EN 1766:2017
Current
Current
The latest, up-to-date edition.
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
Published date
08-02-2017
Publisher
European foreword
1 Scope
2 Normative references
3 Principle
4 Equipment
5 Materials
6 Reference concrete mixes
7 Surface preparation and roughness index determination
8 Report
Annex A (informative) - Grading curves
This European Standard specifies the composition, characteristics and preparation procedure for reference concrete substrates which are to be used in the test methods to measure performance requirements of products and systems for the repair and protection of concrete structures.The provisions of this standard are applicable to concrete with a maximum aggregate size of 16 mm or 20 mm or with a maximum aggregate size of 8 mm or 10 mm.
| Committee |
CEN/TC 104
|
| DevelopmentNote |
Supersedes PREN 1766. (02/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 1766:2017-05 | Identical |
| UNI EN 1766:2017 | Identical |
| PN EN 1766 : 2001 | Identical |
| NEN EN 1766 : 2017 | Identical |
| NBN EN 1766 : 2000 | Identical |
| UNE-EN 1766:2000 | Identical |
| NF EN 1766 : 2017 | Identical |
| DIN EN 1766:2015-07 (Draft) | Identical |
| UNI EN 1766 : 2001 | Identical |
| BS EN 1766:2017 | Identical |
| SN EN 1766 : 2017 | Identical |
| NS EN 1766 : 2017 | Identical |
| I.S. EN 1766:2017 | Identical |
| UNE-EN 1766:2019 | Identical |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 16/30337086 DC : DRAFT APR 2016 | BS EN 1504-4 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
| 05/30131382 DC : DRAFT MAR 2005 | BS EN 15184 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION COATED STEEL TO CONCRETE (PULL-OUT TEST) |
| 03/314372 DC : DRAFT DEC 2003 | BS EN 14845-1 - TEST METHODS FOR FIBRES IN CONCRETE - PART 1 - REFERENCE CONCRETES |
| 02/123276 DC : DRAFT AUG 2002 | BS EN 1062-7 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 7: DETERMINATION OF CRACK BRIDGING PROPERTIES |
| 00/103365 DC : DRAFT APR 2000 | PREN 1504-4 - PRODUCTS AND SYSTEMS FOR PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| EN 13375:2004 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| BS EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thermal cycling without de-icing salt impact |
| BS EN 15183:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
| BS EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thunder-shower cycling (thermal shock) |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| BS EN 13294:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time |
| DIN EN 1881:2007-01 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD |
| EN 13294:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
| DIN EN 13733:2002-09 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE DURABILITY OF STRUCTURAL BONDING |
| EN 13295:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
| EN 13057:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
| EN 12618-1:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility |
| EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 01/102985 DC : DRAFT MAR 2001 | PREN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 98/109775 DC : DRAFT NOV 1998 | PREN 13375 - FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING SYSTEMS FOR CONCRETE BRIDGE DECKS AND OTHER SURFACES TRAFFICABLE BY VEHICLES - RULES FOR SAMPLING AND PREPARING TEST SPECIMENS |
| 03/306073 DC : DRAFT APR 2003 | PREN 1544 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS |
| I.S. EN 15812:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| UNE-EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| BS EN 13375:2004 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation |
| DIN EN 14879-5 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS |
| DIN EN 1544:2007-01 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS |
| DIN EN 15184 E : 2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION OF COATED STEEL TO CONCRETE (PULL-OUT TEST) |
| DIN EN 15183 E : 2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
| DIN EN 1504-4:2005-02 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding; German version EN 1504-4:2004 |
| BS EN 13581:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
| BS EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method |
| DIN EN 13687-5:2002-05 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE THERMAL COMPATIBILITY - PART 5: RESISTANCE TO TEMPERATURE SHOCK |
| DIN EN 13687-2:2002-05 | Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002 |
| DIN EN 13375:2004-12 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| DIN EN 13687-1:2002-05 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THERMAL COMPATIBILITY - PART 1: FREEZE-THAW CYCLING WITH DE-ICING SALT IMMERSION |
| DIN EN 13294:2002-09 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF STIFFENING TIME |
| DIN EN 13581:2002-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHOD - DETERMINATION OF LOSS OF MASS OF HYDROPHOBIC IMPREGNATED CONCRETE AFTER FREEZE-THAW SALT STRESS |
| DIN EN 13578:2004-03 | Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003 |
| DIN EN 13580:2002-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - WATER ABSORPTION AND RESISTANCE TO ALKALI FOR HYDROPHOBIC IMPREGNATIONS |
| DIN EN 13579:2002-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DRYING TEST FOR HYDROPHOBIC IMPREGNATION |
| DIN EN 1504-3:2006-03 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| DIN EN 13687-3:2002-05 | Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002 |
| DIN EN 13687-4:2002-05 | Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002 |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 1504-4 : DRAFT 2016 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| DIN EN 15812:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| 03/310120 DC : DRAFT JUNE 2003 | EN 1881 - 2ND CEN ENQUIRY PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PULL-OUT TEST OF REBAR FROM CONCRETE |
| DIN EN 15812 E : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| 05/30131376 DC : DRAFT MAR 2005 | BS EN 15183 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
| I.S. EN 13892-8:2002 | METHODS OF TEST FOR SCREED MATERIALS - PART 8: DETERMINATION OF BOND STRENGTH |
| PREN 13375 : DRAFT 2017 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| DIN EN 14879-3 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| BS EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Application of repair mortar overhead |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| EN 13687-5:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock |
| UNI EN 1881 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD |
| UNI EN 14845-1 : 2007 | TEST METHODS FOR FIBRES IN CONCRETE - PART 1: REFERENCE CONCRETES |
| UNI EN 1544 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS |
| I.S. EN 10080:2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| 96/108350 DC : DRAFT NOV 1996 | PREN 12618-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE ADHESION OF INJECTION PRODUCTS, WITH OR WITHOUT THERMAL CYCLING - PART 3: SLANT SHEAR METHOD |
| UNI EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| 96/108349 DC : DRAFT NOV 1996 | PREN 12618-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE ADHESION OF INJECTION PRODUCTS, WITH OR WITHOUT THERMAL CYCLING - PART 2: TENSILE BOND METHOD |
| NF EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 17/30360281 DC : 0 | BS EN 13375 - FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| DIN EN 1504-3:2015-08 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
| BS EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion |
| BS EN 12618-2:2004 | Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Adhesion by tensile bond strength |
| BS EN 14068:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of watertightness of injected cracks without movement in concrete |
| BS EN 1062-7:2004 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of crack bridging properties |
| BS EN 14845-1:2007 | Test methods for fibres in concrete Reference concretes |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 13687-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Dry thermal cycling |
| BS EN 13733:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents |
| BS EN 13529:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
| BS EN 1504-4:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural bonding |
| BS EN 13295:2004 | Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 13057:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
| BS EN 15184:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test) |
| BS EN 1881:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method |
| BS EN 13579:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 13580:2002 | Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations |
| EN 15184:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
| EN 1504-4:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
| EN 13733:2002 | Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents |
| EN 1544:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars |
| EN 1881:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
| EN 13687-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
| EN 13579:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation |
| EN 14845-1:2007 | Test methods for fibres in concrete - Part 1: Reference concretes |
| EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
| EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
| EN 13687-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling |
| EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 13892-8:2002 | Methods of test for screed materials - Part 8: Determination of bond strength |
| EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| EN 14068:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete |
| EN 13581:2002 | Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
| BS EN 13892-8:2002 | Methods of test for screed materials Determination of bond strength |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| BS EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability |
| 03/314373 DC : DRAFT DEC 2003 | BS EN 14845-2 - TEST METHODS FOR FIBRES IN CONCRETE - PART 2 - EFFECT ON STRENGTH |
| 04/19991587 DC : DRAFT MAY 2004 | BS EN 1504-6 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 6: ANCHORING OF REINFORCING STEEL BAR |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| I.S. EN 13375:2004 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 13529:2003-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - RESISTANCE TO SEVERE CHEMICAL ATTACK |
| DIN EN 1504-4:2016-05 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
| DIN EN 13295:2004-08 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
| DIN EN 1062-7:2004-08 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| BS EN 13578:2003 | Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
| BS EN 1544:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars |
| BS EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Freeze-thaw cycling with de-icing salt immersion |
| BS EN 12618-1:2003 | Products and systems for the protection and repair of concrete structures. Test methods Adhesion and elongation capacity of injection products with limited ductility |
| BS EN 13580:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations |
| BS EN 13687-5:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Resistance to temperature shock |
| EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN 12618-2:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength |
| DIN EN 12618-1:2003-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PART 1: ADHESION AND ELONGATION CAPACITY OF INJECTION PRODUCTS WITH LIMITED DUCTILITY |
| DIN EN 14845-1:2007-09 | Test methods for fibres in concrete - Part 1: Reference concretes |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
| DIN EN 13892-8:2003-02 | METHODS OF TEST FOR SCREED MATERIALS - PART 8: DETERMINATION OF BOND STRENGTH |
| EN 13578:2003 | Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| DIN EN 15184:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
| DIN EN 12618-3:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| DIN EN 10080:2005-08 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| DIN EN 14068:2004-03 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of water tightness of injected cracks without movement in concrete |
| DIN EN 12618-2:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength |
| DIN EN 15183:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.