• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1453-1:2017/AC:2017

Current
Current

The latest, up-to-date edition.

PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
Published date

05-07-2017

European foreword
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Material
5 General characteristics
6 Geometrical characteristics
7 Mechanical characteristics
8 Physical characteristics
9 Performance requirements
10 Sealing rings
11 Adhesives
12 Marking
Annex A (informative) - Guidance for calcium carbonate additives
Annex B (normative) - Utilization of non-virgin material
Annex C (informative) - Product standards
Bibliography

Defines the requirements for structured-wall unplasticized poly (vinyl chloride) (PVC U) pipes and the system intended to be used for soil and waste discharge applications (low and high temperature) inside buildings (application area code 'B').

Committee
CEN/TC 155
DevelopmentNote
Supersedes PREN 1453-1. (01/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DD ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
PD CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
DD ENV 1453-2:2001 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polypropylene (PP)
UNE-EN 14680:2016 Adhesives for non-pressure thermoplastics piping systems - Specifications
BS EN 12380:2002 Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
EN 1123-3:2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
EN 1123-2:2006+A1:2007 Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
ENV 1453-2 : DRAFT 2001 PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Acrylonitrile-butadiene-styrene (ABS)
05/30132479 DC : DRAFT MAY 2005 EN 1123-2 - PIPES AND FITTINGS OF LONGITUDINAL WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
DD ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity
ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Styrene copolymer blends (SAN + PVC)
S.R. CEN/TR 13801:2014 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - THERMOPLASTICS - RECOMMENDED PRACTICE FOR INSTALLATION
ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
DIN EN 1366-3:2009-07 Fire resistance tests for service installations - Part 3: Penetration seals
DIN EN 1124-3:2009-02 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
DIN EN 1123-3:2005-02 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding
DIN EN 15346 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
I.S. EN 15346:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
I.S. EN 14680:2015 ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
I.S. EN 1123-2:2006 PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
I.S. EN 1124-3:2008 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
I.S. EN 1366-3:2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
DD ENV 1566-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity
PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
02/121757 DC : DRAFT APR 2002 BS ISO 19220 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - STYRENE COPOLYMER BLENDS (SAN + PVC)
DD ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity
PREN 15012 : DRAFT 2014 PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR NON PRESSURE SOIL AND WASTE DISCHARGE WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS
DIN EN 14680 E : 2015 ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
DIN EN 1123-2:2007-12 PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
DIN EN 15346:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14680:2015-12 ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
BS EN 1123-2 : 2006 PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
BS EN 1123-3:2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
BS EN 14680:2015 Adhesives for non-pressure thermoplastics piping systems. Specifications
ONORM EN 1366-3 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
UNI EN 1124-3 : 2008 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
UNE-CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
DD ENV 1565-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity
S.R. CEN/TS 1453-2:2017 PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE)
14/30297459 DC : 0 BS EN 15012 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR NON PRESSURE SOIL AND WASTE DISCHARGE WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS
BS EN 1124-3:2008 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems System X. Dimensions
BS EN 1366-3:2009 Fire resistance tests for service installations Penetration seals
UNE-EN 1366-3:2011 Fire resistance tests for service installations - Part 3: Penetration seals
UNI EN 1366-3 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 14680:2015 Adhesives for non-pressure thermoplastics piping systems - Specifications
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
13/30276234 DC : 0 BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
DD ENV 1455-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity
PREN 15346 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
BS EN 15346:2014 Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
EN 12380:2002 Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity
EN 1124-3:2008 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
EN 1366-3:2009 Fire resistance tests for service installations - Part 3: Penetration seals

EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
EN 14814:2016 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
ISO 6259-2:1997 Thermoplastics pipes Determination of tensile properties Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
ISO 13229:2010 Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the viscosity number and K-value
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
ISO 11173:1994 Thermoplastics pipes — Determination of resistance to external blows — Staircase method
ISO 2507-1:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings Test method for airtightness of joints
ISO 3127:1994 Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
EN 14680:2015 Adhesives for non-pressure thermoplastics piping systems - Specifications
EN ISO 3451-5:2002 Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)
ISO 6259-1:2015 Thermoplastics pipes Determination of tensile properties Part 1: General test method
ISO 3126:2005 Plastics piping systems Plastics components Determination of dimensions
ISO 472:2013 Plastics Vocabulary
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 18373-1:2007 Rigid PVC pipes Differential scanning calorimetry (DSC) method Part 1: Measurement of the processing temperature
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
ENV 1453-2 : DRAFT 2001 PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 3451-5:2002 Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
ISO 13257:2010 Thermoplastics piping systems for non-pressure applications Test method for resistance to elevated temperature cycling
ISO 13254:2010 Thermoplastics piping systems for non-pressure applications Test method for watertightness
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 472:2013 Plastics - Vocabulary (ISO 472:2013)
ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.