EN 4700-005:2010
Current
Current
The latest, up-to-date edition.
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
Published date
01-09-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy forging stock. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4700-005. (04/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 4700-005 : 2010 | Identical |
| UNE-EN 4700-005:2010 | Identical |
| PN EN 4700-005 : 2010 | Identical |
| DIN EN 4700-005:2011-05 | Identical |
| NF EN 4700-005 : 2012 | Identical |
| I.S. EN 4700-005:2010 | Identical |
| SN EN 4700-005 : 2010 | Identical |
| UNI EN 4700-005 : 2011 | Identical |
| NBN EN 4700-005 : 2010 | Identical |
| BS EN 4700-005:2010 | Identical |
| NS EN 4700-005 : 1ED 2010 | Identical |
| UNI EN 2252 : 2013 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM |
| I.S. EN 2252:2012 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM |
| I.S. EN 4629:2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
| 11/30243867 DC : 0 | BS EN 4629 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 300 MM |
| BS EN 2252:2012 | Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forgings. De ≤ 100 mm |
| EN 2252:2012 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - 1 080 MPa ≤ Rm ≤ 1 250 MPa - Forgings - De ≤ 100 mm |
| BS EN 4670:2010 | Aerospace series. Steel FEPM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm |
| I.S. EN 4670:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| EN 4670:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 4629:2013 | Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De ≤ 300 mm |
| UNI EN 4672 : 2012 | AEROSPACE SERIES - STEEL FE-PM1504 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| UNI EN 4629 : 2013 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
| UNI EN 4670 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| BS EN 4629:2013 | Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ≤ 300 mm |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| PREN 2002-16 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| EN 2032-2 : 1994 | AEROSPACE SERIES - METALLIC MATERIALS - CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| SAE AMS 2750 : 2012 | PYROMETRY |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| PREN 3874 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 2032-1 : 2001 | AEROSPACE SERIES - METALLIC MATERIALS - PART 1: CONVENTIONAL DESIGNATION |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
| PREN 3987 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TESTING |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 2002-002 : 2005 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 2: TENSILE TESTING AT ELEVATED TEMPERATURE |
| SAE AMS 2315 : 2013 | DETERMINATION OF DELTA FERRITE CONTENT |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| EN 2002-005 : 2007 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 005: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| PREN 3988 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING |
| PREN 4050-4 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.