• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 196-3:2016

Current
Current

The latest, up-to-date edition.

Methods of testing cement - Part 3: Determination of setting times and soundness
Published date

23-11-2016

European foreword
1 Scope
2 Normative references
3 Principles
4 Laboratory, equipment and materials
5 Standard consistence test
6 Setting time test
7 Soundness test
Annex A (informative) Alternative method for
         setting time tests

This European Standard specifies the methods for determining standard consistence, setting times and soundness of cements.The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification.This part of EN 196 describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used.

Committee
CEN/TC 51
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

DIN EN 13282-3:2015-06 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
I.S. EN 15368:2008 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
07/30166977 DC : DRAFT AUG 2007 BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
12/30256100 DC : 0 BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
09/30205526 DC : 0 BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
11/30251994 DC : 0 BS EN 13963 - JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13963 : DRAFT 2011 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13454-2 : DRAFT 2017 BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS
DIN EN 13282-2:2015-07 HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
03/319412 DC : DRAFT NOV 2003 EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
DD ENV 197-2:1996 Cement Conformity evaluation
ISO 12439:2010 Mixing water for concrete
PREN 13282-1 : DRAFT 2010 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 15743:2010 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 15368 : 2008 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 13282-3:2015 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
17/30357424 DC : 0 BS EN 13454-2 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS
DIN EN 12715:2000-10 Execution of special geotechnical work - Grouting; English version of DIN EN 12715
DIN EN 14216 E : 2015 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS
BS EN 450-1:2012 Fly ash for concrete Definition, specifications and conformity criteria
BS EN 1744-6:2006 Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement
UNE-EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
BS EN 12715:2000 Execution of special geotechnical work. Grouting
BS EN 14227-4:2013 Hydraulically bound mixtures. Specifications Fly ash for hydraulically bound mixtures
BS EN 480-2:2006 Admixtures for concrete, mortar and grout. Test methods Determination of setting time
I.S. EN 413-2:2016 MASONRY CEMENT - PART 2: TEST METHODS
I.S. EN 459-2:2010 BUILDING LIME - PART 2: TEST METHODS
ENV 197-2 : 1995 CEMENT - CONFORMITY EVALUATION
EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
ENV 13282:2000 Hydraulic road binders - Composition, specifications and conformity criteria
10/30200034 DC : 0 BS EN 13282-1 - HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
ONORM EN 13454-2 : 2007 BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS
03/303958 DC : DRAFT APR 2003 EN 14679 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
BS EN 15743 : 2010 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
NF EN 15368 : 2009 + A1 2010 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
01/107932 DC : DRAFT NOV 2001 BS EN 1504-5 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
04/30088151 DC : DRAFT FEB 2004 EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
DIN EN 15368 E : 2010 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
00/107013 DC : DRAFT OCT 2000 PREN 13963 - JOINTING MATERIALS FOR GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
11/30240492 DC : 0 BS EN 14227-4 - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
UNE-EN 15368:2010 Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
DIN EN 13282-1:2013-06 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
PREN 197-1 : DRAFT 2014 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
I.S. EN 13454-2:2004 BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS
S.R. CEN/TR 16912:2016 GUIDELINES FOR A PROCEDURE TO SUPPORT THE EUROPEAN STANDARDIZATION OF CEMENTS
DIN EN 14227-4:2013-08 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
DIN EN 14216:2015-09 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS
DIN EN 14679:2005-07 Execution of special geotechnical works - Deep mixing
BS EN 447:2007 Grout for prestressing tendons. Basic requirements
I.S. EN 13963:2014 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14216:2015 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR VERY LOW HEAT SPECIAL CEMENTS
I.S. EN 450-1:2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 480-2:2007 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 2: DETERMINATION OF SETTING TIME
I.S. EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
I.S. EN 197-1:2011 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
EN 12715 : 2000 EXECUTION OF SPECIAL GEOTECHNICAL WORK - GROUTING
DIN EN 12878:1999-09 PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
DIN EN 413-1:2011-07 Masonry cement - Part 1: Composition, specifications and conformity criteria
DIN EN 197-1:2011-11 Cement - Part 1: Composition, specifications and conformity criteria for common cements
I.S. EN 14227-4:2013 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
I.S. EN 447:2007 GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS
DIN EN 14016-2:2004-04 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods; German version EN 14016-2:2004
I.S. EN 12878:2014 PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
I.S. EN 413-1:2011 MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
DIN EN 197-4:2004-08 CEMENT - PART 4: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW EARLY STRENGTH BLAST FURNACE CEMENTS
UNI EN 12878 : 2014 PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
BS 3892-1:1993 Pulverized-fuel ash Specification for pulverized-fuel ash for use with Portland cement
BS 146:1991 Specification for Portland blastfurnace cement
BS 6699:1992 Specification for ground granulated blastfurnace slag for use with Portland cement
BS 4246:1991 Specification for high slag blastfurnace cement
BS 12:1991 Specification for Portland cement
DD ENV 197-1:1995 Cement Composition, specifications and conformity criteria. Common cements
DIN EN 13282-2 E : 2015 HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNE-EN 15743:2010 Supersulfated cement - Composition, specifications and conformity criteria
DIN EN 15743:2015-06 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
14/30300225 DC : DRAFT JUNE 2014 BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
05/30129418 DC : DRAFT FEB 2005 BS EN 480-2 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 2: DETERMINATION OF SETTING TIME
02/100390 DC : DRAFT JAN 2002 PREN 450-2 - FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION
UNE-EN 13282-3:2015 Hydraulic road binders - Part 3: Conformity evaluation
S.R. CR 14245:2001 GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION'
DIN EN 12878:2014-07 PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
DIN EN 934-5:2008-02 Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
DIN EN 1744-6:2006-12 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
DIN EN 1771:2004-11 Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test
DIN EN 13963:2014-09 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14647:2006-01 Calcium aluminate cement - Composition, specifications and conformity criteria
BS EN 413-2:2016 Masonry cement Test methods
BS EN 459-2:2010 Building lime Test methods
BS EN 14647:2005 Calcium aluminate cement. Composition, specifications and conformity criteria
UNE-EN 459-2:2011 Building lime - Part 2: Test methods
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
EN 13454-2:2003+A1:2007 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
UNI EN 413-1 : 2011 MASONRY CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 14647 : 2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
EN 413-2:2016 Masonry cement - Part 2: Test methods
UNI EN 197-1 : 2011 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
UNI EN 934-5 : 2008 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
UNI EN 14227-4 : 2013 HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTUREE
UNI EN 14679 : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
UNI EN 15167-1 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 1504-5 : 2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
UNI EN 1744-6 : 2007 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
UNI EN 450-1 : 2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 447 : 2007 GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS
UNI EN 13963 : 2014 JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1771 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF INJECTABILITY AND SPLITTING TEST
PREN 12878 : DRAFT 2012 PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
01/104967 DC : DRAFT JUN 2001 PREN 197-3 - CEMENT - PART 3: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW HEAT COMMON CEMENTS
DIN EN 15368:2010-11 Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria (includes Amendment A1:2010)
PREN 14227-4 : DRAFT 2011 SPECIFICATIONS - PART 4: FLY ASH FOR HYDRAULICALLY BOUND MIXTURES
03/312990 DC : DRAFT SEP 2003 BS EN 413-2 - MASONRY CEMENT - PART 2: TEST METHODS
DIN EN 15743 E : 2015 SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
PD 6534:1993 Guide to the use in the UK of DD ENV 206:1992. Concrete. Performance, production, placing and compliance criteria
03/310129 DC : DRAFT JULY 2003 EN 934-5 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY
BS 7583:1992 Specification for Portland limestone cement
DIN EN 13282-1 E : 2013 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 13454-2:2003 Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate Test methods
DD ENV 13282:2000 Hydraulic road binders. Composition, specifications and conformity criteria
DIN EN 13454-2:2007-11 BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS
I.S. EN 13282-2:2015 HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNE-EN 13282-1:2013 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
UNI EN 459-2 : 2010 BUILDING LIME - PART 2: TEST METHODS
DIN EN 459-2:2010-12 Building lime - Part 2: Test methods
DIN EN 14679 E : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
DIN EN 14647 E : 2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 934-5:2007 Admixtures for concrete, mortar and grout Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling
BS EN 450:1995 Fly ash for concrete. Definitions, requirements and quality control
BS EN 13963:2014 Jointing materials for gypsum boards. Definitions, requirements and test methods
UNE-EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods
BS EN 12878:2014 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
UNE-EN 14216:2015 Cement - Composition, specifications and conformity criteria for very low heat special cements
BS EN 14679:2005 Execution of special geotechnical works. Deep mixing
BS EN 1008:2002 Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BS EN 1504-5:2013 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection
UNE-EN 14227-4:2014 Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
BS EN 1771:2004 Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test
UNE-EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
BS EN 14216:2015 Cement. Composition, specifications and conformity criteria for very low heat special cements
UNE-EN 450-1:2013 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
BS EN 197-1:2011 Cement Composition, specifications and conformity criteria for common cements
DIN EN 447:2017-09 Grout for prestressing tendons - Basic requirements
EN 14679:2005/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
EN 450 : 1994 FLY ASH FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND QUALITY CONTROL
EN 413-1:2011 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 1771:2004/AC:2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF INJECTABILITY AND SPLITTING TEST
EN 14016-2 : 2004 BINDERS FOR MAGNESITE SCREEDS - CAUSTIC MAGNESIA AND MAGNESIUM CHLORIDE - PART 2: TEST METHODS
EN 13963:2014 Jointing materials for gypsum boards - Definitions, requirements and test methods
ENV 197-1 : 1992 CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA - COMMON CEMENTS
EN 14216:2015 Cement - Composition, specifications and conformity criteria for very low heat special cements
EN 15743:2010+A1:2015 Supersulfated cement - Composition, specifications and conformity criteria
EN 12878:2014 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 14647:2005/AC:2006 CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
EN 447:2007 Grout for prestressing tendons - Basic requirements
EN 14227-4:2013 Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures
EN 197-4:2004 Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 934-5:2007 Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
BS EN 13282-3:2013 Hydraulic road binders Conformity evaluation
05/30139297 DC : DRAFT SEP 2005 EN 447 - GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS
10/30200038 DC : 0 BS EN 13282-2 - HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
PD CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
I.S. EN 197-4:2004 CEMENT - PART 4: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW EARLY STRENGTH BLASTFURNACE CEMENTS
01/103361 DC : DRAFT APR 2001 PREN 413-1 - MASONRY CEMENT - PART 1: SPECIFICATION
09/30195262 DC : 0 BS ISO 12439 - MIXING WATER FOR CONCRETE
98/109830 DC : DRAFT NOV 1998 PREN 934-5 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
BS EN 13282-1:2013 Hydraulic road binders Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
BS EN 13282-2:2015 Hydraulic road binders Normal hardening hydraulic road binders. Composition, specifications and conformity criteria
03/303925 DC : DRAFT MAR 2003 BS EN 14647 - CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
05/30130592 DC : DRAFT MAR 2005 BS EN 15167-1 - GROUND GRANULATED BLASTFURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 13282-1 : 2013 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
EN 459-2:2010 Building lime - Part 2: Test methods
I.S. EN 13282-1:2013 HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNE-EN 13282-2:2016 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
UNI EN 15368 : 2010 HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
DIN EN 1504-5:2013-06 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
BS EN 14016-2:2004 Binders for magnesite screeds. Caustic magnesia and magnesium chloride Test methods
BS EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria
BS EN 13409:2002 Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time
BS EN 413-1:2011 Masonry cement Composition, specifications and conformity criteria
BS EN 197-4:2004 Cement Composition, specifications and conformity criteria for low early strength blastfurnace cements
CR 14245:2001 Guidelines for the application of EN 197-2 "Conformity Evaluation"
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
DIN EN 480-2:2006-11 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
EN 13282-2:2015 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13282-1:2013 Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
EN 13282-3:2015 Hydraulic road binders - Part 3: Conformity evaluation
DIN EN 450-1:2012-10 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

EN 196-1:2016 Methods of testing cement - Part 1: Determination of strength

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.