EN 54-25:2008/AC:2012
Current
Current
The latest, up-to-date edition.
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS
Published date
07-03-2012
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 System requirements
5 Components requirements
6 Documentation
7 Marking
8 Tests
Annex A (normative) - Test configuration by
using radio frequency shielded test
equipment
Annex B (normative) - Immunity to site attenuation
(path loss)
Annex C (informative) - Data and calculation of
the service life of the autonomous power
source(s)
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Directive (89/106/EEC)
Bibliography
Defines requirements, test methods and performance criteria for components used in fire alarms systems, installed in and around buildings, which use radio frequency links (RF links) to communicate.
| Committee |
CEN/TC 72
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 54-25 : 2008 COR 2012 | Identical |
| SN EN 54-25 : 2008 CORR 2012 | Identical |
| NEN EN 54-25 : 2008 C2 2012 | Identical |
| UNI EN 54-25 : 2008 | Identical |
| NS EN 54-25 : 2008 AC 2012 | Identical |
| DIN EN 54-25:2009-02 | Identical |
| I.S. EN 54-25:2008 | Identical |
| DIN EN 54-25 E : 2009 | Identical |
| BS EN 54-25:2008 | Identical |
| DIN EN 54-25:2015-10 (Draft) | Identical |
| PN EN 54-25 : 2011 AC 2012 | Identical |
| NF EN 54-25 : 2008 | Identical |
| UNE-EN 54-25:2009 | Identical |
| BS EN 54-13:2017 | Fire detection and fire alarm systems Compatibility and connectability assessment of system components |
| PREN 54-13 : DRAFT 2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
| 12/30254899 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| TR 102 649-2 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TECHNICAL CHARACTERISTICS OF SHORT RANGE DEVICES (SRD) AND RFID IN THE UHF BAND; SYSTEM REFERENCE DOCUMENT FOR RADIO FREQUENCY IDENTIFICATION (RFID) AND SRD EQUIPMENT; PART 2: ADDITIONAL SPECTRUM REQUIREMENTS FOR UHF RFID, NON-SPECIFIC SRDS AND SPECIFIC SRDS |
| EN 54-13:2017 | Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components |
| I.S. EN 54-13:2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
| 11/30249544 DC : 0 | BS EN 54-14 - FIRE DETECTION AND FIRE ALARM SYSTEMS - GUIDELINES FOR PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE |
| 14/30290848 DC : 0 | BS EN 54-13 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
| DIN EN 54-13:2014-09 (Draft) | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
| EN 303 131 : 1.1.0 DRAFT | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES; WIRELESS ALARMS WITH LOW DUTY CYCLE; HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| DIN EN 54-13 E : 2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 54-5:2017 | Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 54-18:2005/AC:2007 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: INPUT/OUTPUT DEVICES |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 54-2:1997/A1:2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| EN 300 113-1 : 1.7.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); LAND MOBILE SERVICE; RADIO EQUIPMENT INTENDED FOR THE TRANSMISSION OF DATA (AND/OR SPEECH) USING CONSTANT OR NON-CONSTANT ENVELOPE MODULATION AND HAVING AN ANTENNA CONNECTOR; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| EN 54-13:2017 | Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components |
| EN 54-4:1997/A2:2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT |
| EN 54-11:2001/A1:2005 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 11: MANUAL CALL POINTS |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.