• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1492-1:2000+A1:2008

Current

Current

The latest, up-to-date edition.

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

Published date

12-11-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
6 Verification of safety requirements
7 Marking
8 Manufacturer's certificate
9 Instructions for use
Annex A (normative) Methods of test to verify safety
        requirements
Annex B (normative) Information for use and maintenance to
        be provided by the manufacturer
Annex C (informative) Guidance to the manufacturer for the
        conduct of type testing to verify the interaction of
        the sewn webbing component with fittings for sling
        type C/Cr in accordance with A.4
Annex D (informative) Suggested content of information to be
        provided by the manufacturer with flat woven webbing
        slings
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive.The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges:a)polyester and polyamide -40°C to 100°C,b)polypropylene -40°C to 80°CThis European Standard does not apply to the types of webbing sling indicated below:a)slings such as bag slings, nets (consisting of several crossed webbings stitched together), ‘adjustable’ slings (containing, for example, intermediate buckles stitched along the webbing), etc.;b)slings made from webbing woven from monofilament yarns;c)slings designed for pre-slinging and intended not to be re-used;This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Committee
CEN/TC 168
DevelopmentNote
2000 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. (01/2009)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

UNI EN 13155 : 2009 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
11/30235004 DC : 0 BS EN 13155 - CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
02/711556 DC : 0 LINKS FOR USE WITH STEEL CHAINS OF GRADE 8
PREN 474-1 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
07/30163456 DC : 0 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 17096:2015 Cranes Safety Load lifting attachments
DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
PREN 13155 : DRAFT 2017 CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 474-1:2006+A6:2019 Earth-moving machinery. Safety General requirements
DIN EN 1677-4:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
DIN EN 1677-1:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
DIN EN 1677-5:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
I.S. EN 1677-2:2000 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
I.S. EN 1677-5:2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
I.S. EN 1677-3:2001 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
I.S. EN 1677-6:2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
I.S. EN 1677-4:2001 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
I.S. EN 1677-1:2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
I.S. EN 13155:2003 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
UNI EN 1677-6 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
08/30173492 DC : DRAFT JAN 2008 BS EN 12195-1 - LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 1: CALCULATION OF SECURING FORCES
I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 1677-2:2008-06 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
DIN EN 1677-3:2008-06 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS, GRADE 8
DIN EN 1677-6:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
DIN EN 13155:2009-08 Cranes - Safety - Non-fixed load lifting attachments (includes Amendment A2:2009)
BS EN 1677-3 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
UNI EN 1677-1 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
UNI EN 1677-4 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
UNI EN 1677-3 : 2008 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
UNI EN 1677-5 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
UNI EN 1677-2 : 2008 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
BS EN 1677-1 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
BS EN 1677-5 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
BS EN 13155 : 2003 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 1677-4 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8
EN 1677-3:2001+A1:2008 Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
ISO 16798:2004 Links of Grade 8 for use with slings
14/30285289 DC : 0 BS EN 13155 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
17/30360261 DC : 0 BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 1677-2 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
BS EN 1677-6 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4

EN ISO 5084 : 1996 TEXTILES - DETERMINATION OF THICKNESS OF TEXTILES AND TEXTILE PRODUCTS
ISO/IEC Guide 62:1996 General requirements for bodies operating assessment and certification/registration of quality systems
ISO 12480-1:1997 Cranes Safe use Part 1: General
EN 10002-2 : 1991 METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE
ISO 5084:1996 Textiles Determination of thickness of textiles and textile products
ISO 2076:2013 Textiles Man-made fibres Generic names
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
ISO 9002:1994 Quality systems — Model for quality assurance in production, installation and servicing
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN 45012 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.