EN 14961-1:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Solid biofuels - Fuel specifications and classes - Part 1: General requirements
Superseded date
01-05-2014
Published date
13-01-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Classification of origin and sources of solid biofuels
7 Specification of solid biofuels based on traded forms
and properties
Annex A (informative) Illustrations of typical forms of
wood fuels
Annex B (informative) Typical values of solid biomass fuels
Annex C (informative) Examples of possible causes for
deviant levels for different properties and of
consequences of handling and treatments for the
properties of biomass
Annex D (informative) Calculation of the net calorific
value at different bases and energy density as
received
Bibliography
This European Standard determines the fuel quality classes and specifications for solid biofuels. According to the mandate given for the standardisation work, the scope of the CEN/TC 335 only includes solid biofuels originating from the following sources:a)products from agriculture and forestry;b)vegetable waste from agriculture and forestry;c)vegetable waste from the food processing industry;d)wood waste, with the exception of wood waste which can contain halogenated organic compounds or heavy metals as a result of treatment with wood preservatives or coating, and which includes in particular such wood waste originated from construction and demolition waste;e)fibrous vegetable waste from virgin pulp production and from production of paper from pulp, if it is co-incinerated at the place of production and heat generated is recovered;f)cork waste.NOTE 1For the avoidance of doubt, demolition wood is not included in the scope of this European Standard. Demolition wood is "used wood arising from demolition of buildings or civil engineering installations" (CEN/TS 14588).NOTE 2Aquatic biomass is not included in the scope of this European Standard.
| Committee |
CEN/TC 335
|
| DevelopmentNote |
Supersedes CEN/TS 14961. (02/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 14961-1 : 2010 | Identical |
| NS EN 14961-1 : 2010 | Identical |
| I.S. EN 14961-1:2010 | Identical |
| DIN EN 14961-1:2010-04 | Identical |
| PN EN 14961-1 : 2010 | Identical |
| NF EN 14961-1 : 2010 | Identical |
| SN EN 14961-1 : 2010 | Identical |
| BS EN 14961-1:2010 | Identical |
| UNE-EN 14961-1:2011 | Identical |
| UNI EN 14961-1 : 2010 | Identical |
| NEN EN 14961-1 : 2010 | Identical |
| BS EN 15234-5:2012 | Solid biofuels. Fuel quality assurance Firewood for non-industrial use |
| UNE-EN 14961-4:2012 | Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use |
| BS EN 15234-4:2012 | Solid biofuels. Fuel quality assurance Wood chips for non-industrial use |
| 10/30212565 DC : 0 | BS EN 14780 - SOLID BIOFUELS - SAMPLE PREPARATION |
| 10/30219396 DC : 0 | BS EN 15297 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| DIN EN 15297:2011-04 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| 11/30244615 DC : 0 | BS EN 15234-6 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 11/30244599 DC : 0 | BS EN 14961-6 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON WOODY PELLETS FOR NON-INDUSTRIAL USE |
| PREN 15234-2 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| DIN EN ISO 16559 E : 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
| UNE-EN 14961-5:2011 | Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use |
| BS EN 14961-2:2011 | Solid biofuels. Fuel specifications and classes Wood pellets for non-industrial use |
| 10/30219399 DC : DRAFT JULY 2010 | BS EN 15296 - SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| I.S. EN 15149-1:2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| NF EN 14961-3 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| BS EN 14961-3:2011 | Solid biofuels. Fuel specifications and classes Wood briquettes for non-industrial use |
| BS EN 15234-6:2012 | Solid biofuels. Fuel quality assurance Non-woody pellets for non-industrial use |
| 11/30239011 DC : 0 | BS EN 15150 - SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| BS EN 15150:2011 | Solid biofuels. Determination of particle density |
| UNI EN 14961-4 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| UNE-EN 15234-4:2012 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| I.S. EN 15297:2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| I.S. EN 15149-2:2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| NF EN 14961-2 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15234-1 : 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15234-2:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15149-2 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| EN 15149-1:2010 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
| EN 14961-5:2011 | Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use |
| EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| EN 15149-2:2010 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| EN 14961-3:2011 | Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use |
| EN 15296:2011 | Solid biofuels - Conversion of analytical results from one basis to another |
| DIN EN 16127:2012-05 | SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS |
| EN 14588:2010 | Solid biofuels - Terminology, definitions and descriptions |
| EN 14961-2:2011 | Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use |
| EN 14961-4:2011 | Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use |
| EN ISO 16559 : 2014 COR 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
| UNE-EN 16127:2012 | Solid biofuels - Determination of length and diameter of pellets |
| BS EN 16127:2012 | Solid biofuels. Determination of length and diameter of pellets |
| DIN EN 15234-6:2012-04 | Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use |
| 11/30244612 DC : 0 | BS EN 15234-5 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| DIN EN 15234-5:2012-04 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| DIN EN 15150:2012-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| 11/30244602 DC : 0 | BS EN 15234-2 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 16127:2012 | SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS |
| DIN EN 14961-6:2012-04 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 10/30219009 DC : 0 | BS EN 15234-1 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 15234-5:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| NF EN 15234-6 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| PREN 14961-3 : DRAFT 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNI EN 15234-4 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| I.S. EN 14961-5:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNI EN 14961-6 : 2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 15150:2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| NF EN 15234-2 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| CSA ISO 16994 : 2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| PREN 15234-4 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| UNE-EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| VDI 3462 Blatt 1:2014-12 | Emission control - Wood machining and processing - Raw wood processing |
| DIN EN 15149-2:2011-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| BS EN 15289:2011 | Solid biofuels. Determination of total content of sulfur and chlorine |
| UNE-EN 15234-2:2012 | Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use |
| BS EN 14961-6:2012 | Solid biofuels. Fuel specifications and classes Non-woody pellets for non-industrial use |
| NF EN 14961-5 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| NF EN 15296 : 2011 | SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| NF EN 14961-6 : 2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| 10/30219095 DC : 0 | BS EN 15149-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: HORIZONTAL SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| 10/30218997 DC : 0 | BS EN 14961-2 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| NF EN 15234-1 : 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| 13/30275861 DC : 0 | BS EN ISO 16968 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS |
| BS EN 15149-1:2010 | Solid biofuels. Determination of particle size distribution Oscillating screen method using sieve apertures of 1 mm and above |
| DIN EN ISO 16559:2014-12 | Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) |
| DIN EN 14961-2:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNE-EN 14961-2:2012 | Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use |
| DIN EN 15296:2011-04 | SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| 13/30277482 DC : 0 | BS EN ISO 16993 - SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| CSA ISO 16559 : 2015 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| NF EN 15234-4 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| I.S. EN 14961-3:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNI EN 15149-1 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| EN 16127:2012 | Solid biofuels - Determination of length and diameter of pellets |
| UNI EN 15289 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| UNI EN 14588 : 2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| 10/30219003 DC : 0 | BS EN 14961-4 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| DIN EN 14961-5:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| BS EN 15234-2:2012 | Solid biofuels. Fuel quality assurance Wood pellets for non-industrial use |
| BS EN 15296:2011 | Solid biofuels. Conversion of analytical results from one basis to another |
| 15/30275872 DC : 0 | BS EN ISO 17827-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW |
| BS EN 15234-1:2011 | Solid biofuels. Fuel quality assurance General requirements |
| DIN EN 14961-3:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| BS EN 15234-3:2012 | Solid biofuels. Fuel quality assurance Wood briquettes for non-industrial use |
| UNI EN 16127 : 2012 | SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS |
| DIN EN 15149-1:2011-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| 13/30277477 DC : 0 | BS EN ISO 16994 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| UNE-EN ISO 16559:2015 | Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) |
| DIN EN 15289:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| BS EN 15297:2011 | Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| DIN EN 15234-4:2012-04 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| UNE-EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| BS EN ISO 16559:2014 | Solid biofuels. Terminology, definitions and descriptions |
| 13/30241775 DC : 0 | BS EN ISO 16559 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI EN 15234-5 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNI EN 15234-6 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15234-3 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| DIN EN 14961-4:2011-09 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| UNE-EN 15149-1:2011 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
| UNI EN 15234-2 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 15234-3:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNE-EN 14961-6:2012 | Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use |
| UNI EN 15296 : 2011 | SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| I.S. EN ISO 16559:2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
| I.S. EN 14961-4:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| I.S. EN 14961-6:2012 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 14961-3 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| I.S. EN 15296:2011 | SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| I.S. EN 14961-2:2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| EN 15234-2:2012 | Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use |
| EN 14961-6:2012 | Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use |
| EN 15234-3:2012 | Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use |
| EN 15234-4:2012 | Solid biofuels - Fuel quality assurance - Part 4: Wood chips for non-industrial use |
| EN 15234-5:2012 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| EN 15234-6:2012 | Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use |
| DIN EN 15234-1:2011-05 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| BS EN 15149-2:2010 | Solid biofuels. Determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below |
| UNE-EN 15234-5:2012 | Solid biofuels - Fuel quality assurance - Part 5: Firewood for non-industrial use |
| DIN EN 15234-3:2012-04 | Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use |
| UNE-EN 15296:2011 | Solid biofuels - Conversion of analytical results from one basis to another |
| PREN 15234-6 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 14588:2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| NF EN 15234-5 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| 11/30244609 DC : 0 | BS EN 15234-4 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| 10/30219000 DC : 0 | BS EN 14961-3 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| 10/30219097 DC : 0 | BS EN 15149-1 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| 10/30219006 DC : 0 | BS EN 14961-5 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| BS EN 14961-4:2011 | Solid biofuels. Fuel specifications and classes Wood chips for non-industrial use |
| UNE-EN 14961-3:2012 | Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use |
| I.S. EN 15234-4:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 4: WOOD CHIPS FOR NON-INDUSTRIAL USE |
| PREN 14961-2 : DRAFT 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| 10/30219387 DC : 0 | BS EN 15289 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| NF EN 15149-2 : 2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| UNI EN 14961-5 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| DIN EN 15234-2:2012-04 | Solid biofuels - Fuel quality assurance - Part 2: Wood pellets for non-industrial use |
| PREN 15234-5 : DRAFT 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 5: FIREWOOD FOR NON-INDUSTRIAL USE |
| UNI EN ISO 16559 : 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI EN 15297 : 2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| BS EN 14961-5:2011 | Solid biofuels. Fuel specifications and classes Firewood for non-industrial use |
| NF EN 15234-3 : 2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 3: WOOD BRIQUETTES FOR NON-INDUSTRIAL USE |
| UNE-EN 15149-2:2011 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| UNI EN 14961-2 : 2011 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 2: WOOD PELLETS FOR NON-INDUSTRIAL USE |
| UNI EN 15150 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| UNE-EN 15150:2012 | Solid biofuels - Determination of particle density |
| UNE-EN 15234-6:2012 | Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use |
| I.S. EN 15234-6:2012 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 6: NON-WOODY PELLETS FOR NON-INDUSTRIAL USE |
| I.S. EN 15289:2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| UNE-EN 15234-3:2012 | Solid biofuels - Fuel quality assurance - Part 3: Wood briquettes for non-industrial use |
| UNE-EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| NF EN 15149-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| PREN ISO 16559 : DRAFT 2013 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO/DIS 16559:2013) |
| NF EN 15150 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE DENSITY |
| I.S. EN 15234-1:2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| ISO 16559:2014 | Solid biofuels Terminology, definitions and descriptions |
| BS EN 14588:2010 | Solid biofuels. Terminology, definitions and descriptions |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 15150:2011 | Solid biofuels - Determination of particle density |
| EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| DIN EN 14588:2011-01 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| CEN/TS 15210-2:2005 | Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 2: Briquettes |
| EN 15103:2009 | Solid biofuels - Determination of bulk density |
| CEN/TS 15104:2005 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| CEN/TS 15370-1:2006 | Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method |
| CEN/TS 15290:2006 | Solid Biofuels - Determination of major elements |
| CEN/TS 15150:2005 | Solid biofuels - Methods for the determination of particle density |
| EN 15148:2009 | Solid biofuels - Determination of the content of volatile matter |
| EN 15210-1:2009 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
| CEN/TS 15105:2005 | Solid biofuels - Methods for determination of the water soluble content of chloride, sodium and potassium |
| EN 14918:2009 | Solid biofuels - Determination of calorific value |
| EN 14774-2:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method |
| EN 13556:2003 | Round and sawn timber - Nomenclature of timbers used in Europe |
| CEN/TS 15149-2:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| PREN 14588 : DRAFT 2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| CEN/TS 15296:2006 | Solid Biofuels - Calculation of analyses to different bases |
| EN 14775:2009 | Solid biofuels - Determination of ash content |
| CEN/TS 15234:2006 | Solid biofuels - Fuel quality assurance |
| CEN/TS 15149-1:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above |
| CEN/TS 15297:2006 | Solid Biofuels - Determination of minor elements |
| EN 14774-1:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method |
| EN 14774-3:2009 | Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample |
| CEN/TS 15289:2006 | Solid Biofuels - Determination of total content of sulphur and chlorine |
| CEN/TS 14780:2005 | Solid biofuels - Methods for sample preparation |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.