• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14566:2008+A1:2009

Current
Current

The latest, up-to-date edition.

Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
Published date

05-08-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Evaluation of conformity
7 Designation
8 Marking, labelling and packaging
Annex A (informative) - Examples of fixing types
Annex B (informative) - Sampling procedure for testing
Annex ZA (informative) - Clauses of this European Standard
                         addressing the provisions of the EU
                          Construction Products Directive
Bibliography

This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods.It provides for the evaluation of conformity of the product to this European Standard.This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.

Committee
CEN/TC 241
DevelopmentNote
2008 Edition Re-Issued in August 2009 & incorporates AMD 1 2009. (09/2009)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

FD CEN/TR 16239 : 2011 FD INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS
11/30251991 DC : 0 BS EN 14195 - METAL FRAMING COMPONENTS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 14353 : DRAFT 2016 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14353 E : 2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14353 : 2007 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 16703:2015 Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
BS EN 520 : 2004 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14195:2015-03 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14353:2017 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14195:2014 Metal framing components for gypsum board systems. Definitions, requirements and test methods
I.S. EN 520:2005 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14195:2014 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
14/30293183 DC : 0 BS EN 16703 - ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
DIN EN 16703 E : 2015 ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
UNE-EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 520 : 2009 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 16703:2015-12 ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
DIN EN 14353:2016-02 (Draft) METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
09/30185974 DC : DRAFT FEB 2009 BS EN 520 AMD1 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 16703:2015 ACOUSTICS - TEST CODE FOR DRYWALL SYSTEMS OF PLASTERBOARD WITH STEEL STUDS - AIRBORNE SOUND INSULATION
PREN 14195 : DRAFT 2011 METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14195:2015 Metal framing components for gypsum board systems - Definitions, requirements and test methods
UNE-EN 520:2005 Gypsum plasterboards - Definitions, requirements and test methods
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 16703:2015 Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
EN 14195:2014 Metal framing components for gypsum board systems - Definitions, requirements and test methods
PD CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
16/30332914 DC : 0 BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 16703:2015 Acoustics. Test code for drywall systems of plasterboard with steel studs. Airborne sound insulation
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009)
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
DIN EN 14353:2017-09 METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
ISO 12777-2:2000 Methods of test for pallet joints Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 10143:2006 (edition 2) Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 9001:2015 Quality management systems — Requirements
EN 10230-1:1999 Steel wire nails - Part 1: Loose nails for general applications
EN 338:2016 Structural timber - Strength classes
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN ISO 12777-2 : 2000 METHODS OF TEST FOR PALLET JOINTS - PART 2: DETERMINATION OF WITHDRAWAL AND HEAD PULL-THROUGH RESISTANCE OF PALLET NAILS AND STAPLES
ISO 12777-3:2002 Methods of test for pallet joints Part 3: Determination of strength of pallet joints
EN ISO 12777-3 : 2002 METHODS OF TEST FOR PALLET JOINTS - PART 3: DETERMINATION OF STRENGTH OF PALLET JOINTS
EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods
EN 14195:2014 Metal framing components for gypsum board systems - Definitions, requirements and test methods
EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.