EN 1542:1999
Current
Current
The latest, up-to-date edition.
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
Published date
21-04-1999
Publisher
Foreword
1 Scope
2 Normative references
3 Principle
4 Equipment
5 Preparation
5.1 Preparation of the surface for application of the product
5.2 Number of test specimens
6 Procedure
6.1 Applying the repair products or system
6.2 Storage
7 Carrying out test
7.1 Core drilling
7.2 Applying the dolly
7.3 Setting the pull-off equipment
7.4 Applying the load
7.5 Determination of the type of failure
7.6 Validity of the test result
7.7 Calculation
8 Test report
Annex A (normative) summary of temperatures and humidities for the
curing, conditioning and testing of repair products and systems
A.1 Curing
A.2 Conditioning and testing
This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method for measuring the tensile bond strength of grouts, mortars, concretes and surface protection systems (SPS) used for the protection and repair of concrete. The provisions of the standard are applicable to products and systems applied to a maximum thickness of 50 mm.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 1542:1999-07 | Identical |
| I.S. EN 1542:1999 | Identical |
| PN EN 1542 : 2000 | Identical |
| UNE-EN 1542:2000 | Identical |
| SN EN 1542 : 1999 | Identical |
| NS EN 1542 : 1ED 1999 | Identical |
| NBN EN 1542 : 1999 | Identical |
| BS EN 1542:1999 | Identical |
| NEN EN 1542 : 1999 | Identical |
| UNI EN 1542 : 2000 | Identical |
| NF EN 1542 : 1999 | Identical |
| BS EN 16506:2014 | Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
| DIN EN 16506 E : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 16506:2014-12 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| 16/30337086 DC : DRAFT APR 2016 | BS EN 1504-4 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
| PREN 1766 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| UNE-EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| DIN EN 13500:2003-12 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) BASED ON MINERAL WOOL - SPECIFICATION |
| DIN EN 13499:2003-12 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification; German version EN 13499:2003 |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| BS EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thermal cycling without de-icing salt impact |
| BS EN 13499:2003 | Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on expanded polystyrene. Specification |
| BS EN 13578:2003 | Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
| BS EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thunder-shower cycling (thermal shock) |
| BS EN 12636:1999 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete |
| EN 13500:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification |
| EN 13499:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification |
| DIN EN 1766:2017-05 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
| EN 12636:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 14/30285784 DC : 0 | BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| 01/102985 DC : DRAFT MAR 2001 | PREN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 12/30256053 DC : 0 | BS EN 16383 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS) |
| 02/104236 DC : DRAFT JUNE 2002 | EN 14487-1 - SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| BS EN 1766:2017 | Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing |
| I.S. EN 1766:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| DIN EN 13687-5:2002-05 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE THERMAL COMPATIBILITY - PART 5: RESISTANCE TO TEMPERATURE SHOCK |
| DIN EN 13687-2:2002-05 | Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002 |
| DIN EN 13687-1:2002-05 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THERMAL COMPATIBILITY - PART 1: FREEZE-THAW CYCLING WITH DE-ICING SALT IMMERSION |
| DIN EN 13578:2004-03 | Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003 |
| DIN EN 13687-3:2002-05 | Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002 |
| DIN EN 1504-3:2006-03 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| DIN EN 13687-4:2002-05 | Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002 |
| I.S. EN 14487-1:2005 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 1504-4 : DRAFT 2016 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
| PREN 16506 : DRAFT 2012 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| UNI EN 16506 : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| BS EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| DIN EN 934-5:2008-02 | Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
| DIN EN 1766:2015-07 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| BS EN 12188:1999 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents |
| BS EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Application of repair mortar overhead |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| EN 16506:2014 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| UNI EN 934-5 : 2008 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 13687-5:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock |
| 12/30275810 DC : 0 | BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| 03/310129 DC : DRAFT JULY 2003 | EN 934-5 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY |
| BS EN 16730:2016 | Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
| DIN EN 16730:2016-09 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| 06/30096144 DC : 0 | EN 998-3 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 3: RENDERING AND PLASTERING MORTAR WITH ORGANIC POLYMER BINDING AGE |
| DIN EN 15824 E : 2017 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| DIN EN 1504-3:2015-08 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| BS EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion |
| BS EN 934-5:2007 | Admixtures for concrete, mortar and grout Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling |
| BS EN 14487-1:2005 | Sprayed concrete Definitions, specifications and conformity |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 13687-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Dry thermal cycling |
| BS EN 13500:2003 | Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on mineral wool. Specification |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
| EN 16730:2016 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
| EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
| EN 1766:2017 | Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| EN 13687-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling |
| EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 934-5:2007 | Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
| UNE-EN 16730:2017 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| DIN EN 16730 E : 2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| DIN EN 15824:2015-11 (Draft) | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| 15/30324098 DC : 0 | BS EN 1766 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| I.S. EN 16730:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| 00/103366 DC : DRAFT APR 2000 | PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
| UNE-EN 16506:2015 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| I.S. EN 16506:2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| I.S. EN 15824:2017 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| BS EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Freeze-thaw cycling with de-icing salt immersion |
| BS EN 13687-5:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Resistance to temperature shock |
| EN 12188:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents |
| DIN EN 15824:2017-09 | SPECIFICATIONS FOR EXTERNAL RENDERS AND INTERNAL PLASTERS BASED ON ORGANIC BINDERS |
| EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
| EN 13578:2003 | Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
| EN 24624 : 1992 | PAINTS AND VARNISHES - PULL-OFF TEST |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| PREN 1766 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - REFERENCE CONCRETES FOR TESTING |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.