.The different parts of the EN 13914 series of standards specify requirements and recommendations for detailing, design and material considerations, the selection of mixes and the application of gypsum plasters, gypsum/lime plasters, lightweight plasters, lime/gypsum-, cement- and cement/lime-based plasters, lime-based plasters, clay plasters, silicate plasters, organic plasters, polymer-modified plasters, etc.This standard does not deal with the following:-external finishes;-painting and/or preparation;-impregnations;-structural repair of concrete;-prefabricated fibre-reinforced plaster elements.Owing to the many and varied materials and practices and different climatic conditions in Europe it is not possible for certain aspects of the standard to enter into sufficient detail to be fully usable to practitioners in each country. Such guidance to complement, but not alter, any basic European recommendations is given in documentation prepared by each country. Aspects of this European Standard, the basic recommendations of which may need to be complemented, are indicated where they occur by a footnote referencing this clause.
| DevelopmentNote |
Supersedes PREN 13914-2. (03/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 13914-2:2016 | Identical |
| NF EN 13914-2 : 2016 | Identical |
| DIN EN 13914-2:2016-09 | Identical |
| NEN EN 13914-2 : 2016 | Identical |
| NS EN 13914-2 : 2005 | Identical |
| PN EN 13914-2 : 2016 | Identical |
| UNI EN 13914-2 : 2005 | Identical |
| BS EN 13914-2:2016 | Identical |
| UNE-EN 13914-2:2019 | Identical |
| UNE-EN 13914-2:2006 | Identical |
| SN EN 13914-2 : 2016 | Identical |
| SS-EN 13914-2:2016 | Identical |
| UNI EN 13914-2:2016 | Identical |
| NBN EN 13914-2 : 2016 | Identical |
| PREN 13279-1 : DRAFT 2017 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| 08/30171552 DC : DRAFT JAN 2008 | BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 16566:2014-08 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
| PREN 13658-1 : DRAFT 2017 | METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
| I.S. CEN/TR 15125:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL CEMENT AND/OR LIME PLASTERING SYSTEMS |
| BS EN 16566:2014 | Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards |
| PD CEN/TR 15123:2005 | Design, preparation and application of internal polymer plastering systems |
| DIN EN 13279-1:2008-11 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 16566 E : 2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
| UNI EN 16566 : 2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| I.S. CEN/TR 15123:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL POLYMER PLASTERING SYSTEMS |
| UNI EN 13279-1 : 2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| I.S. EN 16566:2014 | PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
| 17/30357433 DC | BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements |
| 17/30357427 DC | BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering |
| I.S. EN 13279-1:2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| BS EN 13658-1:2005 | Metal lath and beads. Definitions, requirements and test methods Internal plastering |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| UNE-EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| 06/30096144 DC : 0 | EN 998-3 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 3: RENDERING AND PLASTERING MORTAR WITH ORGANIC POLYMER BINDING AGE |
| I.S. CEN/TR 15124:2005 | DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM PLASTERING SYSTEMS |
| DIN EN 13658-1:2005-09 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| CEN/TR 15123:2005 | Design, preparation and application of internal polymer plastering systems |
| CEN/TR 15125:2005 | Design, preparation and application of internal cement and/or lime plastering systems |
| CEN/TR 15124:2005 | Design, preparation and application of internal gypsum plastering systems |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| EN 13914-1:2016 | Design, preparation and application of external rendering and internal plastering - Part 1: External rendering |
| EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| ISO 16120-2:2017 | Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general purpose wire rod |
| EN 16566:2014 | Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
| EN 10244-1:2009/AC:2011 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES |
| EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN 459-1:2015 | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 413-1:2011 | Masonry cement - Part 1: Composition, specifications and conformity criteria |
| EN 13139:2002/AC:2004 | AGGREGATES FOR MORTAR |
| EN ISO 16120-2:2017 | Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (ISO 16120-2:2017) |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 1996-2:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| EN 13055-1:2002/AC:2004 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| EN 13496:2013 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) |
| EN 934-3:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling |
| EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 998-1:2016 | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.