• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 196-2:2013

Current
Current

The latest, up-to-date edition.

Method of testing cement - Part 2: Chemical analysis of cement
Published date

12-06-2013

Foreword
1 Scope
2 Normative references
3 General requirements for testing
4 Analysis by wet chemistry
5 Chemical analysis by X-ray fluorescence
Annex A (informative) - Examples of fluxes
Annex B (informative) - Sources of certified
        reference materials
Annex C (informative) - Examples of calibration
        standards and monitor beads and pellets
Bibliography

This European Standard specifies the methods for the chemical analysis of cement.This document describes the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used.An alternative performance-based method using X-ray fluorescence (XRF) is described for SiO2, Al2O3, Fe2O3, CaO, MgO, SO3, K2O, Na2O, TiO2, P2O5, Mn2O3, SrO, Cl and Br. When correctly calibrated according to the specified procedures and reference materials, it provides a method equivalent to the reference methods but has not been validated for use yet as a reference procedure for conformity and dispute purposes. It can be applied to other relevant elements when adequate calibrations have been established. This method is based on beads of fused sample and analytical validation using certified reference materials, together with performance criteria. A method based on pressed pellets of un-fused sample can be considered as equivalent, providing that the analytical performance satisfies the same criteria.Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.This document describes methods which apply principally to cements, but which can also be applied to their constituent materials. They can also be applied to other materials, the standards for which call up these methods. Standard specifications state which methods are to be used.

Committee
CEN/TC 51
DevelopmentNote
Supersedes EN 196-21. (04/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
NS EN 196-2 : 2013 Identical
SN EN 196-2 : 2013 Identical
NBN EN 196-2 : 2013 Identical
SN EN 196 : 1991 Identical
UNE-EN 196-2:2014 Identical
I.S. EN 196-2:2013 Identical
NEN EN 196-2 : 2013 Identical
UNI EN 196-2 : 2013 Identical
SANS 50196-2 : 3ED 2014 Identical
BS EN 196-2:2013 Identical
NF EN 196-2 : 2013 Identical
PN EN 196-2 : 2013 Identical
UNE 80215:1988 Identical
DIN EN 196-2:2013-10 Identical
SANS 50196-2:2014(R2023) Identical

DIN EN 15191 E : 2010 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCE
PD CR 14245:2001 Guidelines for the application of EN 197-2. Conformity Evaluation
CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
07/30166977 DC : DRAFT AUG 2007 BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
BS EN 19694-3:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Cement industry
I.S. EN 480-15:2013 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES
09/30205526 DC : 0 BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
DIN EN 13282-2:2015-07 HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
API 10A : 2011 SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING
08/30165493 DC : DRAFT FEB 2008 BS EN ISO 10426-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION
S.R. CEN/TR 16443:2013 BACKGROUNDS TO THE REVISION OF EN 450-1:2005+A1:2007 - FLY ASH FOR CONCRETE
DD ENV 197-2:1996 Cement Conformity evaluation
I.S. EN ISO 10426-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION (ISO 10426-1:2009)
UNE-EN 15191:2011 Precast concrete products - Classification of glassfibre reinforced concrete performance
PREN 13282-1 : DRAFT 2010 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 15743:2010 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 15368 : 2008 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 13282-3:2015 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
BS EN 206 : 2013 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
DIN EN 14227-4:2013-08 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
DIN EN 480-12:2005-12 Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
DIN EN 12715:2000-10 Execution of special geotechnical work - Grouting; English version of DIN EN 12715
DIN EN 14216 E : 2015 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS
BS EN 450-1:2012 Fly ash for concrete Definition, specifications and conformity criteria
UNE-EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
BS EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
BS EN 14227-4:2013 Hydraulically bound mixtures. Specifications Fly ash for hydraulically bound mixtures
BS EN 12715:2000 Execution of special geotechnical work. Grouting
BS EN 13043:2013 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
I.S. EN 13263-2:2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
I.S. EN 480-12:2005 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 12: DETERMINATION OF THE ALKALI CONTENT OF ADMIXTURES
EN 13263-2:2005+A1:2009 Silica fume for concrete - Part 2: Conformity evaluation
CEN/TR 196-4:2007 Methods of testing cement - Part 4: Quantitative determination of constituents
CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete
EN 12620:2002+A1:2008 Aggregates for concrete
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
ENV 197-2 : 1995 CEMENT - CONFORMITY EVALUATION
EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
ENV 13282:2000 Hydraulic road binders - Composition, specifications and conformity criteria
10/30200034 DC : 0 BS EN 13282-1 - HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
DIN EN 15191:2010-04 Precast concrete products - Classification of glassfibre reinforced concrete performance
03/303958 DC : DRAFT APR 2003 EN 14679 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
BS EN 15743 : 2010 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
NF EN 15368 : 2009 + A1 2010 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 480-15:2013 Admixtures for concrete, mortar and grout. Test methods Reference concrete and method for testing viscosity modifying admixtures
PREN 16236 : DRAFT 2015 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
BS EN 15191:2009 Precast concrete products. Classification of glassfibre reinforced concrete performance
DIN EN 15368 E : 2010 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
11/30240492 DC : 0 BS EN 14227-4 - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
UNE-EN 15368:2010 Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
13/30282202 DC : 0 BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
PREN 12620 : DRAFT 2015 AGGREGATES FOR CONCRETE
DIN EN 13282-1:2013-06 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
PREN 197-1 : DRAFT 2014 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
DIN EN 16622:2016-02 SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
S.R. CEN/TR 16912:2016 GUIDELINES FOR A PROCEDURE TO SUPPORT THE EUROPEAN STANDARDIZATION OF CEMENTS
I.S. EN 19694-3:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY
EN ISO 10426-1:2009/AC:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION - TECHNICAL CORRIGENDUM 2 (ISO 10426-1:2009/COR 2:2012)
DIN EN 13263-2:2009-07 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
DIN EN 480-13:2015-08 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 13: REFERENCE MASONRY MORTAR FOR TESTING MORTAR ADMIXTURES
DIN EN 14216:2015-09 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS
DIN EN 14679:2005-07 Execution of special geotechnical works - Deep mixing
I.S. EN 14216:2015 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS
I.S. EN 450-1:2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 480-13:2015 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 13: REFERENCE MASONRY MORTAR FOR TESTING MORTAR ADMIXTURES
I.S. EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
I.S. EN 197-1:2011 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
I.S. EN 480-1:2014 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING
EN 12715 : 2000 EXECUTION OF SPECIAL GEOTECHNICAL WORK - GROUTING
DIN EN 413-1:2011-07 Masonry cement - Part 1: Composition, specifications and conformity criteria
DIN EN 197-1:2011-11 Cement - Part 1: Composition, specifications and conformity criteria for common cements
I.S. EN 14227-4:2013 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
I.S. EN 934-4:2009 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
I.S. EN 13263-1:2005 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
I.S. EN 413-1:2011 MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
DIN EN 197-4:2004-08 CEMENT - PART 4: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW EARLY STRENGTH BLAST FURNACE CEMENTS
DIN EN 206-1:2001-07 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
I.S. EN 1744-1:2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
BS 3892-1:1993 Pulverized-fuel ash Specification for pulverized-fuel ash for use with Portland cement
BS 146:1991 Specification for Portland blastfurnace cement
BS 6699:1992 Specification for ground granulated blastfurnace slag for use with Portland cement
BS 4246:1991 Specification for high slag blastfurnace cement
BS 12:1991 Specification for Portland cement
08/30180275 DC : 0 BS EN 934-4 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
DD ENV 197-1:1995 Cement Composition, specifications and conformity criteria. Common cements
I.S. EN 15368:2008 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
15/30311103 DC : 0 BS EN 13242 - AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION
PREN 934-4 : DRAFT 2008 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
DIN EN 13282-2 E : 2015 HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 206-1:2002 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX)
UNE-EN 15743:2010 Supersulfated cement - Composition, specifications and conformity criteria
PD CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete
DIN EN 480-15:2013-06 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
DIN EN 15743:2015-06 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
02/104525 DC : DRAFT JULY 2002 EN 13263-1 - SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
07/30165909 DC : 0 BS ISO 29581-2 - METHODS OF TESTING CEMENT - CHEMICAL ANALYSIS OF CEMENT - PART 2: ANALYSIS BY X-RAY FLUORESCENCE
PD CEN/TR 196-4:2007 Methods of testing cement Quantitative determination of constituents
DIN EN 206:2014-07 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
API 10A REDLINE : 2010 SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING
02/100390 DC : DRAFT JAN 2002 PREN 450-2 - FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION
ISO 10426-1:2009 Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification
API 10A CHINESE : 2002 SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING
NF EN 15191 : 2010 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCES
UNE-EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
UNE-EN 13282-3:2015 Hydraulic road binders - Part 3: Conformity evaluation
PREN 15191 : DRAFT 2009 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASS-FIBRE REINFORCED CONCRETE PERFORMANCES
S.R. CR 14245:2001 GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION'
DIN EN 13263-1:2009-07 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
DIN EN 1744-1:2013-03 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
DIN EN 934-4:2009-09 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
DIN EN 934-1:2008-04 Admixtures for concrete, mortar and grout - Part 1: Common requirements
DIN EN 480-1:2015-01 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
DIN EN 14647:2006-01 Calcium aluminate cement - Composition, specifications and conformity criteria
BS EN 14647:2005 Calcium aluminate cement. Composition, specifications and conformity criteria
BS EN 13263-2 : 2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
UNE-EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
BS EN 197-1:2011 Cement Composition, specifications and conformity criteria for common cements
UNE-EN 480-1:2015 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
UNI EN 1744-1 : 2013 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
UNI EN 413-1 : 2011 MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 13242 : 2013 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION
UNI EN 13263-1 : 2009 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
UNI EN 14647 : 2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 197-1 : 2011 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
UNI EN 480-1 : 2014 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING
UNI EN 14227-4 : 2013 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTUREE
UNI EN 14679 : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
UNI EN 934-4 : 2009 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
UNI EN 13263-2 : 2009 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
UNI EN 15167-1 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 1504-5 : 2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
I.S. EN 13043:2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 13043 : 2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 450-1 : 2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 934-1 : 2008 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 1: COMMON REQUIREMENTS
UNI EN ISO 10426-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION
UNI EN 12620 : 2013 AGGREGATES FOR CONCRETE
DIN EN 13282-3:2015-06 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity
UNI EN 480-15 : 2013 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES
01/104967 DC : DRAFT JUN 2001 PREN 197-3 - CEMENT - PART 3: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW HEAT COMMON CEMENTS
UNE-EN 16622:2016 Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
11/30251426 DC : DRAFT OCT 2011 BS EN 480-15 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES
DIN EN 15368:2010-11 Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria (includes Amendment A1:2010)
PREN 14227-4 : DRAFT 2011 SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
14/30300225 DC : DRAFT JUNE 2014 BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
12/30257889 DC : 0 BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
07/30170690 DC : 0 BS ISO 29581-2 - METHODS OF TESTING CEMENT - CHEMICAL ANALYSIS OF CEMENT - PART 2: ANALYSIS BY X-RAY FLUORESCENCE
DIN EN 15743 E : 2015 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
DIN EN 16622 E : 2016 SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
PD 6534:1993 Guide to the use in the UK of DD ENV 206:1992. Concrete. Performance, production, placing and compliance criteria
BS EN 16622:2015 Silica-calcium fume for concrete. Definitions, requirements and conformity criteria
BS 7583:1992 Specification for Portland limestone cement
DIN EN 13282-1 E : 2013 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
PREN 13043 : DRAFT 2015 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
DD ENV 13282:2000 Hydraulic road binders. Composition, specifications and conformity criteria
I.S. EN 16622:2015 SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
BS EN ISO 10426-1:2009 Petroleum and natural gas industries. Cements and materials for well cementing Specification
I.S. EN 13282-2:2015 HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
15/30311106 DC : 0 BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
PREN 13242 : DRAFT 2015 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION
UNE-EN 13282-1:2013 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
ISO/TR 12389:2009 Methods of testing cement Report of a test programme Chemical analysis by x-ray fluorescence
I.S. EN 15191:2009 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCE
S.R. CEN TR 196-4:2007 METHODS OF TESTING CEMENT - PART 4: QUANTITATIVE DETERMINATION OF CONSTITUENTS
DIN EN 14679 E : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
DIN EN 14647 E : 2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 13263-1 : 2005 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
BS EN 1744-1 : 2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
BS EN 12620:2013 Aggregates for concrete
BS EN 450:1995 Fly ash for concrete. Definitions, requirements and quality control
BS EN 206-1:2000 Concrete Specification, performance, production and conformity
BS EN 480-1:2014 Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing
UNE-EN 14216:2015 Cement - Composition, specifications and conformity criteria for very low heat special cements
UNE-EN 934-4:2010 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
BS EN 934-1:2008 Admixtures for concrete, mortar and grout Common requirements
UNE-EN 1744-1:2010 Tests for chemical properties of aggregates - Part 1: Chemical analysis
BS EN 14679:2005 Execution of special geotechnical works. Deep mixing
BS EN 1008:2002 Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BS EN 934-4:2009 Admixtures for concrete, mortar and grout Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling
BS EN 1504-5:2013 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection
UNE-EN 14227-4:2014 Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
UNE-EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
BS EN 14216:2015 Cement. Composition, specifications and conformity criteria for very low heat special cements
UNE-EN 450-1:2013 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 14679:2005/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
EN 450 : 1994 FLY ASH FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND QUALITY CONTROL
EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 19694-3 : 2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY
EN 16622:2015 Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
ENV 197-1 : 1992 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA - COMMON CEMENTS
EN 14216:2015 Cement - Composition, specifications and conformity criteria for very low heat special cements
EN 15743:2010+A1:2015 Supersulfated cement - Composition, specifications and conformity criteria
EN 14647:2005/AC:2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 14227-4:2013 Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
EN 197-4:2004 Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 480-12:2005 Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
EN 15191:2009 Precast concrete products - Classification of glassfibre reinforced concrete performance
EN 934-1:2008 Admixtures for concrete, mortar and grout - Part 1: Common requirements
EN 480-1:2014 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
BS EN 13282-3:2013 Hydraulic road binders Conformity evaluation
I.S. EN 934-1:2008 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 1: COMMON REQUIREMENTS
10/30200038 DC : 0 BS EN 13282-2 - HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
PD ISO/TR 12389:2009 Methods of testing cement. Report of a test programme. Chemical analysis by x-ray fluorescence
PD CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
I.S. EN 197-4:2004 CEMENT - PART 4: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW EARLY STRENGTH BLASTFURNACE CEMENTS
01/103361 DC : DRAFT APR 2001 PREN 413-1 - MASONRY CEMENT - PART 1: SPECIFICATION
09/30200445 DC : 0 BS EN 15191 - PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASS-FIBRE REINFORCED CONCRETE PERFORMANCES
05/30129415 DC : DRAFT FEB 2005 BS EN 480-1 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING
BS EN 13282-1:2013 Hydraulic road binders Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
BS EN 13282-2:2015 Hydraulic road binders Normal hardening hydraulic road binders. Composition, specifications and conformity criteria
03/303925 DC : DRAFT MAR 2003 BS EN 14647 - CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
05/30130592 DC : DRAFT MAR 2005 BS EN 15167-1 - GROUND GRANULATED BLASTFURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 13282-1 : 2013 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 13282-1:2013 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNE-EN 13282-2:2016 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
UNI EN 15368 : 2010 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 15191 : 2010 PRECAST CONCRETE PRODUCTS - CLASSIFICATION OF GLASSFIBRE REINFORCED CONCRETE PERFORMANCE
DIN EN 1504-5:2013-06 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
BS EN 480-13:2015 Admixtures for concrete, mortar and grout. Test methods Reference masonry mortar for testing mortar admixtures
BS EN 480-12:2005 Admixtures for concrete, mortar and grout. Test methods Determination of the alkali content of admixtures
BS EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria
BS EN 413-1:2011 Masonry cement Composition, specifications and conformity criteria
BS EN 197-4:2004 Cement Composition, specifications and conformity criteria for low early strength blastfurnace cements
CR 14245:2001 Guidelines for the application of EN 197-2 "Conformity Evaluation"
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13282-2:2015 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13282-1:2013 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13282-3:2015 Hydraulic road binders - Part 3: Conformity evaluation
DIN EN 450-1:2012-10 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
EN 196-7:2007 Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
ISO 385:2005 Laboratory glassware Burettes
ISO 835:2007 Laboratory glassware — Graduated pipettes
ISO/TR 12389:2009 Methods of testing cement Report of a test programme Chemical analysis by x-ray fluorescence
ISO Guide 30:2015 Reference materials Selected terms and definitions
ISO Guide 31:2015 Reference materials — Contents of certificates, labels and accompanying documentation

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.