EN 14487-1:2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Sprayed concrete - Part 1: Definitions, specifications and conformity
Withdrawn date
31-12-2007
Published date
02-11-2005
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements for sprayed concrete
6 Specification for sprayed concrete
7 Assessment of conformity
Annex A (informative) Guidelines for definitions,
specification and conformity
for sprayed concrete
Bibliography
This European Standard is applicable to sprayed concrete, to be used for repair and upgrading of structures, for new structures and for strengthening of ground.This European Standard covers:¾classification related to consistence of wet mix;¾environmental exposure classes; young, hardened and fibre reinforced concrete;¾requirements for constituent materials, for concrete composition and for basic mix, for fresh and hardened concrete and all types of fibre reinforced sprayed concrete;¾specification for designed and prescribed mixes;¾conformity.This European Standard is applicable to wet mix as well as dry mix sprayed concrete.The substrates to which sprayed concrete can be applied include:¾ground (rock and soil);¾sprayed concrete;¾different types of formwork;¾structural components constituted of concrete, masonry and steel;¾drainage materials;¾insulating materials.Additional or different requirements may be needed for applications not within this document, for instance-refractory uses.
| Committee |
CEN/TC 104
|
| DevelopmentNote |
Supersedes PREN 14487-1. (06/2006) Supersedes UNE 83600. (08/2006)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DS EN 14487-1 : 2005 | Identical |
| DIN EN 14487-1:2006-03 | Identical |
| UNI EN 14487-1 : 2006 | Identical |
| PN EN 14487-1 : 2007 | Identical |
| UNE-EN 14487-1:2008 | Identical |
| NBN EN 14487-1 : 2006 | Identical |
| I.S. EN 14487-1:2005 | Identical |
| NF EN 14487-1 : 2006 | Identical |
| SN EN 14487-1 : 2005 | Identical |
| NEN EN 14487-1 : 2005 | Identical |
| NS EN 14487-1 : 2005 + NA 2012 | Identical |
| BS EN 14487-1:2005 | Identical |
| ONORM EN 14487-1 : 2006 | Identical |
| UNE-EN 14487-1:2005 | Identical |
| BS EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity General principles for use of products and systems |
| UNI EN 1504-9 : 2009 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| BS EN 14490:2010 | Execution of special geotechnical works. Soil nailing |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| DIN EN 14488-3:2006-09 | Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| DIN EN 1504-3:2006-03 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| UNI EN 14487-2 : 2007 | SPRAYED CONCRETE - PART 2: EXECUTION |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 14487-2:2007-01 | Sprayed concrete - Part 2: Execution |
| DIN EN 934-5:2008-02 | Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
| BS EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair |
| UNI EN 934-5 : 2008 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| EN 14488-3:2006 | Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| DIN EN 14490:2010-11 | Execution of special geotechnical works - Soil nailing |
| DIN EN 1504-9:2008-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPALS FOR THE USE OF PRODUCTS AND SYSTEMS |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| NF EN 14490 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| DIN EN 14490 E : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| I.S. EN 1504-9:2008 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
| UNI EN 14490 : 2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| I.S. EN 14490:2010 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING |
| DIN EN 1504-3:2015-08 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| BS EN 934-5:2007 | Admixtures for concrete, mortar and grout Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling |
| BS EN 14487-2:2006 | Sprayed concrete Execution |
| BS EN 14488-3:2006 | Testing sprayed concrete Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 14490:2010 | Execution of special geotechnical works - Soil nailing |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| EN 934-5:2007 | Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
| EN 14487-2:2006 | Sprayed concrete - Part 2: Execution |
| UNE-EN 1504-9:2011 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| UNE-EN 14490:2013 | Execution of special geotechnical works - Soil nailing |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| ONORM EN 14488-3 : 2006 | TESTING SPRAYED CONCRETE - PART 3: FLEXURAL STRENGTHS (FIRST PEAK, ULTIMATE AND RESIDUAL) OF FIBRE REINFORCED BEAM SPECIMENS |
| EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 12504-3:2005 | Testing concrete in structures - Part 3: Determination of pull-out force |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| ISO 6784:1982 | Concrete Determination of static modulus of elasticity in compression |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 12350-3:2009 | Testing fresh concrete - Part 3: Vebe test |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| ISO 758:1976 | Liquid chemical products for industrial use — Determination of density at 20 degrees C |
| EN 13412:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 14488-4:2005+A1:2008 | Testing sprayed concrete - Part 4: Bond strength of cores by direct tension |
| PREN 14889-2 : DRAFT 2004 | FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY |
| EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| EN 934-5:2007 | Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
| EN 14488-1:2005 | Testing sprayed concrete - Sampling fresh and hardened concrete |
| EN 934-6:2001/A1:2005 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 6: SAMPLING, CONFORMITY CONTROL AND EVALUATION OF CONFORMITY |
| PREN 14488-2 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 2: COMPRESSIVE STRENGTH OF YOUNG SPRAYED CONCRETE |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| ISO 6782:1982 | Aggregates for concrete Determination of bulk density |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.