EN 459-2:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Building lime - Part 2: Test methods
Superseded date
21-07-2021
Published date
08-09-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Sampling
4 General requirements for testing
5 Chemical analysis
6 Physical tests
Annex A (informative) - Example for the calculation of the
results on sieving
Annex B (informative) - Precision data for the test methods
Bibliography
This European Standard describes the test methods for all building limes covered by EN 459-1:2010.This European Standard specifies the methods used for the chemical analyses and the determination of physical properties of building limes.This document describes the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used.Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.
| Committee |
CEN/TC 51
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 459-2 : 2010 | Identical |
| PN EN 459-2 : 2010 | Identical |
| NEN EN 459-2 : 2010 | Identical |
| I.S. EN 459-2:2010 | Identical |
| SN EN 459-2 : 2010 | Identical |
| UNE-EN 459-2:2011 | Identical |
| NBN EN 459-2 : 2010 | Identical |
| BS EN 459-2:2010 | Identical |
| UNI EN 459-2 : 2010 | Identical |
| DIN EN 459-2:2010-12 | Identical |
| NF EN 459-2 : 2012 | Identical |
| NS EN 459-2 : 1ED 2010 | Identical |
| CEN/TR 16912:2016 | Guidelines for a procedure to support the European standardization of cements |
| 09/30205529 DC : 0 | BS EN 459-3 - BUILDING LIME - PART 3: CONFORMITY EVALUATION |
| I.S. EN 15368:2008 | HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| 14/30314735 DC : 0 | BS EN 12004-2 - ADHESIVES FOR TILES - PART 2: TEST METHODS |
| 07/30166977 DC : DRAFT AUG 2007 | BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| PD CR 13933:2000 | Masonry cement. Testing for workability (cohesivity) |
| I.S. EN 12002:2008 | ADHESIVES FOR TILES - DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS |
| PREN 13279-2 : DRAFT 2013 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| BS EN 12004-2:2017 | Adhesives for ceramic tiles Test methods |
| 14/30294810 DC : 0 | BS EN 14227-15 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
| PREN 13454-2 : DRAFT 2017 | BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
| BS EN 19694-5:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Lime industry |
| DIN EN 13282-2:2015-07 | HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| PREN 13282-1 : DRAFT 2010 | HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| BS EN 15368 : 2008 | HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| 17/30357424 DC : 0 | BS EN 13454-2 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
| UNE-EN 13892-3:2016 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
| BS EN 13279-2:2014 | Gypsum binders and gypsum plasters Test methods |
| I.S. EN 413-2:2016 | MASONRY CEMENT - PART 2: TEST METHODS |
| I.S. EN 13279-2:2014 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| EN 12002:2008 | Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts |
| DIN EN 13892-3:2015-03 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| EN 13279-2:2014 | Gypsum binders and gypsum plasters - Part 2: Test methods |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| EN 12485:2017 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods |
| ENV 13282:2000 | Hydraulic road binders - Composition, specifications and conformity criteria |
| 10/30200034 DC : 0 | BS EN 13282-1 - HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| ONORM EN 13454-2 : 2007 | BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
| NF EN 15368 : 2009 + A1 2010 | HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 08/30183116 DC : DRAFT AUG 2008 | BS EN 459-1 - BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| DIN EN 15368 E : 2010 | HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| DD ENV 459-1:1995 | Building lime Definitions, specifications and conformity criteria |
| UNE-EN 15368:2010 | Hydraulic binder for non-structural applications: definition, specifications and conformity criteria |
| DIN EN 13282-1:2013-06 | Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria |
| I.S. EN 13454-2:2004 | BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
| S.R. CEN/TR 16912:2016 | GUIDELINES FOR A PROCEDURE TO SUPPORT THE EUROPEAN STANDARDIZATION OF CEMENTS |
| BS EN 15814 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| I.S. EN 15814:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| S.R. CR 13933:2000 | MASONRY CEMENT - TESTING FOR WORKABILITY (COHESIVITY) |
| DIN EN 13279-2:2014-03 | Gypsum binders and gypsum plasters - Part 2: Test methods; German version EN 13279-2:2014 |
| DIN EN 14679:2005-07 | Execution of special geotechnical works - Deep mixing |
| DIN EN 12002:2009-01 | ADHESIVES FOR TILES - DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS |
| UNE-EN 12485:2010 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide and calcium magnesium carbonate - Test methods |
| BS EN 12485:2017 | Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime. Test methods |
| UNE-EN 13279-2:2014 | Gypsum binders and gypsum plasters - Part 2: Test methods |
| DIN EN 12485:2017-10 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
| I.S. EN 459-1:2015 | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| I.S. EN 12485:2017 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
| DIN EN 12878:1999-09 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN 459-3:2015 | BUILDING LIME - PART 3: CONFORMITY EVALUATION |
| DIN EN 14016-2:2004-04 | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods; German version EN 14016-2:2004 |
| I.S. EN 12878:2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN 13892-3:2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| I.S. EN 1744-1:2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| UNI EN 12878 : 2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN 14227-11:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 11: SOIL TREATED BY LIME |
| 14/30297859 DC : DRAFT AUG 2014 | BS EN 13892-3 - METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| DIN EN 13282-2 E : 2015 | HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| 13/30278741 DC : 0 | BS EN 13279-2 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| DIN EN 15814 E : 2015 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| 15/30328074 DC : 2015-12 | BS EN 16907-4 - EARTHWORKS - PART 4: SOIL TREATMENT WITH LIME AND/OR HYDRAULIC BINDERS |
| CR 13933:2000 | Masonry cement - Testing for workability (cohesivity) |
| DIN EN 12004-2:2015-02 (Draft) | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| DIN EN 12878:2014-07 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 1744-1:2013-03 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| DIN EN 459-3:2015-07 | BUILDING LIME - PART 3: CONFORMITY EVALUATION |
| DIN EN 459-1:2015-07 | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| BS EN 413-2:2016 | Masonry cement Test methods |
| UNE-EN 459-1:2016 | Building lime - Part 1: Definitions, specifications and conformity criteria |
| BS EN 459-3:2015 | Building lime Conformity evaluation |
| EN 13454-2:2003+A1:2007 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods |
| EN 13892-3:2014 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
| UNI EN 1744-1 : 2013 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| EN 413-2:2016 | Masonry cement - Part 2: Test methods |
| UNI EN 14679 : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| UNI EN 13279-2 : 2014 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 12002 : 2009 | ADHESIVES FOR TILES - DETERMINATION OF TRANSVERSE DEFORMATION FOR CEMENTITIOUS ADHESIVES AND GROUTS |
| I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| 14/30303607 DC : 0 | BS EN ISO 19694-5 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY |
| 15/30324378 DC : 0 | BS EN 12485 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE AND CALCIUM MAGNESIUM CARBONATE - TEST METHODS |
| PREN 12878 : DRAFT 2012 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 15368:2010-11 | Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria (includes Amendment A1:2010) |
| 03/312990 DC : DRAFT SEP 2003 | BS EN 413-2 - MASONRY CEMENT - PART 2: TEST METHODS |
| DIN EN 13282-1 E : 2013 | HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| UNE-EN 15814:2011 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| PREN 13043 : DRAFT 2015 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| BS EN 13454-2:2003 | Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate Test methods |
| I.S. EN 12004-2:2017 | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| PREN 459-3 : DRAFT 2009 | BUILDING LIME - PART 3: CONFORMITY EVALUATION |
| DIN EN 13454-2:2007-11 | BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
| I.S. EN 13282-2:2015 | HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| 15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNE-EN 13282-1:2013 | Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria |
| DIN EN 12485:2015-08 (Draft) | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
| DIN EN 14679 E : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS EN 459-1:2015 | Building lime Definitions, specifications and conformity criteria |
| UNE-EN 1744-1:2010 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| BS EN 14679:2005 | Execution of special geotechnical works. Deep mixing |
| BS EN 13892-3:2014 | Methods of test for screed materials Determination of wear resistance. Böhme |
| BS EN 12946:2000 | Liming materials. Determination of calcium content and magnesium content. Complexometric method |
| BS EN 14397-2:2004 | Fertilizers and liming materials. Determination of carbon dioxide Method for liming materials |
| EN 14679:2005/AC:2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| EN 15368:2008+A1:2010 | Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria |
| EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
| EN 14016-2 : 2004 | BINDERS FOR MAGNESITE SCREEDS - CAUSTIC MAGNESIA AND MAGNESIUM CHLORIDE - PART 2: TEST METHODS |
| EN 15814:2011+A2:2014 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| EN 19694-5:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 459-3:2015 | Building lime - Part 3: Conformity evaluation |
| EN 14227-11 : 2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 11: SOIL TREATED BY LIME |
| EN 14397-2:2004 | Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials |
| EN 459-1:2015 | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| 10/30200038 DC : 0 | BS EN 13282-2 - HYDRAULIC ROAD BINDERS - PART 2: NORMAL HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| PD CEN/TR 16912:2016 | Guidelines for a procedure to support the European standardization of cements |
| 12/30256100 DC : 0 | BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| 03/303958 DC : DRAFT APR 2003 | EN 14679 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| DIN EN 12004-2 E : 2017 | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| PREN 13892-3 : DRAFT 2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| BS EN 13282-1:2013 | Hydraulic road binders Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria |
| BS EN 13282-2:2015 | Hydraulic road binders Normal hardening hydraulic road binders. Composition, specifications and conformity criteria |
| DIN EN 15814:2015-03 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| UNI EN 13282-1 : 2013 | HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| I.S. EN 13282-1:2013 | HYDRAULIC ROAD BINDERS - PART 1: RAPID HARDENING HYDRAULIC ROAD BINDERS - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| UNE-EN 13282-2:2016 | Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria |
| I.S. EN 19694-5:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY |
| UNE-EN 12004-2:2017 | Adhesives for ceramic tiles - Part 2: Test methods |
| UNI EN 15368 : 2010 | HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
| PREN 12485 : DRAFT 2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS |
| DIN EN 14397-2:2004-09 | Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials |
| UNE-EN 459-3:2016 | Building lime - Part 3: Conformity evaluation |
| BS EN 14016-2:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride Test methods |
| BS EN 14227-11:2006 | Unbound and hydraulically bound mixtures. Specifications Soil treated by lime |
| BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| BS EN 12002:2008 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| DIN EN 12004-2:2017-05 | ADHESIVES FOR CERAMIC TILES - PART 2: TEST METHODS |
| EN 12946:2000 | Liming materials - Determination of calcium content and magnesium content - Complexometric method |
| EN 13282-2:2015 | Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria |
| EN 13282-1:2013 | Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria |
| EN 12004-2:2017 | Adhesives for ceramic tiles - Part 2: Test methods |
| DIN EN 14227-11:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 11: SOIL TREATED BY LIME |
| EN 196-7:2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 459-1:2015 | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| ISO 383:1976 | Laboratory glassware — Interchangeable conical ground joints |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.