EN 14733:2005+A1:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
01-05-2013
06-10-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Control procedures
6 Inspection and testing
7 Non-conformity
8 Inspection, measuring and test equipment
9 Records
10 Operative competence
Bibliography
This European Standard specifies Factory Production Control (FPC) requirements for use by the manufacturers ofbituminous emulsions, cut-back and fluxed binders.This European Standard is applicable to the control of bituminous binders where the constituents and compositionare known, having been derived from a prescriptive specification or from the Initial Type Test (ITT) procedure fordemonstration of performance related properties described in the appropriate product standard or from a EuropeanTechnical Approval.NOTE 1 Factory Production Control is a requirement of all harmonised elements of harmonised European Standards andEuropean Technical Approvals for bituminous binders if the CE mark of conformity is to be affixed. The system can also beapplied to non-harmonised elements and to situations where CE marking is not mandatory.NOTE 2 Regulated properties of the products are involved in this document.
| Committee |
CEN/TC 336
|
| DevelopmentNote |
2005 Edition Re-issued in October 2010 & incorporates AMD 1 2010. (10/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 14733:2010-12 | Identical |
| PN EN 14733 : 2009 + A1 2012 | Identical |
| UNE-EN 14733:2006 | Identical |
| UNI EN 14733 : 2010 | Identical |
| NBN EN 14733 : 2005 + A1 2010 | Identical |
| BS EN 14733 : 2005 | Identical |
| NF EN 14733 : 2005 + A1 2010 | Identical |
| I.S. EN 14733:2005 | Identical |
| NS EN 14733 : 2005 + A1 2010 | Identical |
| SN 670215-NA : 2005 | Identical |
| NEN EN 14733 : 2005 + A1 2010 | Identical |
| DIN EN 14733 E : 2010 | Identical |
| SN EN 14733 : 2005 | Identical |
| UNE-EN 14733:2006+A1:2011 | Identical |
| BS EN 14733:2005+A1:2010 | Identical |
| 07/30170907 DC : DRAFT AUG 2007 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| 05/30138350 DC : DRAFT AUG 2005 | EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUTBACK AND FLUXED BITUMINOUS BINDERS |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 14769:2012 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
| EN 13589:2008 | Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 15626:2016 | Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| PREN 13074-1 : DRAFT 2017 | BS EN 13074-1 - BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 1: RECOVERY BY EVAPORATION |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| PREN 13074-2 : DRAFT 2017 | BITUMEN AND BITUMINOUS BINDERS - RECOVERY OF BINDER FROM BITUMINOUS EMULSION OR CUT-BACK OR FLUXED BITUMINOUS BINDERS - PART 2: STABILISATION AFTER RECOVERY BY EVAPORATION |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 13703:2003 | Bitumen and bituminous binders - Determination of deformation energy |
| EN 1428:2012 | Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
| EN 13358:2010 | Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| PREN 12846-1 : DRAFT 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 1: BITUMINOUS EMULSIONS |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| EN 13588:2017 | Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
| EN 12847:2009 | Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12850:2009 | Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| PREN 12846-2 : DRAFT 2008 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME BY THE EFFLUX VISCOMETER - PART 2: CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| EN 12848:2009 | Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions |
| EN 13614:2011 | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.