EN 2591-100:2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
Superseded date
21-08-2019
Published date
26-10-2005
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Standard test conditions
5 Others
5.1 Fibre end preparation
5.2 Termination cleaning
5.3 Light Launch System (LLS)
5.4 Light Detection System (LDS)
6 List of test methods
7 Test report
This standard specifies the general requirements for the methods of testing elements of electrical, optical and data transmission system connections used in aerospace applications.
| Committee |
ASD-STAN
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DS EN 2591-100 : 2005 | Identical |
| DS EN 2591-100 : 2018 | Identical |
| ÖNORM EN 2591-100: 2018 10 01 | Identical |
| NBN EN 2591-100 : 2006 | Identical |
| I.S. EN 2591-100:2005 | Identical |
| I.S. EN 2591-100:2018 | Identical |
| DIN EN 2591-100:2006-08 | Identical |
| NEN EN 2591-100 : 2007 | Identical |
| BS EN 2591-100:2018 | Identical |
| NS EN 2591-100 : 1ED 2006 | Identical |
| BS EN 2591-100:2005 | Identical |
| DIN EN 2591-100:2018-10 | Identical |
| NF EN 2591-100 : 2006 | Identical |
| UNE-EN 2591-100:2005 | Identical |
| PN EN 2591-100 : 2007 | Identical |
| SN EN 2591-100 : 2005 | Identical |
| NEN-EN 2591-100:2018 en | Identical |
| UNI EN 2591-100 : 2018 | Identical |
| UNI EN 2591-100 : 2007 | Identical |
| ONORM EN 2591-100 : 2006 | Identical |
| I.S. EN 3660-026:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 026: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| BS EN 3745-506:2009 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Impact resistance |
| 00/717214 DC : DRAFT NOV 2000 | PREN 3155-054 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 054: CONTACTS, ELECTRICAL MALE, THERMOCOUPLE, NIAL TYPE C, CRIMP, CLASS T - PRODUCT STANDARD |
| PREN 3660-063 : DRAFT 2014 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 063: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| NF EN 3733-106 : 2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 106: RECEPTACLE CONNECTOR DUMMY JAM NUT - PRODUCT STANDARD |
| 13/30280086 DC : 0 | BS EN 2591-318 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 318: FIRE-RESISTANCE |
| UNI EN 3745-405 : 2012 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: LOW/HIGH TEMPERATURE BEND TEST |
| PREN 3660-064 : DRAFT 2014 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 064: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 2997 - PRODUCT STANDARD |
| BS EN 3660-011:2010 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, 90°, shielded, sealed, for heat shrinkable boot. Product standard |
| 14/30300791 DC : 0 | BS EN 3660-032 - AEROSPACE SERIES- CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 032: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| BS EN 2591-227:2015 | Aerospace series. Elements of electrical and optical connection. Test methods Partial discharges test |
| 10/30234009 DC : 0 | BS EN 2591-214 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 214: LIGHTNING STRIKE, CURRENT AND VOLTAGE PULSE |
| I.S. EN 3733-101:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREE C CONTINUOUS - PART 101: PROTECTIVE COVER RECEPTACLE - PRODUCT STANDARD |
| BS EN 4626-202:2009 | Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts Optical contact assembly for 900 μm buffered fibre receptacle. Product standard |
| NF EN 3745-603 : 2008 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 603: NUCLEAR RADIATION |
| NF EN 3660-006 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 006: CABLE OUTLET, SELF-LOCKING, STYLE C, STRAIGHT, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| NF EN 3155-064 : 2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 064: CONTACTS, ELECTRICAL, COAXIAL, 50 OHMS, SIZE 1, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| 02/706952 DC : DRAFT MAY 2002 | PREN 4530-001 - AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| 17/30360892 DC : 0 | BS EN 3660-065 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 065: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING - PRODUCT STANDARD |
| BS EN 3660-008:2010 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, self-locking, style C, 45°, shielded (cone grounding), unsealed with clamp strain relief. Product standard |
| NF EN 3660-007 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 007: CABLE OUTLET, SELF-LOCKING, STYLE C, 90 DEGREES, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| 15/30333207 DC : 0 | BS EN 3660-017 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| BS EN 4008-004:2017 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Die for crimping tool M22520/5-01. Product standard |
| BS EN 3155-075:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, quadrax, size 08, female, type E, crimp, class R. Product standard |
| I.S. EN 3733-004:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, CONNECTOR, FOUR HOLE FIXING CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
| 11/30245754 DC : 0 | BS EN 3660-063 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 063: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| BS EN 4008-003:2017 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| BS EN 4008-012:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| 10/30217640 DC : 0 | BS EN 4701-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531 CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| 17/30363748 DC : DRAFT JUL 2017 | BS EN 3660-033 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 033: STAINLESS STEEL BANDING BAND, STYLE Z, FOR ATTACHMENT OF INDIVIDUAL AND/OR OVERALL SCREENS TO CABLE OUTLETS - PRODUCT STANDARD |
| NF EN 3660-017 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| 09/30210064 DC : DRAFT SEP 2009 | BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| NF EN 3733-105 : 2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 105: RECEPTACLE CONNECTOR DUMMY TWO HOLES FIXING - PRODUCT STANDARD |
| BS EN 3745-514:2009 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cable twist bend |
| PREN 4008-001 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - TECHNICAL SPECIFICATION |
| PREN 3660-021 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 021: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, SELF-LOCKING WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| PREN 3660-020 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 020: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, SELF-LOCKING WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 3660-008:2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 008: CABLE OUTLET, SELF-LOCKING, STYLE C, 45 DEGREE, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 3660-010:2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 010: CABLE OUTLET, STYLE K, STRAIGHT, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| PREN 3660-034 : DRAFT 2015 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 034: MEMORY METAL RINGS FOR THE ATTACHMENT OF SCREENS - PRODUCT STANDARD |
| PREN 3660-031 : DRAFT 2015 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 031: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 3645 - PRODUCT STANDARD |
| PREN 4645-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| PREN 3660-025 : 200P2 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 025: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| PREN 3545-007 : 200P4 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 007: CABLE CLAMP - PRODUCT STANDARD |
| NF EN 3660-020 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 020: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, SELF-LOCKING WITH CLAMP STRAIN RELIEF FOR EN 3645 - PRODUCT STANDARD |
| TR 4643 : 2009 | AEROSPACE SERIES - EPOXY FOR FIBRE OPTIC CONNECTORS TO EN 3733 - OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS |
| PREN 2591-403 : 200P2 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION |
| PREN 3745-405 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: LOW/HIGH TEMPERATURE BEND TEST |
| PREN 2591-402 : 200P2 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 402: SHOCK |
| PREN 3745-301 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION |
| PREN 4008-018 : DRAFT 2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOL AND ASSOCIATED ACCESSORIES - PART 018: POSITIONER FOR CRIMPING TOOL M222520/2-01 - PRODUCT STANDARD |
| PREN 3745-504 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 504: MICRO BENDING TEST |
| PREN 3660-010 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 010: CABLE OUTLET, STYLE K, STRAIGHT, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| PREN 3745-515 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: BUFFER INSERTION FORCE |
| PREN 3745-202 : 200P4 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 202: FIBRE DIMENSIONS |
| PREN 3660-035 : DRAFT 2015 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 035: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 3645 - PRODUCT STANDARD |
| PREN 3745-306 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 306: VARIATION OF ATTENUATION DURING TEMPERATURE CYCLING |
| PREN 2591-315 : DRAFT 2014 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 315: RESISTANCE TO FLUIDS |
| PREN 4008-003 : DRAFT 2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 003: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| PREN 3745-517 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE TIE CLAMPING TEST |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| PREN 3745-512 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 512: FLEXURE ENDURANCE |
| PREN 3155-074 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 074: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, MALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| PREN 3545-001 : 200P4 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| PREN 2591-228 : DRAFT 2017 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION TEST METHODS - PART 228: FERRULE WITHDRAWAL FORCE |
| I.S. EN 3660-020:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 020: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, SELF-LOCKING WITH CLAMP STRAIN RELIEF FOR EN 3645 - PRODUCT STANDARD |
| I.S. EN 3745-517:2017 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE TIE CLAMPING TEST |
| I.S. EN 4008-018:2014 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOL AND ASSOCIATED ACCESSORIES - PART 018: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| I.S. EN 3733-001:2009 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3155-032:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 032: CONTACTS, ELECTRICAL, COAXIAL, 50 OHMS, SIZE 5, MALE, TYPE D, CRIMP, CLASS R - PRODUCT STANDARD |
| BS EN 3660-004:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard |
| EN 3660-005:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard |
| NF EN 3660-010 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 010: CABLE OUTLET, STYLE K, STRAIGHT, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| UNI EN 3660-025 : 2013 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 025: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| I.S. EN 3155-063:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 063: CONTACTS, ELECTRICAL, COAXIAL, 50 OHMS, SIZE 1, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| I.S. EN 3660-011:2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 011: CABLE OUTLET, STYLE K, 90 DEGREES, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| I.S. EN 3155-033:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 033: CONTACTS, ELECTRICAL, COAXIAL, 50 OHMS, SIZE 5, FEMALE, TYPE D, CRIMP, CLASS R - PRODUCT STANDARD |
| I.S. EN 3155-074:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 074: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, MALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| I.S. EN 3660-007:2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 007: CABLE OUTLET, SELF-LOCKING, STYLE C, 90 DEGREE, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 3745-404:2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK |
| NF EN 3745-404 : 2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK |
| BS EN 4008-005:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| BS EN 4530-001:2006 | Aerospace series. Sealing sleeves used in elements of connection Technical specification |
| BS EN 2591-6402:2001 | Elements of electrical and optical connection. Test methods Optical elements. Shock |
| BS EN 2591-615:2001 | Elements of electrical and optical connection. Test methods Optical elements. Connection integrity at temperature |
| BS EN 2591-6305:2001 | Elements of electrical and optical connection. Test methods Optical elements. Rapid change of temperature |
| BS EN 2591-604:2001 | Elements of electrical and optical connection. Test methods Optical elements. Cleaning capability of optical face |
| BS EN 2591-226:2007 | Aerospace series. Elements of electrical and optical connection. Test methods Corona level |
| BS EN 2591-423:2006 | Aerospace series. Elements of electrical and optical connection. Test methods Connector rear accessories thread strength |
| BS EN 2591-425:2001 | Elements of electrical and optical connection. Test methods Unwrapping capability, solderless wrapped connections |
| BS EN 3745-404:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Thermal shock |
| BS EN 2591-6403:2001 | Elements of electrical and optical connection. Test methods Optical elements. Vibrations |
| BS EN 4529-003:2006 | Aerospace series. Elements of electrical and optical connection. Sealing plugs Class T. Product standard |
| BS EN 2591-6323:2002 | Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Thermal shock (Hermetically sealed devices) |
| BS EN 2591-6415:2002 | Elements of electrical and optical connection. Test methods Optical elements. Test probe damage |
| BS EN 2591-219:2002 | Elements of electrical and optical connection. Test methods Voltage strength for insulated terminal lugs and in-line splices |
| BS EN 3218-010:2006 | Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Protective covers for EN 3218-006 and EN 3218-008 connectors. Product standard |
| BS EN 2591-613:2002 | Elements of electrical and optical connection. Test methods Optical elements. Impact test |
| BS EN 2591-707:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Measurement of characteristic impedance of a bus or a stub terminator |
| BS EN 2591-605:2002 | Elements of electrical and optical connection. Test methods Optical elements. Return loss |
| BS EN 3545-002:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Specification of performance and contact arrangements |
| BS EN 3372-001:2007 | Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous Technical specification |
| BS EN 2591-6101:2001 | Elements of electrical and optical connection. Test methods Optical elements. Visual examination |
| BS EN 2591-606:2002 | Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Crosstalk |
| BS EN 3745-410:2015 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Thermal life |
| BS EN 4529-001:2006 | Aerospace series. Elements of electrical and optical connection. Sealing plugs Technical specification |
| BS EN 2591-225:2007 | Aerospace series. Elements of electrical and optical connection. Test methods RF high potential withstanding voltage |
| BS EN 3545-001:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Technical specification |
| BS EN 3745-406:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cold bend test |
| BS EN 3218-009:2006 | Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Protective covers for EN 3218-005 and EN 3218-007 connectors. Product standard |
| BS EN 2591-6404:2002 | Elements of electrical and optical connection. Test methods Optical elements. Transverse load |
| BS EN 3745-512:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Flexure endurance |
| BS EN 2591-708:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Measurement of surface transfer impedance of couplers |
| BS EN 2591-6315:2001 | Elements of electrical and optical connection. Test methods Optical elements. Fluid resistance |
| BS EN 3545-008:2006 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Tools for assembly/removal of coding and attachment systems. Product standard |
| BS EN 2591-402:2012 | Aerospace series. Elements of electrical and optical connection. Test methods Shock |
| BS EN 2591-426:2001 | Elements of electrical and optical connection. Test methods Contact retention system effectiveness |
| BS EN 2591-218:2002 | Elements of electrical and optical connection. Test methods Ageing of terminal lugs and in-line splices by temperature and current cycling |
| I.S. EN 2591-307:2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST |
| PREN 3646-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3218-011:2006 | AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 011: TOOL, INSERT EXTRACTION FOR EN 3218-005 TO EN 3218-008 CONNECTORS - PRODUCT STANDARD |
| 00/717208 DC : DRAFT DEC 2000 | PREN 4529-001 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - SEALING PLUGS - PART 001: TECHNICAL SPECIFICATION |
| NF EN 3660-016 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 016: GROMMET NUT, STYLE A, SELF-LOCKING AND NON SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| I.S. EN 3733-003:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 003: PLUG CONNECTOR FOR CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
| 12/30275775 DC : 0 | BS EN 3660-063 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 063: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| NF EN 3660-021 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 021: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, SELF-LOCKING WITH CLAMP STRAIN RELIEF FOR EN 3645 - PRODUCT STANDARD |
| NF EN 3745-514 : 2009 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 514: CABLE TWIST BEND |
| BS EN 3733-003:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuous Plug connector for cable according to EN 4532, product standard |
| I.S. EN 3745-506:2009 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
| 11/30247047 DC : 0 | BS EN 4674-004 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - UN-PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREE C +200 DEGREE C - PRODUCT STANDARD |
| 13/30294318 DC : 0 | BS EN 2591-326 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 326: FUEL FIRE IMMERSION AND CONTAINMENT |
| BS EN 3155-032:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product standard |
| BS EN 3733-005:2007 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, two hole fixing for cable according to EN 4532, product standard |
| 11/30245870 DC : 0 | BS EN 3660-065 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 065: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| 17/30361267 DC : 0 | BS EN 3745-412 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE |
| 14/30300820 DC : 0 | BS EN 3660-034 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 034: MEMORY METAL RINGS FOR THE ATTACHMENT OF SCREENS - PRODUCT STANDARD |
| 14/30300790 DC : 0 | BS EN 3660-031 - AEROSPACE SERIES- CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 031: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 3645 - PRODUCT STANDARD |
| UNI EN 3745-515 : 2012 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: BUFFER INSERTION FORCE |
| BS EN 3660-010:2010 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot. Product standard |
| BS EN 3660-021:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 90°, unsealed, self-locking with clamp strain relief for EN 3645. Product standard |
| BS EN 3660-007:2010 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, self-locking, style C, 90°, shielded (cone grounding), unsealed with clamp strain relief. Product standard |
| BS EN 3660-005:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard |
| 14/30300792 DC : 0 | BS EN 3660-035 - AEROSPACE SERIES- CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 035: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 3645 - PRODUCT STANDARD |
| 15/30328131 DC : 0 | BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
| 11/30244376 DC : 0 | BS EN 3155-072 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 072: CONTACTS, ELECTRICAL, QUADRAX, SIZE 08, 100 OHMS, MALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| 08/30195519 DC : 0 | BS EN 4008-007 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 007: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| BS EN 3660-066:2017 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed. Product standard |
| BS EN 3733-101:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous Protective cover receptacle. Product standard |
| 16/30342088 DC : DRAFT APR 2016 | BS EN 3745-506 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
| 11/30247043 DC : 0 | BS EN 4674-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3745-405:2012 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: LOW/HIGH TEMPERATURE BEND TEST |
| BS EN 3733-106:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Receptacle connector dummy jam nut. Product standard |
| BS EN 3733-108:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Cable support boot. Product standard |
| 14/30310773 DC : 0 | BS EN 3745-202 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 202: FIBRE DIMENSIONS |
| 11/30247046 DC : 0 | BS EN 4674-003 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREE C +200 DEGREE C - PRODUCT STANDARD |
| 10/30239067 DC : 0 | BS EN 3545-007 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES - 55 DEGREE C TO 175 DEGREE C - PART 007: CABLE CLAMP - PRODUCT STANDARD |
| 13/30295417 DC : 0 | BS EN 3745-517 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE TIE CLAMPING TEST |
| 15/30334247 DC : 0 | BS EN 3660-005 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 005: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED WITH CLAMP STRAIN RELIEF FOR EN 2997 AND EN3646 - PRODUCT STANDARD |
| 14/30298728 DC : 0 | BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| NF EN 4626-202 : 2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD |
| 06/30160165 DC : 0 | BS EN 3155-075 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 075: CONTACTS, ELECTRICAL, QUADRAX, SIZE 08, FEMALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| 13/30295411 DC : 0 | BS EN 3745-510 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST |
| TR 4654-001 : 1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, EN 4644 SPECIFIC PRODUCTS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4165-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| NF EN 3660-019 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| PREN 3660-027 : 200P2 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 027: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| PREN 4008-008 : 200P2 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 008: POSITIONER FOR CRIMPING TOOL M22520/7-01 - PRODUCT STANDARD |
| PREN 2591-326 : DRAFT 2017 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 326: FIRE IMMERSION TEST |
| PREN 2591-211 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 211: CAPACITANCE |
| PREN 4165-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| PREN 2591-214 : 200P2 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 214: LIGHTNING STRIKE, CURRENT AND VOLTAGE PULSE |
| PREN 3660-062 : DRAFT 2014 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| PREN 3545-002 : 200P5 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| I.S. EN 3155-064:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 064: CONTACTS, ELECTRICAL, COAXIAL, 50 OHMS, SIZE 1, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| PREN 3660-016 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 016: GROMMET NUT, STYLE A, SELF-LOCKING AND NON SELF-LOCKING |
| PREN 4008-007 : 200P2 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 007: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| TR 4680 : 1 | AEROSPACE SERIES - CONTACTS, ELECTRICAL, QUALIFICATION FOR CHANGE MATERIALS AND PROCESS |
| PREN 3745-503 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 503: SCRAPE ABRASION |
| ONORM EN 3745-202 : 2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 202: FIBRE DIMENSIONS |
| I.S. EN 3660-016:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 016: GROMMET NUT, STYLE A, SELF-LOCKING AND NON SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| I.S. EN 3733-104:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 104: RECEPTACLE CONNECTOR DUMMY FOUR HOLES FIXING - PRODUCT STANDARD |
| I.S. EN 3733-105:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 105: RECEPTACLE CONNECTOR DUMMY TWO HOLES FIXING - PRODUCT STANDARD |
| NF EN 3155-074 : 2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 074: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, MALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| I.S. EN 3745-514:2009 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 514: CABLE TWIST BEND |
| I.S. EN 4008-004:2017 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 004: DIE FOR CRIMPING TOOL M22520/5-01 - PRODUCT STANDARD |
| NF EN 3155-075 : 2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 075: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, FEMALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| NF EN 3660-008 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 008: CABLE OUTLET, SELF-LOCKING, STYLE C, 45 DEGREES, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 4008-011:2006 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 011: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
| I.S. EN 4008-012:2006 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 012: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| DIN EN 3646-001:2016-03 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 2591-6306:2001 | Elements of electrical and optical connection. Test methods Optical elements. Mould growth |
| BS EN 2591-601:2001 | Elements of electrical and optical connection. Test methods Optical elements. Insertion loss |
| BS EN 2591-702:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Measurement of signal distortion of couplers |
| BS EN 4008-001:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Technical specification |
| BS EN 3745-301:2012 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Attenuation |
| BS EN 3708-002:2006 | Aerospace series. Modular interconnection systems. Terminal junction systems Performance specification |
| BS EN 2591-701:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Measurement of open circuit impedance of couplers |
| BS EN 2591-217:2002 | Elements of electrical and optical connection. Test methods Voltage drop under specified current for terminal lugs and in-line splices |
| BS EN 2591-609:2005 | Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable cyclic flexing |
| I.S. EN 4008-008:2011 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 008: POSITIONER FOR CRIMPING TOOL M22520/7-01 - PRODUCT STANDARD |
| I.S. EN 3545-001:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 2591-315:2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 315: FLUID RESISTANCE |
| I.S. EN 3646-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3745-410:2015 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 410: THERMAL LIFE |
| I.S. EN 3745-510:2017 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST |
| I.S. EN 2591-214:2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 214: LIGHTNING STRIKE, CURRENT AND VOLTAGE PULSE |
| I.S. EN 2591-402:2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 402: SHOCK |
| I.S. EN 3545-002:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| I.S. EN 3545-007:2014 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 007: CABLE CLAMP - PRODUCT STANDARD |
| I.S. EN 2591-420:2006 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 420: MECHANICAL STRENGTH OF REAR ACCESSORIES |
| I.S. EN 4008-007:2011 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 007: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| I.S. EN 3745-301:2012 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION |
| ONORM EN 3745-412 : 2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE |
| NF EN 3745-412 : 2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE |
| I.S. EN 3745-516:2017 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST |
| PREN 3660-065 : DRAFT 2014 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 065: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 2997 - PRODUCT STANDARD |
| BS EN 2591-221:2007 | Aerospace series. Elements of electrical and optical connection. Test methods Voltage standing wave ratio (VSWR) |
| 16/30350077 DC : 0 | BS EN 3155-075 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 075: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, FEMALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| BS EN 3660-006:2010 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain relief. Product standard |
| 11/30244377 DC : 0 | BS EN 3155-073 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 073: CONTACTS, ELECTRICAL, QUADRAX, SIZE 08, 100 OHMS, FEMALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| 10/30239073 DC : 0 | BS EN 4530-008 - AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 008: SEALING SLEEVES FOR QUADRAX CONTACS EN 3155-074 AND EN 3155-075 - PRODUCT STANDARD |
| BS EN 3745-516:2017 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Severe cable bend test |
| 17/30368045 DC : 0 | PREN 4857-1 - AEROSPACE SERIES- MINIATURE CONNECTORS, HIGH DENSITY, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS OR 200 DEGREES C CONTINUOUS - SHELL SIZES: 05 TO 07 - PART 001: TECHNICAL SPECIFICATION |
| 12/30275773 DC : 0 | BS EN 3660-062 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| NF EN 3660-005 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 005: CABLE OUTLET, STYLE A, 90 DEGREE, UNSEALED WITH CLAMP STRAIN RELIEF FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| 12/30275349 DC : 0 | BS EN 3745-410 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 410: THERMAL LIFE |
| 16/30350076 DC : 0 | BS EN 3155-074 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 074: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, MALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| I.S. EN 2591-221:2007 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 221: VOLTAGE STANDING WAVE RATIO (VSWR) |
| 08/30195502 DC : 0 | BS EN 4008-008 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 008: POSITIONER FOR CRIMPING TOOL M22520/7-01 - PRODUCT STANDARD |
| BS EN 2591-222:2007 | Aerospace series. Elements of electrical and optical connection. Testm ethods Insertion loss (I.L.) |
| 11/30245753 DC : 0 | BS EN 3660-062 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR 3645 - PRODUCT STANDARD |
| BS EN 3733-004:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, four hole fixing cable according to EN 4532, product standard |
| BS EN 3660-020:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645. Product standard |
| BS EN 3733-103:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Protective cover jam nut receptacle. Product standard |
| BS EN 3745-603:2008 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Nuclear radiation |
| BS EN 3745-405:2012 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Low/high temperature bend test |
| 17/30362963 DC : 0 | BS EN 3155-084 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 084: CONTACTS, ELECTRICAL, FEMALE - TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
| 09/30206879 DC : 0 | BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION |
| 17/30360895 DC : 0 | BS EN 3660-062 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 3645 - PRODUCT STANDARD |
| BS EN 3745-515:2012 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Buffer insertion force |
| 15/30333205 DC : 0 | BS EN 3660-019 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREE, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| 15/30328139 DC : 0 | BS EN 3660-065 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 065: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 2997 AND EN 3646 - PRODUCT STANDARD |
| PREN 2591-507 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 507: PLATING POROSITY |
| 06/30160162 DC : 0 | BS EN 3155-074 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 074: CONTACTS, ELECTRICAL, QUADRAX, SIZE 08, MALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| PREN 2591-307 : 200P2 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST |
| PREN 3660-032 : DRAFT 2015 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 032: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 2997 - PRODUCT STANDARD |
| PREN 2591-325 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 325: ICE RESISTANCE |
| PREN 4008-004 : DRAFT 2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 004: DIE FOR CRIMPING TOOL M22520/5-01 - PRODUCT STANDARD |
| PREN 3660-066 : DRAFT 2015 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 066: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 2997 AND EN 3646 - PRODUCT STANDARD |
| TR 4837 : 2014 | AEROSPACE SERIES - APPLICABLE CRIMPING TOOLS FOR ELECTRICAL CONTACT PRODUCT STANDARDS EN 3155-003, EN 3155-008 AND EN 3155-009 FOR CONTACT SIZE # 10 AND BARREL SIZE # 10 ONLY |
| PREN 3745-510 : 200P3 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST |
| RE.AERO 64033 : 1999 | ESSAIS DE QUALIFICATION DE RACCORDEMENT DES BLINDAGES ET SURBLINDAGES SUR ACCESSORIES DE CONNEXION |
| NF EN 3733-101 : 2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 101: PROTECTIVE COVER RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 4008-003:2017 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 003: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| I.S. EN 4640-001:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 3660-006 : 2011 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 006: CABLE OUTLET, SELF-LOCKING, STYLE C, STRAIGHT, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 2591-227:2015 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 227: PARTIAL DISCHARGES TEST |
| I.S. EN 3660-018:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 3660-21:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 021: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED |
| I.S. EN 3660-005:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 005: CABLE OUTLET, STYLE A, 90 DEGREE, UNSEALED WITH CLAMP STRAIN RELIEF FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| NF EN 3733-104 : 2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 104: RECEPTACLE CONNECTOR DUMMY FOUR HOLES FIXING - PRODUCT STANDARD |
| NF EN 4626-001 : 2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| EN 3745-202:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
| EN 3660-004:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard |
| UNI EN 2591-403 : 2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION |
| I.S. EN 3660-004:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 004: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED WITH CLAMP STRAIN RELIEF FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| I.S. EN 4626-202:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD |
| NF EN 3155-026 : 2011 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 026: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS R - PRODUCT STANDARD |
| ONORM EN 3745-404 : 2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK |
| BS EN 3745-703:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Durability of manufacturer\'s marking |
| BS EN 2591-611:2001 | Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable torsion |
| BS EN 2591-501:2002 | Elements of electrical and optical connection. Test methods Soft solderability |
| BS EN 4008-013:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| BS EN 3545-004:2005 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Connectors with male contacts. Product standard |
| BS EN 4008-006:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/7. Product standard |
| EN 3660-018 : 2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 018: Cable outlet, style A, 90°, unsealed, with cable tie strain relief - Product standard |
| EN 3545-008:2006 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard |
| EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| EN 3745-412:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance |
| EN 3733-007:2007 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 µm/280 µm fibre) - Product standard |
| EN 2591-325:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 325: Ice resistance |
| EN 2591-218:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling |
| EN 3660-011:2010 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 011: Cable outlet, style K, 90°, shielded, sealed, for heat shrinkable boot - Product standard |
| UNI EN 2591-307 : 2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST |
| UNI EN 2591-214 : 2013 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 214: LIGHTNING STRIKE, CURRENT AND VOLTAGE PULSE |
| UNI EN 4008-008 : 2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 008: POSITIONER FOR CRIMPING TOOL M22520/7-01 - PRODUCT STANDARD |
| EN 4008-005:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 005: Positioner for crimping tool M22520/2-01 - Product standard |
| I.S. EN 3745-412:2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE |
| UNI EN 3745-301 : 2012 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION |
| UNI EN 2591-402 : 2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 402: SHOCK |
| 15/30333206 DC : 0 | BS EN 3660-018 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREE, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| BS EN 3155-001:2009 | Aerospace series. Electrical contacts used in elements of connection Technical specification |
| BS EN 3733-001:2009 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Technical specification |
| 98/707384 DC : DRAFT MAY 1998 | PREN 3745-513 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 513: CRUSH RESISTANCE |
| UNI EN 3660-008 : 2011 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 008: CABLE OUTLET, SELF-LOCKING, STYLE C, 45 DEGREES, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| 11/30245867 DC : 0 | BS EN 3660-064 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 064: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELF-LOCKING FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| 16/30350072 DC : 0 | BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| 11/30247044 DC : 0 | BS EN 4674-002 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 002: GENERAL AND LIST OF PRODUCT STANDARD |
| BS EN 3660-018:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 90°, unsealed, with cable tie strain relief. Product standard |
| BS EN 3733-105:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Receptacle connector dummy two holes fixing. Product standard |
| 16/30352466 DC : 0 | BS EN 2591-229 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 229: BIT ERROR RATE |
| 02/706955 DC : DRAFT MAY 2002 | PREN 4530-006 - AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 006: SEALING SLEEVES FOR EXTERNAL DIAMETER CABLE 4,68 MM TO 5,05 MM - PRODUCT STANDARD |
| 09/30210121 DC : DRAFT SEP 2009 | BS EN 4531-101 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 101: OPTICAL CONTACT FOR EN 4641-100 CABLE -55 DEGREE C TO 125 DEGREE C - PRODUCT STANDARD |
| BS EN 4626-101:2008 | Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts Optical contact (sub-assembly) for plug. Product standard |
| 00/717215 DC : DRAFT NOV 2000 | PREN 3155-055 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 055: CONTACTS, ELECTRICAL FEMALE, THERMOCOUPLE, NIAL TYPE C, CRIMP, CLASS T - PRODUCT STANDARD |
| BS EN 4626-001:2008 | Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts Technical specification |
| BS EN 3745-517:2017 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cable tie clamping test |
| 14/30311564 DC : DRAFT AUG 2014 | BS EN 3660-066 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 066: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| BS EN 3660-026:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 90°, unsealed, with cable tie strain relief for EN 3646. Product standard |
| 16/30353141 DC : 0 | BS EN 3745-404 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK |
| BS EN 3660-016:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Grommet nut, style A, self-locking and non self-locking for EN 3645. Product standard |
| UNI EN 4008-007 : 2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 007: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| UNI EN 4008-018 : 2014 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOL AND ASSOCIATED ACCESSORIES - PART 018: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| BS EN 3660-031:2017 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed. Product standard |
| UNI EN 3660-010 : 2011 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 010: CABLE OUTLET, STYLE K, STRAIGHT, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| BS EN 3660-017:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard |
| UNI EN 3660-011 : 2011 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 011: CABLE OUTLET, STYLE K, 90 DEGREES, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| BS EN 2591-403:2012 | Aerospace series. Elements of electrical and optical connection. Test methods Sinusoidal and random vibration |
| 00/717217 DC : DRAFT NOV 2000 | PREN 3155-057 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 057: CONTACTS, ELECTRICAL FEMALE, THERMOCOUPLE, NICR TYPE C, CRIMP, CLASS T - PRODUCT STANDARD |
| BS EN 4008-018:2014 | Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| 14/30297297 DC : 0 | BS EN 4008-004 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 004: DIE FOR CRIMPING TOOL M22520/5-01 |
| NF EN 3745-202 : 2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 202: FIBRE DIMENSIONS |
| 17/30360897 DC : 0 | BS EN 3660-063 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 063: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELFLOCKING FOR EN 3645 - PRODUCT STANDARD |
| BS EN 3733-104:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Receptacle connector dummy four holes fixing. Product standard |
| 15/30334248 DC : 0 | BS EN 3660-004 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 004: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED WITH CLAMP STRAIN RELIEF FOR EN 2997 AND EN 3646 - PRODUCT STANDARD |
| 13/30287034 DC : 0 | BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3660-027:2013 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 45°, unsealed, with cable tie strain relief for EN 3646. Product standard |
| 14/30297296 DC : 0 | BS EN 4008-003 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - PART 003: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| BS EN 4640-001:2009 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification |
| UNI EN 3660-027 : 2013 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 027: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| BS EN 3660-019:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 45°, unsealed, with cable tie strain relief. Product standard |
| NF EN 2591-221 : 2008 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 221: VOLTAGE STANDING WAVE RATIO (VSWR) |
| BS EN 3155-074:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, quadrax, size 8, male, type E, crimp, class R. Product standard |
| PREN 2591-6321 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6321: OPTICAL ELEMENTS - DAMP HEAT, CYCLIC TEST |
| PREN 2591-318 : DRAFT 2017 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 318: FIRE-RESISTANCE |
| PREN 4640-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| TR 4653 : 2 | AEROSPACE SERIES - TECHNICAL SPECIFICATION OF PLATING OF CONNECTORS - CADMIUM AND HEXAVALENT CHROMIUM REPLACEMENT |
| NF EN 3660-018 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| PREN 3745-703 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 703: DURABILITY OF MANUFACTURER'S MARKING |
| PREN 3155-075 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 075: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, FEMALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| PREN 3745-516 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST |
| PREN 3745-506 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
| PREN 3745-514 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE TEST METHODS - PART 514: CABLE TWIST BEND |
| I.S. EN 4626-001:2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREE C TO 125 DEGREE C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3733-103:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 103: PROTECTIVE COVER JAM NUT RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 3155-001:2016 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4626-201:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 201: OPTICAL CONTACT (SUB-ASSEMBLY) FOR RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 3733-006:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 006: RECEPTACLE, CONNECTOR, JAM NUT FIXING FOR CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
| I.S. EN 3745-202:2006 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 202: FIBRE DIMENSIONS |
| I.S. EN 3745-515:2012 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: BUFFER INSERTION FORCE |
| I.S. EN 3733-108:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 108: CABLE SUPPORT BOOT - PRODUCT STANDARD |
| EN 3660-003:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard |
| NF EN 3660-003 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 003: GROMMET NUT, STYLE A FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| I.S. EN 4645-001:2010 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3660-003:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 003: GROMMET NUT, STYLE A FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| I.S. EN 3660-019:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| BS EN 2591-6316:2001 | Elements of electrical and optical connection. Test methods Optical elements. Ozone resistance |
| BS EN 2591-307:2012 | Aerospace series. Elements of electrical and optical connection. Test methods Salt mist |
| 13/30292601 DC : 0 | BS EN 3646-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 2591-6318:2002 | Elements of electrical and optical connection. Test methods Optical elements. Fire resistance |
| BS EN 3716-001:2006 | Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification |
| BS EN 2591-7301:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Temperature endurance of couplers |
| BS EN 2591-704:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Measurement of turns ratio on a transformer used in a coupler |
| BS EN 2591-509:2001 | Elements of electrical and optical connection. Test methods Adhesion of coating on contacts |
| BS EN 2591-617:2002 | Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Temperature cycling |
| BS EN 2591-706:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Transmission test |
| BS EN 2591-612:2001 | Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable axial compression |
| BS EN 2591-223:2007 | Aerospace series. Elements of electrical and optical connection. Test methods Measurement of characteristic impedance of a coaxial connector or contact |
| BS EN 3745-513:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Crush resistance |
| BS EN 3155-025:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard |
| BS EN 2591-421:2002 | Elements of electrical and optical connection. Test methods Free fall |
| BS EN 3745-306:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Variation of attenuation during temperature cycling |
| BS EN 4008-007:2011 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| BS EN 3545-007:2014 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C Cable clamp. Product standard |
| BS EN 2591-416:2001 | Elements of electrical and optical connection. Test methods Contact bending strength |
| BS EN 2591-417:2001 | Elements of electrical and optical connection. Test methods Tensile strength (crimped connection) |
| BS EN 2591-6321:2002 | Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Damp heat, cyclic test |
| BS EN 3745-401:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Accelerated ageing |
| BS EN 2591-428:2002 | Elements of electrical and optical connection. Test methods Sinusoidal vibrations with passage of current for crimped terminal lugs |
| BS EN 3218-011:2006 | Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors. Product standard |
| BS EN 2591-6405:2002 | Elements of electrical and optical connection. Test methods Optical elements. Axial load |
| BS EN 2591-512:2002 | Elements of electrical and optical connection. Test methods Effectiveness of non-removable fixing of hermetically sealed connector shell |
| BS EN 2591-506:2001 | Elements of electrical and optical connection. Test methods Use of tools |
| BS EN 3745-302:2002 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Numerical aperture |
| BS EN 2591-6301:2001 | Elements of electrical and optical connection. Test methods Optical elements. Endurance at temperature |
| BS EN 3733-009:2006 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre). Product standard |
| BS EN 2591-422:2002 | Elements of electrical and optical connection. Test methods Locking wire hole strength |
| BS EN 3745-509:2002 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Kink test |
| BS EN 3733-007:2007 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Ferrule (optical contact) for EN 4532 (200 ?m/280 ?m fibre). Product standard |
| BS EN 3745-510:2017 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Bending test |
| BS EN 3708-001:2006 | Aerospace series. Modular interconnection systems. Terminal junction systems Technical specification |
| BS EN 3567-001:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Technical specification |
| BS EN 4008-008:2011 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/7-01. Product standard |
| BS EN 3733-008:2006 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre). Product standard |
| BS EN 3745-504:2002 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Micro bending test |
| BS EN 3545-003:2005 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Connectors with female contacts. Product standard |
| BS EN 2591-418:2001 | Elements of electrical and optical connection. Test methods Gauge insertion/extraction forces (female contacts) |
| BS EN 2591-325:2002 | Elements of electrical and optical connection. Test methods Ice resistance |
| BS EN 2591-513:2002 | Elements of electrical and optical connection. Test methods Magnetic permeability |
| BS EN 4008-017:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Head for crimping tool M22520/4-01. Product standard |
| BS EN 2591-6307:2001 | Elements of electrical and optical connection. Test methods Optical elements. Salt mist |
| BS EN 2591-427:2001 | Elements of electrical and optical connection. Test methods Robustness of protective cover attachment |
| BS EN 3646-001:2015 | Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Technical specification |
| BS EN 2591-415:2001 | Elements of electrical and optical connection. Test methods Test probe damage (female contacts) |
| BS EN 2591-424:2001 | Elements of electrical and optical connection. Test methods Stripping force, solderless wrapped connections |
| BS EN 3567-003:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Single in-line couplers. Product standard |
| BS EN 2591-508:2002 | Elements of electrical and optical connection. Test methods Measurement of thickness of coating on contacts |
| BS EN 4008-015:2007 | Aerospace series. Elements of electrical and optical connection. Crimping tool and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| BS EN 3155-024:2006 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard |
| BS EN 2591-603:2002 | Elements of electrical and optical connection. Test methods Optical elements. Change of power distribution |
| BS EN 2591-214:2012 | Aerospace series. Elements of electrical and optical connection. Test methods Lightning strike, current and voltage pulse |
| BS EN 3745-412:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Humidity resistance |
| BS EN 2591-503:2001 | Elements of electrical and optical connection. Test methods Contact deformation after crimping |
| BS EN 2591-502:2001 | Elements of electrical and optical connection. Test methods Restricted entry |
| BS EN 2591-6414:2002 | Elements of electrical and optical connection. Test methods Optical elements. Unmating of lanyard release optical connection elements |
| BS EN 2591-224:2007 | Aerospace series. Elements of electrical and optical connection. Test methods RF leakage |
| BS EN 3745-508:2002 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Torsion |
| EN 2591-222:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.) |
| EN 3708-001 : 2006 | AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 3218-009:2006 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard |
| EN 3660-010:2010 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot - Product standard |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 3660-007:2010 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 007: Cable outlet, self-locking, style C, 90°, shielded (cone grounding), unsealed with clamp strain relief - Product standard |
| EN 3745-603:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation |
| EN 3155-033:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 033: Contacts, electrical, coaxial, 50 ohms, size 5, female, type D, crimp, class R - Product standard |
| EN 3733-008:2006 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard |
| EN 3733-108:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 108: Cable support boot - Product standard |
| EN 2591-217:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices |
| EN 3660-026:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 026: Cable outlet, style A , 90°, unsealed, with cable tie strain relief for EN 3646 - Product standard |
| EN 3708-002:2006 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 4008-012:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 012: Positioner for crimping tool M22520/2-01 - Product standard |
| EN 3218-010:2006 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard |
| EN 4165-001:2015/AC:2017 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test |
| EN 2591-420:2006 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories |
| EN 3155-064:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 064: Contacts, electrical, coaxial, 50 ohms, size 1, female, type D, solder, class R - Product standard |
| EN 3155-063:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard |
| EN 3745-405:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test |
| EN 2591-603:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution |
| EN 3155-025:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard |
| EN 3660-017:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard |
| EN 3660-006:2010 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 006: Cable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain relief - Product standard |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 3745-401:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
| EN 3733-103:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 103: Protective cover jam nut receptacle - Product standard |
| EN 3745-503:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
| EN 4008-004:2017 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 004: Die for crimping tool M22520/5-01 - Product standard |
| EN 2591-607:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling |
| EN 3372-001:2007 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 001: Technical specification |
| EN 3733-106:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 106: Receptacle connector dummy jam nut - Product standard |
| EN 4008-001:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification |
| EN 3745-504:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 4645-001:2010 | Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification |
| EN 3733-001 : 2009 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 3745-507:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-through |
| EN 3660-035:2017 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard |
| EN 3745-512:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
| EN 4529-003:2006 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard |
| EN 3660-008:2010 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 008: Cable outlet, self-locking, style C, 45°, shielded (cone grounding), unsealed with clamp strain relief - Product standard |
| EN 3218-001 : 2006 | AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-6321:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test |
| EN 2591-226:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level |
| EN 4008-013:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 013: Positioner for crimping tool M22520/2-01 - Product standard |
| EN 3545-003 : 2005 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 003: CONNECTORS WITH FEMALE CONTACTS - PRODUCT STANDARD |
| EN 2591-221:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR) |
| EN 4008-015:2007 | Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 015: Positioner for crimping tool M22520/2-01 - Product standard |
| EN 4530-001:2006 | Aerospace series - Sealing sleeves used in elements of connection - Part 001: Technical specification |
| EN 3733-003:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard |
| EN 3745-509:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test |
| EN 3155-074:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R - Product standard |
| EN 4008-003:2017 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 003: Positioner for crimping tool M22520/2-01 - Product standard |
| EN 3660-027:2013 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 027: Cable outlet, style A, 45°, unsealed, with cable tie strain relief for EN 3646 - Product standard |
| EN 3660-025:2013 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard |
| EN 2591-224:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage |
| EN 3660-020:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 020: Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645 - Product standard |
| EN 3646-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| EN 4639-001:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification |
| EN 3745-404:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock |
| EN 3733-006:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 006: Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard |
| EN 3745-515:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force |
| EN 4008-014:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 014: Turret for crimping tool M22520/31-01 - Product standard |
| EN 4626-101:2008 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 101: Optical contact (sub-assembly) for plug - Product standard |
| EN 3745-703:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking |
| EN 3745-513:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
| EN 2591-512:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell |
| EN 3745-517:2017 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test |
| EN 3660-031:2017 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 031: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard |
| EN 3660-032:2017 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard |
| EN 3745-406:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
| EN 3733-005:2007 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532, product standard |
| EN 3745-302 : 2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302: Numerical aperture |
| EN 4008-018 : 2014 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOL AND ASSOCIATED ACCESSORIES - PART 018: POSITIONER FOR CRIMPING TOOL M22520/2-01 - PRODUCT STANDARD |
| EN 3545-002:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements |
| EN 4008-017:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 017: Head for crimping tool M22520/4-01 - Product standard |
| EN 3733-004:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 004: Receptacle, connector, four hole fixing cable according to EN 4532, product standard |
| EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss |
| EN 3745-510:2017 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test |
| EN 3218-011:2006 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard |
| EN 3745-516:2017 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test |
| EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling |
| EN 2591-609:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| EN 3745-502:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres |
| EN 2591-421:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall |
| EN 2591-423:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength |
| EN 3660-019:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 019: Cable outlet, style A, 45°, unsealed, with cable tie strain relief - Product standard |
| EN 3545-007:2014 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 007: Cable clamp - Product standard |
| EN 4626-001:2008 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures -65 °C to 125 °C (cable dependent) - Flush contacts - Part 001: Technical specification |
| EN 2591-606:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 606: Optical elements - Crosstalk |
| EN 3733-101:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 101: Protective cover receptacle - Product standard |
| EN 2591-227:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test |
| EN 2591-219:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices |
| EN 3716-001 : 2006 | AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION |
| EN 2591-515:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability |
| EN 3660-066:2017 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 066: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard |
| EN 3660-021:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 021: Cable outlet, style A, 90°, unsealed, self-locking with clamp strain relief for EN 3645 - Product standard |
| EN 4008-007:2011 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard |
| EN 2591-214:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse |
| EN 4008-008:2011 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard |
| EN 4008-011:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 011: Positioner for crimping tool M22520/2-01 - Product standard |
| EN 2591-428:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs |
| EN 3660-016:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 016: Grommet nut, style A, self-locking and non self-locking for EN 3645 - Product standard |
| EN 4640-001:2009 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification |
| EN 4626-201 : 2009 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 201: Optical contact (sub-assembly) for receptacle - Product standard |
| EN 3745-410:2015 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life |
| EN 3155-075:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard |
| EN 3545-001:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification |
| EN 3745-306:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling |
| EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
| EN 3733-105:2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 105: Receptacle connector dummy two holes fixing - Product standard |
| EN 2591-422:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength |
| EN 2591-614:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression |
| EN 3733-009:2006 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard |
| EN 4008-006:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 006: Positioner for crimping tool M22520/7 - Product standard |
| EN 4626-202:2009 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 202: Optical contact assembly for 900 µm buffered fibre receptacle - Product standard |
| EN 3155-032:2009 | Aerospace series - Electrical contacts used in elements of connection - Part 032: Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R - Product standard |
| EN 4529-001:2006 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification |
| EN 3745-514:2009 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend |
| EN 2591-6323:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices) |
| EN 2591-223:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact |
| EN 3733-104 : 2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 104: Receptacle connector dummy four holes fixing - Product standard |
| EN 3745-501:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test |
| EN 3545-004 : 2005 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 004: CONNECTORS WITH MALE CONTACTS - PRODUCT STANDARD |
| EN 3745-508:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion |
| EN 3745-301:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation |
| EN 2591-225:2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| EN 3155-024:2006 | Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard |
| I.S. EN 3733-106:2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 106: RECEPTACLE CONNECTOR DUMMY JAM NUT - PRODUCT STANDARD |
| BS EN 4645-001:2010 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Technical specification |
| 13/30295414 DC : 0 | BS EN 3745-516 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST |
| BS EN 3660-035:2017 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed. Product standard |
| 15/30334249 DC : 0 | BS EN 3660-003 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 003: GROMMET NUT, STYLE A FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| NF EN 3660-026 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 026: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| I.S. EN 3660-035:2017 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 035: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED - PRODUCT STANDARD |
| BS EN 4165-001:2015 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Technical specification |
| BS EN 3155-064:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, 50 ohms size 1, female, type D, solder, class R. Product standard |
| BS EN 3733-006:2008 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard |
| 13/30288325 DC : 0 | BS EN 2591-403 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION |
| 14/30298727 DC : 0 | BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| NF EN 3155-063 : 2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 063: CONTACTS, ELECTRICAL, COAXIAL, 50 OHMS, SIZE 1, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD |
| BS EN 4626-201:2009 | Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts Optical contact (sub-assembly) for receptacle. Product standard |
| 00/717216 DC : DRAFT NOV 2000 | PREN 3155-056 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 056: CONTACTS, ELECTRICAL MALE, THERMOCOUPLE, NICR TYPE C, CRIMP, CLASS T - PRODUCT STANDARD |
| BS EN 4008-011:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Positioner for crimping tool M22520/2-01. Product standard |
| 16/30350073 DC : 0 | BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025 - CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD |
| 17/30362964 DC : 0 | BS EN 3155-085 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 085: CONTACTS, ELECTRICAL, MALE - TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
| UNI EN 3660-007 : 2011 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 007: Cable outlet, self-locking, style C, 90°, shielded (cone grounding), unsealed with clamp strain relief - Product standard |
| BS EN 3660-032:2017 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard |
| NF EN 3745-506 : 2010 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
| 17/30360898 DC : 0 | BS EN 3660-064 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 064: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED, SELFLOCKING - PRODUCT STANDARD |
| I.S. EN 3745-603:2008 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 603: NUCLEAR RADIATION |
| BS EN 3155-033:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical,coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product Standard |
| BS EN 3155-063:2009 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, 50 ohms size 1, male, type D, solder, class R. Product standard |
| BS EN 3660-025:2013 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646. Product standard |
| PREN 2591-227 : DRAFT 2014 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 227: PARTIAL DISCHARGES TEST |
| I.S. EN 2591-403:2012 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION |
| PREN 2591-617 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 617: OPTICAL ELEMENTS - TEMPERATURE CYCLING |
| PREN 4008-006 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - POSITIONER FOR CRIMPING TOOL M22520/7 - PRODUCT STANDARD |
| TR 4831 : 2014 | AEROSPACE SERIES - APPLICABLE CRIMPING TOOLS FOR ELECTRICAL CONTACT PRODUCT STANDARDS - EN 3155-065 AND EN 3155-083 |
| TR 4732 : 2015 | AEROSPACE SERIES - COMPATIBILITY VALIDATION PROCEDURE BETWEEN COMPONENTS WITH CADMIUM AND/OR CHROMIUM 6 WITH THEIR 'GREEN' SUBSTITUTE |
| I.S. EN 3660-006:2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 006: CABLE OUTLET, SELF-LOCKING, STYLE C, STRAIGHT, SHIELDED (CONE GROUNDING), UNSEALED WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| PREN 4639-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| PREN 3745-513 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 513: CRUSH RESISTANCE |
| PREN 3155-076 : 200P1 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 076: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS R - PRODUCT STANDARD |
| PREN 3745-410 : 200P2 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 410: THERMAL LIFE |
| PREN 3660-011 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 011: CABLE OUTLET, STYLE K, 90 DEGREES, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| I.S. EN 3660-031:2017 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 031: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED - PRODUCT STANDARD |
| I.S. EN 3733-005:2007 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 005: RECEPTACLE, CONNECTOR, TWO HOLE FIXING CABLE ACCORDING TO EN 4532, PRODUCT STANDARD |
| I.S. EN 3660-066:2017 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 066: CABLE OUTLET, STYLE K, 90 DEGREES, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED - PRODUCT STANDARD |
| NF EN 3660-011 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 011: CABLE OUTLET, STYLE K, 90 DEGREES, SHIELDED, SEALED, FOR HEAT SHRINKABLE BOOT - PRODUCT STANDARD |
| NF EN 3660-004 : 2010 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 004: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED WITH CLAMP STRAIN RELIEF FOR EN 2997 AND EN 4067 - PRODUCT STANDARD |
| BS EN 3745-202:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Fibre dimensions |
| NF EN 3733-103 : 2008 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 103: PROTECTIVE COVER JAM NUT RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 3660-032:2017 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 032: CABLE OUTLET, STYLE K, STRAIGHT, FOR HEAT SHRINKABLE BOOT, SHIELDED, SEALED - PRODUCT STANDARD |
| BS EN 3660-003:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Grommet nut, style A for EN 2997 and EN 4067. Product standard |
| EN 3745-506:2009 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance |
| I.S. EN 3660-017:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 3155-075:2009 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 075: CONTACTS, ELECTRICAL, QUADRAX, SIZE 8, FEMALE, TYPE E, CRIMP, CLASS R - PRODUCT STANDARD |
| I.S. EN 3660-025:2013 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 025: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| I.S. EN 3660-027:2013 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 027: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF FOR EN 3646 - PRODUCT STANDARD |
| I.S. EN 4626-101:2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREE C TO 125 DEGREE C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 101: OPTICAL CONTACT (SUB-ASSEMBLY) FOR PLUG - PRODUCT STANDARD |
| I.S. EN 2591-222:2007 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 222: INSERTION LOSS (I.L.) |
| DIN EN 2591-315:2016-01 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 315: FLUID RESISTANCE |
| BS EN 2591-6406:2002 | Elements of electrical and optical connection. Test methods Optical elements. Mechanical endurance |
| BS EN 2591-315:2015 | Aerospace series. Elements of electrical and optical connection. Test methods Fluid resistance |
| BS EN 2591-505:2001 | Elements of electrical and optical connection. Test methods Contact protection effectiveness (scoop-proof) |
| BS EN 4008-014:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories Turret for crimping tool M22520/31-01. Product standard |
| BS EN 2591-6317:2002 | Elements of electrical and optical connection. Test methods Optical elements. Flammability |
| BS EN 4639-001:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification |
| BS EN 2591-6401:2001 | Elements of electrical and optical connection. Test methods Optical elements. Acceleration steady state |
| BS EN 2591-211:2002 | Elements of electrical and optical connection. Test methods Capacitance |
| BS EN 2591-420:2006 | Aerospace series. Elements of electrical and optical connection. Test methods Mechanical strength of rear accessories |
| BS EN 2591-6314:2001 | Elements of electrical and optical connection. Test methods Optical elements. Immersion at low air pressure |
| BS EN 2591-220:2005 | Aerospace series. Elements of electrical and optical connection. Test methods Contact/conductor joint ageing by current and temperature cycling |
| BS EN 2591-6324:2002 | Elements of electrical and optical connection. Test methods Optical elements. Interfacial sealing |
| BS EN 2591-705:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Measurement of stub input impedance of couplers |
| BS EN 2591-614:2002 | Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Connector radial compression |
| BS EN 3745-503:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Scrape abrasion |
| BS EN 3745-501:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Optical fibre proof test |
| BS EN 2591-610:2001 | Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable pulling |
| BS EN 3745-502:2005 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Tensile strength for short length of optical fibres |
| BS EN 3567-004:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Double in-line couplers. Product standard |
| BS EN 2591-703:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Common mode rejection of couplers |
| BS EN 2591-607:2002 | Elements of electrical and optical connection. Test methods Optical elements. Immunity to ambient light coupling |
| BS EN 2591-515:2005 | Aerospace series. Elements of electrical and optical connection. Test methods Hydrolytic stability |
| BS EN 2591-507:2002 | Elements of electrical and optical connection. Test methods Plating porosity |
| BS EN 2591-602:2001 | Elements of electrical and optical connection. Test methods Optical elements. Variation of attenuation and optical discontinuity |
| BS EN 2591-419:2001 | Elements of electrical and optical connection. Test methods Stability of male contacts in insert |
| BS EN 2591-709:2001 | Elements of electrical and optical connection. Test methods Electrical elements. Tensile strength of couplers |
| BS EN 3745-507:2002 | Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cut-through |
| EN 2591 : 1992 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - GENERAL |
| PREN 2346 : 200P1 | AEROSPACE SERIES - FIRE RESISTANT ELECTRICAL CABLES - DIMENSIONS, CONDUCTOR RESISTANCE AND MASS |
| EN 2083 : 2001 | AEROSPACE SERIES - COPPER AND COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
| TR 4257 : 1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - RELATIONSHIP BETWEEN THE NUMBERING SYSTEMS FOR PARTS OF EN 2591 |
| EN 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| PREN 2234 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| EN 3745-201:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual examination |
| EN 2084:2015 | Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.