• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 2591-602:2001

Current
Current

The latest, up-to-date edition.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity
Published date

21-11-2001

Foreword
1 Scope
2 Normative references
3 Preparation of specimens
4 Apparatus
5 Methods

This standard specifies methods of detecting variation of attenuation and optical discontinuity of the transmitted signal during environmental or mechanical testing for optical connection elements (including permanent connections) and fibre optic couplers.It shall be used together with EN 2591-100.

Committee
ASD-STAN
DevelopmentNote
To be read in conjunction with EN 2591-100. (01/2002) Supersedes PREN 2591-F2. (11/2002)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 4640-001:2009 Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification
I.S. EN 3733-004:2008 AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, CONNECTOR, FOUR HOLE FIXING CABLE ACCORDING TO EN 4532, PRODUCT STANDARD
09/30206919 DC : 0 BS EN 3745-301 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION
XP PREN 2591-6303 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6303: OPTICAL ELEMENTS - COLD/LOW PRESSURE AND DAMP HEAT
XP PREN 2591-6318 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6318: OPTICAL ELEMENTS - FIRE RESISTANCE
I.S. EN 4645-001:2010 AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
09/30210064 DC : DRAFT SEP 2009 BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION
PREN 4645-001 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
PREN 4626-001 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION
PREN 3745-301 : 200P2 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION
PREN 4639-102 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 102: OPTICAL CONTACT FOR CABLE EN 4641-102 OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 100 DEGREES C - PRODUCT STANDARD
PREN 3745-515 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: BUFFER INSERTION FORCE
PREN 4639-101 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 101: OPTICAL CONTACT FOR CABLE EN 4641-100 OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 125 DEGREES C - PRODUCT STANDARD
PREN 4626-201 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 201: OPTICAL CONTACT (SUB-ASSEMBLY) FOR RECEPTACLE - PRODUCT STANDARD
I.S. EN 3733-001:2009 AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4626-201:2009 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 201: OPTICAL CONTACT (SUB-ASSEMBLY) FOR RECEPTACLE - PRODUCT STANDARD
BS EN 2591-6402:2001 Elements of electrical and optical connection. Test methods Optical elements. Shock
BS EN 2591-615:2001 Elements of electrical and optical connection. Test methods Optical elements. Connection integrity at temperature
BS EN 2591-6305:2001 Elements of electrical and optical connection. Test methods Optical elements. Rapid change of temperature
BS EN 2591-6403:2001 Elements of electrical and optical connection. Test methods Optical elements. Vibrations
BS EN 4639-101:2007 Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Optical contact for cable EN 4641-100. Operating temperatures between -65°C and 125°C. Product standard
BS EN 2591-6404:2002 Elements of electrical and optical connection. Test methods Optical elements. Transverse load
BS EN 2591-6303:2001 Elements of electrical and optical connection. Test methods Optical elements. Cold/low pressure and damp heat
I.S. EN 3733-003:2008 AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 003: PLUG CONNECTOR FOR CABLE ACCORDING TO EN 4532, PRODUCT STANDARD
BS EN 3733-003:2008 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150°C continuous Plug connector for cable according to EN 4532, product standard
UNI EN 3745-515 : 2012 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: BUFFER INSERTION FORCE
BS EN 4626-202:2009 Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts Optical contact assembly for 900 μm buffered fibre receptacle. Product standard
NF EN 4626-202 : 2009 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD
XP PREN 2591-6305 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6305: OPTICAL ELEMENTS - RAPID CHANGE OF TEMPERATURE
PREN 4641-001 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
XP PREN 2591-612 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 612: OPTICAL ELEMENTS - EFFECTIVENESS OF CABLE ATTACHMENT - CABLE AXIAL COMPRESSION
PREN 4626-101 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 101: OPTICAL CONTACT (SUB-ASSEMBLY) FOR PLUG - PRODUCT STANDARD
NF EN 4641-001 : 2009 AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
BS EN 3745-301:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Attenuation
BS EN 2591-609:2005 Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable cyclic flexing
I.S. EN 3745-301:2012 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION
BS EN 3733-006:2008 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard
BS EN 4626-001:2008 Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts Technical specification
BS EN 3733-001:2009 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Technical specification
I.S. EN 4640-001:2009 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
BS EN 3733-004:2008 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, four hole fixing cable according to EN 4532, product standard
BS EN 3745-515:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Buffer insertion force
XP PREN 2591-609 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 609: OPTICAL ELEMENTS - EFFECTIVENESS OF CABLE ATTACHMENT - CABLE CYCLIC FLEXING
I.S. EN 4641-001:2009 AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
BS EN 4641-001:2009 Aerospace series. Cables, optical, 125 ?m diameter cladding Technical specification
NF EN 4626-001 : 2008 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4626-202:2009 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD
BS EN 2591-611:2001 Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable torsion
EN 2591-610:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachment - Cable pulling
UNI EN 3745-301 : 2012 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 301: ATTENUATION
BS EN 4645-001:2010 Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Technical specification
16/30346718 DC : 0 BS EN 4641-001 - AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
BS EN 3733-005:2007 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous Receptacle, connector, two hole fixing for cable according to EN 4532, product standard
BS EN 4626-101:2008 Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°C (cable dependent). Flush contacts Optical contact (sub-assembly) for plug. Product standard
09/30210121 DC : DRAFT SEP 2009 BS EN 4531-101 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 101: OPTICAL CONTACT FOR EN 4641-100 CABLE -55 DEGREE C TO 125 DEGREE C - PRODUCT STANDARD
09/30209905 DC : 0 BS EN 3745-515 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: CABLE, FIBER OPTIC, BUFFER INSERTION FORCE
XP PREN 2591-6301 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6301: OPTICAL ELEMENTS - ENDURANCE AT TEMPERATURE
PREN 4640-001 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
I.S. EN 3745-515:2012 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 515: BUFFER INSERTION FORCE
BS EN 2591-6318:2002 Elements of electrical and optical connection. Test methods Optical elements. Fire resistance
BS EN 2591-617:2002 Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Temperature cycling
BS EN 2591-612:2001 Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable axial compression
BS EN 4639-102:2007 Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Optical contact for cable EN 4641-102. Operating temperatures between -55°C and 100°C. Product standard
BS EN 2591-6321:2002 Aerospace series. Elements of electrical and optical connection. Test methods Optical elements. Damp heat, cyclic test
BS EN 2591-6405:2002 Elements of electrical and optical connection. Test methods Optical elements. Axial load
BS EN 2591-6301:2001 Elements of electrical and optical connection. Test methods Optical elements. Endurance at temperature
EN 2591-611:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion
EN 2591-6318 : 2001 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6318: OPTICAL ELEMENTS - FIRE RESISTANCE
EN 2591-6303 : 2001 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6303: OPTICAL ELEMENTS - COLD/LOW PRESSURE AND DAMP HEAT
EN 4645-001:2010 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
EN 3733-001 : 2009 AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
EN 2591-6321:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test
EN 2591-6402:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock
EN 3733-003:2008 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard
EN 4639-001:2007 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
EN 2591-6305 : 2001 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6305: OPTICAL ELEMENTS - RAPID CHANGE OF TEMPERATURE
EN 3745-515:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force
EN 3733-006:2008 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 006: Receptacle, connector, jam nut fixing for cable according to EN 4532, product standard
EN 2591-6301 : 2001 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6301: OPTICAL ELEMENTS - ENDURANCE AT TEMPERATURE
EN 4639-102:2007 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between - 55 °C and 100 °C - Product standard
EN 4639-101:2007 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standard
EN 2591-6405:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load
EN 4626-101:2008 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 101: Optical contact (sub-assembly) for plug - Product standard
EN 3733-005:2007 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532, product standard
EN 3733-004:2008 Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 004: Receptacle, connector, four hole fixing cable according to EN 4532, product standard
EN 2591-617:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling
EN 2591-609:2005 Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing
EN 4626-001:2008 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures -65 °C to 125 °C (cable dependent) - Flush contacts - Part 001: Technical specification
EN 2591-6401 : 2001 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 6401: OPTICAL ELEMENTS - ACCELERATION STEADY STATE
EN 2591-615:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature
EN 2591-6403:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations
EN 4640-001:2009 Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
EN 2591-6404:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load
EN 4626-201 : 2009 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 201: Optical contact (sub-assembly) for receptacle - Product standard
EN 4626-202:2009 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 202: Optical contact assembly for 900 µm buffered fibre receptacle - Product standard
EN 2591-612:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression
EN 3745-301:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
BS EN 4626-201:2009 Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts Optical contact (sub-assembly) for receptacle. Product standard
10/30217640 DC : 0 BS EN 4701-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531 CONTACTS - PART 001: TECHNICAL SPECIFICATION
XP PREN 2591-611 : 1994 XP AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 611: OPTICAL ELEMENTS - EFFECTIVENESS OF CABLE ATTACHMENT - CABLE TORSION
PREN 4639-001 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
PREN 4626-202 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 202: OPTICAL CONTACT ASSEMBLY FOR 900 [MU]M BUFFERED FIBRE RECEPTACLE - PRODUCT STANDARD
I.S. EN 3733-005:2007 AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE 150 DEGREES C CONTINUOUS - PART 005: RECEPTACLE, CONNECTOR, TWO HOLE FIXING CABLE ACCORDING TO EN 4532, PRODUCT STANDARD
EN 4641-001:2009 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification
I.S. EN 4626-101:2008 AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREE C TO 125 DEGREE C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 101: OPTICAL CONTACT (SUB-ASSEMBLY) FOR PLUG - PRODUCT STANDARD
BS EN 4639-001:2007 Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification
BS EN 2591-6401:2001 Elements of electrical and optical connection. Test methods Optical elements. Acceleration steady state
BS EN 2591-610:2001 Elements of electrical and optical connection. Test methods Optical elements. Effectiveness of cable attachment. Cable pulling

PREN 2591-100 : 200P1 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.