• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14588:2010

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Solid biofuels - Terminology, definitions and descriptions
Superseded date

01-07-2014

Published date

13-10-2010

Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Terms and definitions
Annex A (informative) - Translation
Annex B (informative) - List of terms defined by
        CEN/TS 15357:2006 - Solid recovered fuels
Bibliography
Index

This European Standard defines terms concerned in all standardisation work within the scope of CEN/TC 335. According to CEN/TC 335 this European Standard is applicable to solid biofuels originating from the following sources:-products from agriculture and forestry;-vegetable waste from agriculture and forestry;-vegetable waste from the food processing industry;-wood waste, with the exception of wood waste which may contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coating, and which includes in particular such wood waste from construction- and demolition waste;-cork waste;-fibrous vegetable waste from virgin pulp production and from production of paper from pulp, if it is co-incinerated at the place of production and heat generated is recovered.The embedding of the scope within the biomass/biofuel field is given in Figure 1.NOTE 1CEN/TC 335 considers that wood waste, including wood waste originating from construction and demolition waste are included in the scope of CEN/TC 335 and of the scope of the mandate M/298 "solid biofuels", unless they contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coatings [8].NOTE 2There are more terms included within this European Standard as covered by the mandate due to clarification and differentiation. NOTE 3Changes of ownership of the fibrous vegetable waste between paper and pulp company and the operator of the co-incineration plant in which the waste is used does not affect the inclusion of the waste in the scope of mandate M/298.Other standards with a different scope than this European Standard can have different definitions than this standard.

Committee
CEN/TC 335
DevelopmentNote
Supersedes CEN/TS 14588 & PREN 14588. (11/2010)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
BS EN 14588:2010 Identical
SN EN 14588 : 2010 Identical
UNI EN 14588 : 2010 Identical
NS EN 14588 : 2010 Identical
UNE-EN 14588:2011 Identical
NF EN 14588 : 2011 Identical
PN EN 14588 : 2011 Identical
I.S. EN 14588:2010 Identical
DIN EN 14588:2011-01 Identical
NEN EN 14588 : 2010 Identical
NBN EN 14588 : 2010 Identical

BS EN 15234-5:2012 Solid biofuels. Fuel quality assurance Firewood for non-industrial use
UNE-EN 14961-4:2012 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
BS EN 15234-4:2012 Solid biofuels. Fuel quality assurance Wood chips for non-industrial use
10/30212565 DC : 0 BS EN 14780 - SOLID BIOFUELS - SAMPLE PREPARATION
DIN EN 15297:2011-04 SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN
BS EN 15290:2011 Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti
11/30244615 DC : 0 BS EN 15234-6 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
11/30244599 DC : 0 BS EN 14961-6 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON WOODY PELLETS FOR NON-INDUSTRIAL USE
NF EN 15103 : 2010 SOLID BIOFUELS - DETERMINATION OF BULK DENSITY
NF EN 15104 : 2011 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS
PREN 15234-2 : DRAFT 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
DIN EN ISO 16559 E : 2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014)
UNE-EN 14961-5:2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
I.S. EN 16127:2012 SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS
BS EN 14961-2:2011 Solid biofuels. Fuel specifications and classes Wood pellets for non-industrial use
I.S. EN 14780:2011 SOLID BIOFUELS - SAMPLE PREPARATION
I.S. EN 15149-1:2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
NF EN 14961-3 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
BS EN 14961-3:2011 Solid biofuels. Fuel specifications and classes Wood briquettes for non-industrial use
DIN EN 15234-2:2012-04 Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
BS EN 15210-2:2010 Solid biofuels. Determination of mechanical durability of pellets and briquettes Briquettes
BS EN 15234-6:2012 Solid biofuels. Fuel quality assurance Non-woody pellets for non-industrial use
S.R. CEN/TR 16443:2013 BACKGROUNDS TO THE REVISION OF EN 450-1:2005+A1:2007 - FLY ASH FOR CONCRETE
BS EN 15150:2011 Solid biofuels. Determination of particle density
BS EN 16126:2012 Solid biofuels. Determination of particle size distribution of disintegrated pellets
NF EN 14778 : 2011 SOLID BIOFUELS - SAMPLING
UNE-EN 14778:2013 Solid biofuels - Sampling
CSA ISO/IEC 13273-2 : 2015 ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES
UNI EN 14961-4 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
UNE-EN 15234-4:2012 Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
IWA 13:2014 Multiple resource evaluation guideline
I.S. EN 15297:2011 SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN
I.S. EN 15290:2011 SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI
NF EN 14961-2 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
NF EN 15297 : 2011 SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN
UNI EN 15234-1 : 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
I.S. EN 15234-2:2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
UNI EN 15149-2 : 2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
NF EN 15210-2 : 2011 SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES
UNE-EN 15290:2011 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
BS EN 450-1:2012 Fly ash for concrete Definition, specifications and conformity criteria
EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
EN 14961-5:2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete
EN 15297:2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
EN 14778:2011 Solid biofuels - Sampling
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
EN 14780:2011 Solid biofuels - Sample preparation
EN 15210-2:2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
EN ISO/IEC 13273-2:2016 Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources (ISO/IEC 13273-2:2015)
EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
EN 14961-3:2011 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
DIN EN 16127:2012-05 SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS
EN 15290:2011 Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
EN 14961-2:2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
EN 14961-4:2011 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
UNE-EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DIN EN ISO/IEC 13273-2 E : 2016 ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES (ISO/IEC 13273-2:2015)
BS EN 16127:2012 Solid biofuels. Determination of length and diameter of pellets
BS EN 15105:2011 Solid biofuels. Determination of the water soluble chloride, sodium and potassium content
DIN EN 15234-6:2012-04 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
DIN EN 15234-1:2011-05 Solid biofuels - Fuel quality assurance - Part 1: General requirements
11/30244612 DC : 0 BS EN 15234-5 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
DIN EN 15234-5:2012-04 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
DIN EN 15150:2012-01 SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY
10/30236007 DC : 0 BS EN 16214-1 - SUSTAINABLY PRODUCED BIOMASS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS FOR BIOFUELS AND BIOLIQUIDS - PART 1: TERMINOLOGY
11/30244602 DC : 0 BS EN 15234-2 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
BS EN 15297:2011 Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
DIN EN 14961-6:2012-04 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
11/30239011 DC : 0 BS EN 15150 - SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY
I.S. EN 15234-5:2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
NF EN 15234-6 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
UNI EN 15234-4 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
DIN EN ISO/IEC 13273-2:2016-06 ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES (ISO/IEC 13273-2:2015)
I.S. EN ISO/IEC 13273-2:2016 ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES (ISO/IEC 13273-2:2015)
I.S. EN 14961-5:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
UNI EN 14961-6 : 2012 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
I.S. EN 15150:2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY
BS EN 14780:2011 Solid biofuels. Sample preparation
NF EN 15234-2 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
PREN 15234-4 : DRAFT 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
UNE-EN 15289:2011 Solid biofuels - Determination of total content of sulfur and chlorine
I.S. EN 450-1:2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
DIN EN 14780:2011-09 SOLID BIOFUELS - SAMPLE PREPARATION
BS EN 15289:2011 Solid biofuels. Determination of total content of sulfur and chlorine
DIN EN 16126:2012-05 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS
BS EN 14778:2011 Solid biofuels. Sampling
UNE-EN 15234-2:2012 Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
13/30276433 DC : 0 BS ISO 16995 - SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CONTENT OF CHLORIDE, SODIUM AND POTASSIUM
DIN EN 15105:2011-04 SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT
BS EN 14961-6:2012 Solid biofuels. Fuel specifications and classes Non-woody pellets for non-industrial use
NF EN 14961-5 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
NF EN 14961-6 : 2012 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
UNE-EN 16214-1:2013 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
PD CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete
NF EN 15234-1 : 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
13/30275861 DC : 0 BS EN ISO 16968 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS
14/30231508 DC : 0 BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution Oscillating screen method using sieve apertures of 1 mm and above
DIN EN ISO 16559:2014-12 Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014)
UNE-EN 14961-2:2012 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
DIN EN 14961-2:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
13/30275855 DC : 0 BS EN ISO 16948 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN
I.S. EN 15210-2:2010 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES
DIN EN 15104:2011-04 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS
NF EN 14961-4 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
CSA ISO 16559 : 2015 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS
DIN EN 16214-1:2012-11 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY
NF EN 15234-4 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
I.S. EN 15104:2011 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS
I.S. EN 14961-3:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
UNI EN 16126 : 2012 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS
UNI EN 14778 : 2011 SOLID BIOFUELS - SAMPLING
UNI EN 15149-1 : 2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
UNI EN 15290 : 2011 SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI
NF EN 15290 : 2011 SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI
UNE-EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
UNI EN 15105 : 2011 SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT
UNI EN 15289 : 2011 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE
UNI EN 450-1 : 2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 15104 : 2011 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS
DIN EN 15149-2:2011-01 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
PREN 15234-6 : DRAFT 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
DIN EN 14961-5:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
BS EN 15234-2:2012 Solid biofuels. Fuel quality assurance Wood pellets for non-industrial use
13/30275858 DC : 0 BS EN ISO 16967 - SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS
BS EN 15234-1:2011 Solid biofuels. Fuel quality assurance General requirements
DIN EN 14961-3:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
BS EN 15234-3:2012 Solid biofuels. Fuel quality assurance Wood briquettes for non-industrial use
UNI EN 16127 : 2012 SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS
13/30269796 DC : 0 BS ISO/IEC 13273-2 - ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES
DIN EN 15149-1:2011-01 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
13/30277477 DC : 0 BS EN ISO 16994 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE
UNE-EN ISO 16559:2015 Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014)
PD CEN/TR 16721:2014 Bio-based products. Overview of methods to determine the bio-based content
DIN EN 15234-4:2012-04 Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
UNE-EN 15297:2011 Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
DIN EN 15289:2011-04 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE
10/30212562 DC : 0 BS EN 14778 - SOLID BIOFUELS - SAMPLING
BS EN ISO 16559:2014 Solid biofuels. Terminology, definitions and descriptions
13/30241775 DC : 0 BS EN ISO 16559 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS
BS EN 16214-1:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Terminology
DIN EN 14778:2011-09 SOLID BIOFUELS - SAMPLING
I.S. EN 16126:2012 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF DISINTEGRATED PELLETS
DIN EN 15290:2011-04 SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI
UNI EN 15234-5 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
UNI EN 15210-2 : 2011 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - BRIQUETTES
UNI EN 15234-6 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
UNI EN 15234-3 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
DIN EN 14961-4:2011-09 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
UNE-EN 15149-1:2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
UNI EN 15234-2 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
UNE-EN 14961-6:2012 Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
I.S. EN 15234-3:2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
I.S. EN ISO 16559:2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014)
I.S. EN 14961-4:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
I.S. EN 14961-6:2012 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
UNI EN 14961-3 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
I.S. EN 16214-1:2012 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY
I.S. EN 15105:2011 SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT
I.S. EN 14961-2:2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
UNE-EN 15105:2011 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content
UNE-EN 450-1:2013 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 16214-1:2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology
EN 15234-2:2012 Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use
EN 14961-6:2012 Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
EN 15234-3:2012 Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
EN 15234-4:2012 Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use
EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
EN 15234-5:2012 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
EN 15234-6:2012 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below
UNE-EN 15234-5:2012 Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use
I.S. EN 15149-2:2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
DIN EN 15234-3:2012-04 Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
UNE-EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
NF EN 15234-5 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
11/30244609 DC : 0 BS EN 15234-4 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
DIN EN 15210-2:2011-01 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 2: BRIQUETTES
BS EN 15104:2011 Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods
UNE-EN 15210-2:2011 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes
UNE-EN 14780:2012 Solid biofuels - Sample preparation
BS EN 14961-4:2011 Solid biofuels. Fuel specifications and classes Wood chips for non-industrial use
UNE-EN 14961-3:2012 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
I.S. EN 15234-4:2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
BS EN ISO/IEC 13273-2:2016 Energy efficiency and renewable energy sources. Common international terminology Renewable energy sources
UNI EN 14780 : 2011 SOLID BIOFUELS - SAMPLE PREPARATION
NF EN 15149-2 : 2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
UNI EN 14961-5 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
NF EN 15105 : 2011 SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT
UNE-EN ISO/IEC 13273-2:2016 Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources (ISO/IEC 13273-2:2015)
PREN 15234-5 : DRAFT 2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
UNI EN 15297 : 2011 SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN
UNI EN ISO 16559 : 2014 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS
BS EN 14961-5:2011 Solid biofuels. Fuel specifications and classes Firewood for non-industrial use
NF EN 15234-3 : 2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
S.R. CEN/TR 16721:2014 BIO-BASED PRODUCTS - OVERVIEW OF METHODS TO DETERMINE THE BIO-BASED CONTENT
I.S. EN 14778:2011 SOLID BIOFUELS - SAMPLING
UNE-EN 15149-2:2011 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
UNI EN 14961-2 : 2011 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
UNI EN 15150 : 2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY
UNE-EN 15150:2012 Solid biofuels - Determination of particle density
UNE-EN 15234-6:2012 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
I.S. EN 15234-6:2012 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE
I.S. EN 15289:2011 SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE
UNE-EN 15234-3:2012 Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use
UNE-EN 15234-1:2011 Solid biofuels - Fuel quality assurance - Part 1: General requirements
NF EN 15149-1 : 2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
PREN ISO 16559 : DRAFT 2013 SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO/DIS 16559:2013)
NF EN 15150 : 2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY
UNI EN 16214-1 : 2012 SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY
I.S. EN 15234-1:2011 SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS
ISO/IEC 13273-2:2015 Energy efficiency and renewable energy sources Common international terminology Part 2: Renewable energy sources
ISO 16559:2014 Solid biofuels Terminology, definitions and descriptions
EN 15150:2011 Solid biofuels - Determination of particle density
CEN/TR 16721 : 2014 BIO-BASED PRODUCTS - OVERVIEW OF METHODS TO DETERMINE THE BIO-BASED CONTENT
EN 15289:2011 Solid biofuels - Determination of total content of sulfur and chlorine
EN 15104:2011 Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods
EN 15105:2011 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content
DIN EN 450-1:2012-10 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

ISO 10241:1992 International terminology standards Preparation and layout
PREN 14961-4 : DRAFT 2010 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE
EN 14961-1:2010 Solid biofuels - Fuel specifications and classes - Part 1: General requirements
ASTM E 1126 : 1994 : REV A Standard Terminology Relating to Biomass Fuels (Withdrawn 2003)
PREN 14961-5 : DRAFT 2010 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE
PREN 14961-2 : DRAFT 2010 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE
EN 13965-1 : 2004 COR 2005 CHARACTERIZATION OF WASTE - TERMINOLOGY - PART 1: MATERIAL RELATED TERMS AND DEFINITIONS
PREN 14961-3 : DRAFT 2010 SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
ISO 1213-2:2016 Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.