• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 280:2013+A1:2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
Superseded date

26-02-2022

Published date

26-08-2015

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or measures
7 Information for use
Annex A (informative) - Use of MEWPs in wind speeds
        greater than 12,5 m/s (Beaufort-Scale)
Annex B (informative) - Dynamic factors in stability and
        structural calculations
Annex C (normative) - Calculation of wire rope drive
        systems
Annex D (informative) - Calculation example - Wire rope drive
        systems
Annex E (informative) - Calculation examples - factor 'z', kerb
        test
Annex F (normative) - Additional requirements for wireless
        controls and control systems
Annex G (normative) - Dimensions of steps and ladders
Annex H (informative) - Stress history parameters
Annex I (informative) - Fatigue assessment: Relationship between
        S classes in EN 13001-3-1 and B groups in DIN 15018
Annex J (normative) - Requirements for Performance Level
        d safety functions
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements
         of EU Directive 2006/42/EC
Bibliography

1.1This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis. NOTEMachines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.1.2This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.It does not cover the hazards arising from:a)use in potentially explosive atmospheres;b)electromagnetic incompatibility;c)work from the platform on external live electric systems;d)use of compressed gases for load bearing components;e)getting on and off the work platform at changing levels;f)specific applications (e.g. railway, ships) covered by National or local regulations.1.3This European Standard does not apply to:a)machinery serving fixed landings (see e.g. EN 81-1 and EN 81-2, EN 12159);b)fire-fighting and fire rescue appliances (see e.g. EN 1777);c)unguided work cages suspended from lifting appliances (see e.g. EN 1808);d)elevating operator position on rail dependent storage and retrieval equipment (see EN 528);e)tail lifts (see EN 1756-1 and EN 1756-2); f)mast climbing work platforms (see EN 1495);g)fairground equipment;h)lifting tables (see EN 1570);i)aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);j)elevating operator positions on industrial trucks (see EN 1726-2).1.4Classification:MEWPs are divided into two main groups:a)Group A:MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.b)Group B:All other MEWPs.Relating to travelling, MEWPs are divided into three types:1)Type 1Travelling is only allowed with the MEWP in its transport configuration;2)Type 2Travelling with raised work platform is controlled from a point of control at the chassis;3)Type 3Travelling with raised work platform is controlled from a point of control at the work platform.NOTEType 2 and type 3 can be combined.

DevelopmentNote
Supersedes PREN 280. (08/2013) 2013 Edition Re-Issued in August 2015 & incorporates AMD 1 2015. (09/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

DIN EN 15746-1:2016-02 (Draft) Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working; German and English version prEN 15746-1:2015
DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 12312-8:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
DIN EN 1459-3:2015-08 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: INTERFACE BETWEEN THE VARIABLE-REACH TRUCK AND THE WORK PLATFORM
07/30172830 DC : DRAFT DEC 2007 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 16228-2:2015 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
14/30258500 DC : 0 BS EN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
BS EN 1570-1 : 2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
DIN EN 1459-3 E : 2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: INTERFACE BETWEEN THE VARIABLE-REACH TRUCK AND THE WORK PLATFORM
14/30299187 DC : 0 BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16228-2:2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
I.S. EN 1570-1:2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
BS EN 15746-1 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
17/30364328 DC : 0 BS EN 1009-5 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY
15/30279805 DC : 0 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
I.S. EN 14010:2004
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
EN 16228-2:2014 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
DIN EN 14033-2:2017-10 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
BS EN 16228-2:2014 Drilling and foundation equipment. Safety Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
DIN EN 12312-8:2015-07 (Draft) AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
DIN EN 14033-2:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 1570-1:2015-01 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 14033-2:2017 Railway applications. Track. Railbound construction and maintenance machines Technical requirements for travelling and working
BS EN 12312-8 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
I.S. EN 14033-3:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
DIN EN 1777:2010-06 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
DIN EN 12312-6 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
DIN EN 14010:2009-12 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009)
BS EN 12312-6:2017 Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment
UNE-EN 1777:2011 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
I.S. EN 12312-6:2017 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT
I.S. EN 1777:2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
UNI EN 15746-1 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
VDI 4068 Blatt 1:2016-03 Competent persons - Qualification criteria and commissioning
VDI 4068 Blatt 6:2011-10 Competent persons - Mobile elevating work platforms
DIN EN 16228-2:2014-10 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
BS EN 1459-3:2015 Rough-terrain trucks. Safety requirements and verification Interface between the variable-reach truck and the work platform
BS EN 14033-3 : 2009 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
UNI EN 16228-2 : 2014 DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
NF EN 15746-1 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 1459-3:2015 ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: INTERFACE BETWEEN THE VARIABLE-REACH TRUCK AND THE WORK PLATFORM
DIN EN 12312-8 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 1777 : 2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 14010 : 2009 SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
PREN 1009-5 : DRAFT 2017 MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 5: SPECIFIC REQUIREMENTS FOR CLEANING, RECYCLING, SORTING AND MUD TREATMENT MACHINERY
09/30202538 DC : DRAFT JUN 2009 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
07/30172833 DC : DRAFT DEC 2007 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
12/30256919 DC : 0 BS EN 1459-3 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: ADDITIONAL REQUIREMENTS FOR VARIABLE REACH TRUCKS FITTED WITH ELEVATING WORK PLATFORM
UNE-EN 1459-3:2015 Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform
11/30236557 DC : 0 BS EN 16228-2 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
I.S. EN 14033-2:2017 RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
UNE-EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 15746-1:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
BS EN 14010 : 2003
EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 1459-3:2015 Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
08/30176091 DC : 0 BS EN 1808:1999/A1 - SAFETY REQUIREMENTS ON SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - TESTS
DIN EN 1570-1 E : 2015 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
DIN EN 14033-3:2014-08 (Draft) RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
14/30258503 DC : 0 BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
05/19988433 DC : 0 PREN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR WORKING
BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 12312-8:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms
DIN EN 15746-1:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working (includes Amendment A1:2011)
DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
UNE-EN 15746-1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
UNE-EN 15746-2:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
UNE-EN 1570-1:2012 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

ISO 2408:2017 Steel wire ropes — Requirements
EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
ISO 4302:2016 Cranes Wind load assessment
EN 1726-2:2000 Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
ISO 4301-4:1989 Cranes and related equipment — Classification — Part 4: Jib cranes
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 60068-2-64:2008 ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
ISO 4308-2:1988 Cranes and lifting appliances Selection of wire ropes Part 2: Mobile cranes Coefficient of utilization
EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements
EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 81-1:1998+A3:2009 Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
IEC 60068-2-64:2008 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 4305:2014 Mobile cranes Determination of stability
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 8087:1985 Mobile cranes Drum and sheave sizes
EN 81-2 : 1998 + A3 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
EN 14033-2:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working
EN 14033-1:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running
EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
BS 2573-2:1980 Rules for the design of cranes Specification for classification, stress calculations and design of mechanisms
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.