EN 1849-2:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
Superseded date
16-03-2022
Published date
09-12-2009
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling
5 Determination of thickness
6 Determination of mass per unit area
7 Test report
Annex A (informative) - Example of the cut cross-section
of a membrane
This European Standard specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof waterproofing.
| Committee |
CEN/TC 254
|
| DevelopmentNote |
To be read in conjunction with EN 13956. (06/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 1849-2:2010-04 | Identical |
| UNI EN 1849-2 : 2010 | Identical |
| NS EN 1849-2 : 2009 | Identical |
| BS EN 1849-2:2009 | Identical |
| I.S. EN 1849-2:2009 | Identical |
| NEN EN 1849-2 : 2009 | Identical |
| UNE-EN 1849-2:2010 | Identical |
| NBN EN 1849-2 : 2010 | Identical |
| NF EN 1849-2 : 2010 | Identical |
| SN EN 1849-2 : 2009 | Identical |
| PN EN 1849-2 : 2010 | Identical |
| ONORM EN 1849-2 : 2010 | Identical |
| PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| PREN 12311-2 : DRAFT 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 04/30111755 DC : 0 | EN 14909 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| 16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| 16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| PREN 13859-2 : DRAFT 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| 12/30267857 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 12/30267848 DC : 0 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 12/30259207 DC : DRAFT JUNE 2012 | BS EN 13984 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| PREN 13967 : DRAFT 2011 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| PD CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187 |
| BS EN 13493:2013 | Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites |
| UNE-EN 15382:2013 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| BS EN 15382:2013 | Geosynthetic barriers. Characteristics required for use in transportation infrastructure |
| EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
| S.R. CEN/TS 16459:2013 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| DIN EN 14909 E : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 13859-1:2014-07 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| BS EN 13492:2013 | Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| BS EN 13967 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| BS EN 13583:2012 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance |
| EN 12311-2:2013 | Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
| DIN EN 13492:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| DIN EN 15382:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| 12/30269002 DC : 0 | BS EN 495-5 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF FOLDABILITY AT LOW TEMPERATURE - PART 5: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| DIN EN 15382 E : 2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| PREN 12226 : DRAFT 2010 | GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
| 13/30273039 DC : 0 | BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| 12/30267851 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 12/30269011 DC : 0 | BS EN 12311-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| BS EN 16994:2018 | Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| BS EN 14151:2010 | Geosynthetics. Determination of burst strength |
| 14/30301266 DC : 0 | BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| PREN 13859-1 : DRAFT 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| I.S. EN 14151:2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| DIN EN 13361:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| DIN EN 13491:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| UNE-EN 13492:2013 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| DIN EN 13492:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| BS EN 16993:2018 | Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| PREN 13362 : DRAFT 2012 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 13361:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| EN 495-5:2013 | Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing |
| DIN EN 495-5:2013-08 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF FOLDABILITY AT LOW TEMPERATURE - PART 5: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| DIN EN 1548:2007-11 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen |
| DIN EN 13493:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| DIN EN 13361:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| BS EN 495-5:2013 | Flexible sheets for waterproofing. Determination of foldability at low temperature Plastic and rubber sheets for roof waterproofing |
| DIN EN 12311-2:2013-11 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| UNE-EN 14909:2013 | Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
| BS EN 13859-2:2014 | Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for walls |
| I.S. EN 13859-1:2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| I.S. EN 13984:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 13160-7:2016 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| I.S. EN 1847:2009 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - METHODS FOR EXPOSURE TO LIQUID CHEMICALS, INCLUDING WATER |
| DIN 16726:2011-01 | PLASTIC SHEETING - TESTING |
| I.S. EN 14909:2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 495-5:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF FOLDABILITY AT LOW TEMPERATURE - PART 5: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| I.S. EN 12311-2:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| DIN EN 1847:2010-04 | Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water |
| I.S. EN 13967:2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 13583:2012 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF HAIL RESISTANCE |
| I.S. EN 13859-2:2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| I.S. EN 13956:2012 | FLEXIBLE SHEET FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 13984 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| UNI EN 14151 : 2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| 05/30138879 DC : 0 | PREN 1548 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - METHOD FOR EXPOSURE TO BITUMEN |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 13/30273036 DC : 0 | BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| DIN EN 14151:2010-11 | Geosynthetics - Determination of burst strength |
| 09/30207865 DC : 0 | BS EN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| I.S. EN 13362:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| EN 13493:2018 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| DIN EN 13362:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| NF EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| PREN 17096 : DRAFT 2017 | GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS |
| UNE-EN 13160-7:2017 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| DIN EN 13956:2013-03 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| DIN EN 13984:2013-05 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| EN 13967:2012+A1:2017 | Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics |
| UNI EN 13859-2 : 2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| UNI EN 13956 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 495-5 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF FOLDABILITY AT LOW TEMPERATURE - PART 5: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| UNI EN 13859-1 : 2014 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
| UNI EN 12311-2 : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| UNI EN 14909 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 1847 : 2010 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTICS AND RUBBER SHEETS FOR ROOF WATERPROOFING - METHODS FOR EXPOSURE TO LIQUID CHEMICALS, INCLUDING WATER |
| UNI EN 1548 : 2008 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - METHOD FOR EXPOSURE TO BITUMEN |
| UNI EN 13967 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| UNI EN 13583 : 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF HAIL RESISTANCE |
| 16/30338108 DC : DRAFT JULY 2016 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| 12/30267854 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN CONSTRUCTION AND TUNNELS AND ASSOCIATED UNDER GROUND STRUCTURES |
| 12/30267845 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| UNI CEN/TS 16459 : 2014 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| 12/30268279 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 14909 : DRAFT 2004 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSE - DEFINITIONS AND CHARACTERISTICS |
| PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| UNE-EN 13491:2013 | Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures |
| I.S. EN 16993:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| I.S. EN 16994:2018 | CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| UNE-EN 13493:2013 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| UNE-EN 13361:2013 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| DIN EN 15382:2016-08 (Draft) | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| UNE-EN 13362:2013 | Geosynthetic barriers - Characteristics required for use in the construction of canals |
| EN 13362:2018 | Geosynthetic Barriers - Characteristics required for use in the construction of canals |
| EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| EN 13492:2018 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| EN 13361:2018 | Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams |
| I.S. EN 13493:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| DIN EN 13967:2012-07 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| BS EN 13984:2013 | Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics |
| BS EN 1847:2009 | Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water |
| DIN EN 12311-2 E : 2013 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF TENSILE PROPERTIES - PART 2: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| BS EN 13160-7:2003 | Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
| UNE-EN 13583:2013 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance |
| UNE-EN 495-5:2013 | Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing |
| CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 |
| BS EN 1931:2000 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties |
| DIN EN 14909:2012-07 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF COURSES - DEFINITIONS AND CHARACTERISTICS |
| UNE-EN 13984:2013 | Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
| UNE-EN 13956:2013 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| BS EN 1548:2007 | Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Method for exposure to bitumen |
| BS EN 13956:2012 | Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics |
| UNE-EN 12311-2:2013 | Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 1548:2007 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen |
| EN 13984:2013 | FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
| EN 13859-1:2014 | Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing |
| EN 14909:2012 | Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
| EN 13859-2:2014 | Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls |
| EN 14151:2010 | Geosynthetics - Determination of burst strength |
| EN 13583:2012 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance |
| EN 1847:2009 | Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN 16993:2018 | Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| EN 13956:2012 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| 16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| PREN 495-5 : DRAFT 2012 | FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF FOLDABILITY AT LOW TEMPERATURE - PART 5: PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING |
| 11/30248672 DC : 0 | BS EN 13967 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER DAMP PROOF SHEETS INCLUDING PLASTIC AND RUBBER BASEMENT TANKING SHEET - DEFINITIONS AND CHARACTERISTICS |
| EN 16994:2018 | Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| 16/30338105 DC : 0 | BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| 08/30172827 DC : DRAFT AUG 2008 | BS EN 14151 - GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| I.S. EN 13492:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| 10/30216645 DC : 0 | BS EN 12226 - GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
| 16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 09/30207868 DC : 0 | BS EN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| 16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| NF EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNE-EN 14151:2010 | Geosynthetics - Determination of burst strength |
| 17/30353406 DC : 0 | BS EN 17096 - GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS |
| BS EN 13362:2018 | Geosynthetic Barriers. Characteristics required for use in the construction of canals |
| DIN EN 13583:2012-10 | FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN, PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DETERMINATION OF HAIL RESISTANCE |
| DIN EN 13859-2:2014-07 | FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
| BS EN 12311-2:2013 | Flexible sheets for waterproofing. Determination of tensile properties Plastic and rubber sheets for roof waterproofing |
| BS EN 13859-1:2014 | Flexible sheets for waterproofing. Definitions and characteristics of underlays Underlays for discontinuous roofing |
| BS EN 14909:2012 | Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics |
| DIN EN 13362:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| DIN EN 13493:2013-11 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| UNE-EN 13967:2013 | Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics |
| EN 13416:2001 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.