• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14893:2014

Current
Current

The latest, up-to-date edition.

LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
Published date

21-05-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Design
6 Workmanship and manufacture
7 Initial inspection and testing
8 Surface treatment and finishing
9 Marking
10 Conformity assessment
11 Design type testing
12 Records and documentation
Annex A (informative) - Guidance on selection of
        material grades
Annex B (normative) - Tolerances on drums
Annex C (normative) - Hydraulic pressure test
Annex D (normative) - Imperfections of welded joints
Annex E (normative) - Design formulae for drums
Annex F (informative) - Measurement of shell peaking
Annex G (informative) - Examples of welded joints
Annex H (informative) - Environmental checklist
Bibliography

This European Standard specifies the minimum requirements for the material, design, construction, workmanship, equipping, inspection and testing at manufacture of transportable, refillable welded steel pressure drums of volumes over 150 l up to and including 1 000 l for Liquefied Petroleum Gases (LPG).Vertical and horizontal cylindrical receptacles are covered.

Committee
CEN/TC 286
DevelopmentNote
Supersedes PREN 14893. (06/2014)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
UNI EN 14893 : 2014 Identical
NEN EN 14893 : 2014 Identical
UNE-EN 14893:2014 Identical
DIN EN 14893:2014-09 Identical
BS EN 14893:2014 Identical
PN EN 14893 : 2014 Identical
DIN EN 14893 E : 2014 Identical
NBN EN 14893 : 2014 Identical
NF EN 14893 : 2014 Identical
SN EN 14893 : 2014 Identical
I.S. EN 14893:2014 Identical
NS EN 14893 : 2014 Identical

12/30248690 DC : 0 BS EN 14894 - LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
DIN EN 13109:2011-04 LPG equipment and accessories - LPG tanks and drums - Disposal
EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
DIN EN 14894 E : 2013 EQUIPEMENTS POUR GAZ DE PETROLE LIQUEFIE - MARQUAGE DES BOUTEILLES ET DES FUTS A PRESSION
BS EN 13109:2010 LPG equipment and accessories. LPG tanks and drums. Disposal
I.S. EN 14894:2013 LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
I.S. EN 13109:2010 LPG EQUIPMENT AND ACCESSORIES - LPG TANKS AND DRUMS - DISPOSAL
PREN 14894 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
DIN EN 14894:2013-06 LPG equipment and accessories - Cylinder and drum marking
UNE-EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
UNI EN 13109 : 2011 LPG EQUIPMENT AND ACCESSORIES - LPG TANKS AND DRUMS - DISPOSAL
UNE-EN 13109:2011 LPG equipment and accessories - LPG tanks and drums - Disposal
BS EN 14894:2013 LPG equipment and accessories. Cylinder and drum marking
10/30204395 DC : 0 BS EN 14894 - LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
UNI EN 14894 : 2013 LPG EQUIPMENT AND ACCESSORIES - CYLINDER AND DRUM MARKING
EN 13109:2010 LPG equipment and accessories - LPG tanks and drums - Disposal

ISO 17636-1:2013 Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
ISO 6520-1:2007 Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
EN ISO 19232-3:2013 Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013)
EN 1708-1:2010 Welding - Basic welded joint details in steel - Part 1: Pressurized components
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
EN ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
EN ISO 5173:2010/A1:2011 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
ISO 14024:1999 Environmental labels and declarations Type I environmental labelling Principles and procedures
EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
ISO 2560:2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
ISO 5173:2009 Destructive tests on welds in metallic materials — Bend tests
EN ISO 5178:2011 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001)
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
ISO 17640:2017 Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
EN 10028-5:2017 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 17637:2016 Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
EN ISO 17639:2013 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
ISO 14171:2016 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification
ISO 19232-3:2013 Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes
EN ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
ISO 11114-2:2013 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
ISO 15995:2006 Gas cylinders Specifications and testing of LPG cylinder valves Manually operated
EN ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
ISO 17636-2:2013 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
ISO 17639:2003 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
ISO 17632:2015 Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification
EN ISO 11114-2:2013 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013)
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9162:2013 Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications
CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
ISO 17637:2016 Non-destructive testing of welds Visual testing of fusion-welded joints
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
EN ISO 4136:2012 Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
ISO 9016:2012 Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination
ISO 5178:2001 Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints
EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking
ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 837-2:1997 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
EN ISO 17636-1:2013 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN 14717:2005 Welding and allied processes - Environmental check list
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN ISO 17638:2016 Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
ISO 17638:2016 Non-destructive testing of welds Magnetic particle testing
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.