EN 3155-016:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
19-12-2019
23-08-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
4.1 Specific characteristic
4.2 Dimensions, mass
4.3 Marking
4.4 Material, surface treatment
4.5 Permissible cables
4.6 Tooling
4.7 Cable stripping
4.8 Tests
4.9 Gauges
5 Designation
6 Marking
7 Technical specification
This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The tests as applied in this standard do not permit the full qualification and shall be completed with associated components.
Committee |
ASD-STAN
|
DevelopmentNote |
To be used in conjunction with EN 3155-001. Supersedes PREN 3155-016 (10/2006)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
BS EN 3155-016:2006 | Identical |
SN EN 3155-016 : 2007 | Identical |
NBN EN 3155-016 : 2006 | Identical |
NF EN 3155-016 : 2007 | Identical |
PN EN 3155-016 : 2006 | Identical |
DIN EN 3155-016:2007-11 | Identical |
I.S. EN 3155-016:2007 | Identical |
NEN EN 3155-016 : 2006 | Identical |
NS EN 3155-016 : 1ED 2006 | Identical |
UNI EN 3155-016 : 2008 | Identical |
UNE-EN 3155-016:2006 | Identical |
PREN 4838-004 : DRAFT 2016 | AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A 115 V A.C. 400 HZ CONSTANT FREQUENCY - PART 004: WITH SIGNAL CONTACT - PRODUCT STANDARD |
PREN 3708-001 : 200P2 | AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION |
BS EN 3662-006:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Bus-bar version. Product standard |
BS EN 3708-002:2006 | Aerospace series. Modular interconnection systems. Terminal junction systems Performance specification |
XP PREN 3708-002 : 1997 XP | AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 002: PERFORMANCE SPECIFICATION |
PREN 4838-005 : DRAFT 2016 | AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A 115 V A.C. 400 HZ CONSTANT FREQUENCY - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
BS EN 4008-002:2006 | Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories List of product standards |
BS EN 3661-006:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Bus bar version. Product standard |
BS EN 2995-005:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A With polarized signal contact. Product standard |
BS EN 3662-005:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Product standard |
BS EN 2995-004:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A With signal contact. Product standard |
BS EN 3708-001:2006 | Aerospace series. Modular interconnection systems. Terminal junction systems Technical specification |
BS EN 2996-005:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A With polarized signal contact. Product standard |
BS EN 3661-005:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Product standard |
EN 3708-001 : 2006 | AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION |
EN 2996-005:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard |
EN 3708-002:2006 | Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification |
EN 2996-004:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard |
EN 3661-005:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard |
EN 3662-005:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard |
EN 3662-006:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard |
EN 4008-002:2006 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards |
EN 2995-005:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard |
EN 3661-006:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus bar version - Product standard |
EN 2995-004:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard |
PREN 4008-002 : 200P1 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - CRIMPING TOOLS AND ASSOCIATED ACCESSORIES - LIST OF PRODUCT STANDARDS |
PREN 3708-002 : 200P2 | AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 002: PERFORMANCE SPECIFICATION |
BS EN 2996-004:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A With signal contact. Product standard |
EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
EN 4008-008:2011 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard |
EN 2591-306 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 306: MOULD GROWTH |
EN 2591-301 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 301: ENDURANCE AT TEMPERATURE |
EN 2591-305 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 305: RAPID CHANGE OF TEMPERATURE |
EN 2591-319 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 319: GASTIGHTNESS OF SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-213 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 213: SHIELDING EFFECTIVENESS FROM 100 MHZ TO 1 GHZ |
EN 2591-418 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 418: GAUGE INSERTION/EXTRACTION FORCES (FEMALE CONTACTS) |
EN 2591-425 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 425: UNWRAPPING CAPABILITY, SOLDERLESS WRAPPED CONNECTIONS |
EN 4008-007:2011 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard |
EN 2591-502 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 502: RESTRICTED ENTRY |
EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
EN 2591-201 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 201: CONTACT RESISTANCE - LOW LEVEL |
EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
EN 2591-417 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 417: TENSILE STRENGTH (CRIMPED CONNECTION) |
EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
EN 2083 : 2001 | AEROSPACE SERIES - COPPER AND COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
EN 2591-424 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 424: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
EN 2591-406 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 406: MECHANICAL ENDURANCE |
NAS1749:1994 | CONTACT, ELECTRICAL, PIN |
EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
EN 2591-204 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 204: DISCONTINUITY OF CONTACTS IN THE MICROSECOND RANGE |
EN 2591-206 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 206: MEASUREMENTS OF INSULATION RESISTANCE |
EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
EN 2591-210 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 210: ELECTRICAL OVERLOAD |
MIL-DTL-22520 Revision G:1997 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
EN 2591-503 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 503: CONTACT DEFORMATION AFTER CRIMPING |
EN 2591-202 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 202: CONTACT RESISTANCE AT RATED CURRENT |
EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
EN 2591-207 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 207: VOLTAGE PROOF TEST |
EN 2591-416 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 416: CONTACT BENDING STRENGTH |
EN 2591-415 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 415: TEST PROBE DAMAGE (FEMALE CONTACTS) |
PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
MIL-I-81969 Revision B:1982 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.