• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60068-2-11:1999

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Environmental testing - Part 2: Tests - Test Ka: Salt mist
Superseded date

06-05-2021

Published date

15-04-1999

Compares resistance to deterioration from salt mist between specimens of similar construction. May be used to evaluate the quality and the uniformity of protective coatings.

Committee
CLC/SR 104
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy
Supersedes

CEI EN 60749-13 : 2004 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 13: SALT ATMOSPHERE
09/30199512 DC : DRAFT FEB 2009 BS EN 2591-307 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST
BS EN 61869-1:2009 Instrument transformers General requirements
BS EN 61757-1:2012 Fibre optic sensors Generic specification
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
BS EN 60335-2-71:2003 Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
BS EN 61169-8:2007 Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
BS EN 62271-203:2012 High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
I.S. EN 61757-1:2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
S.R. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
I.S. EN 61810-7:2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
I.S. EN 61394:2011 OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS (IEC 61394:2011)
BS EN 50539-11 : 2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN IEC 60099-8:2018 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
CEI EN 50326 : 2003 CONDUCTORS FOR OVERHEAD LINES - CHARACTERISTICS OF GREASES
BS EN 60335-2-24:2010+A2:2019 Household and similar electrical appliances. Safety Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
UNE-EN 60099-4:2016 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
I.S. EN 62246-1-1:2013 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT (IEC 62246-1-1:2013 (EQV))
I.S. EN 60749-13:2002 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 13: SALT ATMOSPHERE
EN 60950-22:2017 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
UNE-EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
UNE-EN 50290-4-1:2016 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
BS EN 15183:2006 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
UNE-EN 62271-203:2013 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
IEC 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
I.S. EN 2591-307:2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST
EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
EN 61300-2-26:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
EN 62246-1:2015 Reed switches - Part 1: Generic specification
EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
CEN/TS 15213-6:2011 Road transport and traffic telematics - After-theft services for the recovery of stolen vehicles - Part 6: Test procedures
EN 50539-11 : 2013 AMD 1 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
EN 60738-1:2006/A1:2009 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
I.S. EN IEC 60099-8:2018 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
BS EN 50483-6:2009 Test requirements for low voltage aerial bundled cable accessories Environmental testing
BS EN 60738-1 : 2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
EN 303 980 : 1.1.1 SATELLITE EARTH STATIONS AND SYSTEMS (SES); HARMONISED STANDARD FOR FIXED AND IN-MOTION EARTH STATIONS COMMUNICATING WITH NON-GEOSTATIONARY SATELLITE SYSTEMS (NEST) IN THE 11 GHZ TO 14 GHZ FREQUENCY BANDS COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU
CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
CEI EN 61394 : 2012 OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS
CEI EN 61300-2-26 : 2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
BS EN IEC 62246-1-1:2018 Reed switches Generic specification. Blank detail specification
BS EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
BS EN 60512-11-6:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11f. Corrosion, salt mist
BS EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
CEI EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
EN 50470-1:2006 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
I.S. EN 60099-9:2014 SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
I.S. EN 50539-11:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
I.S. EN 50326:2002 CONDUCTORS FOR OVERHEAD LINES - CHARACTERISTICS OF GREASES
I.S. EN 60512-11-6:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-6: CLIMATIC TESTS - TEST 11F: CORROSION, SALT MIST
CEI EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
DIN EN 12645:2015-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
DIN EN 15183 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
EN 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
EN 60947-5-5 : 1997 AMD 2 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
I.S. EN 12645:2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
PREN 50290-4-1 : DRAFT 2013 COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS
UNI CEN/TS 15213-6 : 2011 ROAD TRANSPORT AND TRAFFIC TELEMATICS - AFTER-THEFT SERVICES FOR THE RECOVERY OF STOLEN VEHICLES - PART 6: TEST PROCEDURES
BS EN 60749-13:2002 Semiconductor devices. Mechanical and climatic test methods Salt atmosphere
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
BS EN 61300-2-26:2007 Fibre optic interconnecting devices and passive Components. Basic test and measurement procedures Tests. Salt mist
BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
BS EN 60099-8:2011 Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
BS EN 50463:2007 Railway applications. Energy measurement on board trains
05/30131376 DC : DRAFT MAR 2005 BS EN 15183 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
BS EN 62246-1-1:2013 Reed switches Generic specification. Quality assessment
CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
BS EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) Methods of test
BS EN 61243-5:2001 Live working. Voltage detectors Voltage detecting systems (VDS)
BS EN 50326:2002 Conductors for overhead lines. Characteristics of greases
BS EN 50290-4-1:2014 Communication cables General considerations for the use of cables. Environmental conditions and safety aspects
PREN 2591-307 : 200P2 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST
UNE-EN 62208:2012 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
CEI EN 50470-1 : 2007 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
I.S. EN 61869-1:2009 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
I.S. EN 50470-1:2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 60947-5-5:1998 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
I.S. EN 50483-6:2009 TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING
I.S. EN 61230:2008 LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING
I.S. EN 62271-203:2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-203:2011 (EQV))
I.S. EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
S.R. CEN/TS 16244:2018 VENTILATION IN HOSPITALS - COHERENT HIERARCHIC STRUCTURE AND COMMON TERMS AND DEFINITIONS FOR A STANDARD RELATED TO VENTILATION IN HOSPITALS
EN IEC 62246-1-1:2018 Reed switches - Part 1-1: Generic specification - Blank detail specification
CEI EN 61086-2 : 2005 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
I.S. EN 60099-4:2014 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
I.S. EN 50463:2007 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS
I.S. EN 50300:2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
I.S. EN 50290-4-1:2014 COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
UNE-EN 50491-2:2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
UNE-EN 61869-1:2010 Instrument transformers -- Part 1: General requirements
UNE-EN 60335-2-24:2011 Household and similar electrical appliances - Safety -- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
UNI EN 12645 : 2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
UNI EN 2591-307 : 2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 307: SALT MIST
BS EN 50300:2004 Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards
DD CEN/TS 15213-6:2011 Road transport and traffic telematics. After-theft services for the recovery of stolen vehicles Test procedures
BS EN 61230:2008 Live working. Portable equipment for earthing or earthing and short-circuiting
BS EN 61394:2011 Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
CEI EN 60966-1 : 2001 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS
BS EN 60099-9:2014 Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations
BS EN 61810-7:2006 Electromechanical elementary relays Test and measurement procedures
TS 102 566 : 1.1.1 ACCESS TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); COMMON REQUIREMENTS FOR AUTOMATED DISTRIBUTION FRAMES (ADF) AT STREET CABINET
BS EN 60950-22:2017 Information technology equipment. Safety Equipment to be installed outdoors
BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. HD 60364-5-51:2009 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD))
I.S. EN IEC 62246-1-1:2018 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - BLANK DETAIL SPECIFICATION
BS EN 50470-1 : 2006 ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C)
I.S. EN 60099-8:2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
I.S. EN 60950-22:2017 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
BS EN 61587-1:2017 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
CEI EN 62246-1-1 : 2014 REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - QUALITY ASSESSMENT
I.S. EN 62246-1:2015 REED SWITCHES - PART 1: GENERIC SPECIFICATION
CEI EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
I.S. EN 60738-1:2006 THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
I.S. EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
I.S. EN 60335-2-71:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
I.S. EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
I.S. EN 61169-1:2013 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 2591-307:2012 Aerospace series. Elements of electrical and optical connection. Test methods Salt mist
EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
UNE-HD 60364-5-51:2010 Electrical installations of buildings -- Part 5-51: Selection and erection of electrical equipment - Common rules
BS EN 50491-2 : 2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
EN 2591-307:2012 Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist
EN 15183:2006 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
EN 61587-1:2017 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
I.S. EN 50491-2:2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
CEI EN 62271-203 : 2013 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV
CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 60966-1:1999 Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods
BS EN 62246-1:2015 Reed switches Generic specification
13/30268917 DC : 0 BS EN 50290-4-1 ED.2 PREN 50290-4-1 ED.2 - COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS
CEI EN 62052-11 : 2003 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT
CEI EN 60539-1 : 2009 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
CEI EN 50483-6 : 2011 TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING
CEI EN 61869-1 : 2010 INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
CEI EN 60335-2-24 : 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
CEN/TS 16244:2018 Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
UNE-EN 61230:2011 Live working - Portable equipment for earthing or earthing and short-circuiting
CEI EN 60099-9 : 2015 SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
CEI EN 60512-11-6 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 11-6: CLIMATIC TESTS TEST 11F: CORROSION, SALT MIST
BS EN 62052-11 : 2003 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003)
BS EN 60099-4:2014 Surge arresters Metal-oxide surge arresters without gaps for a.c. systems
I.S. EN 60335-2-24:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE MAKERS
S.R. CEN/TS 15213-6:2011 ROAD TRANSPORT AND TRAFFIC TELEMATICS - AFTER-THEFT SERVICES FOR THE RECOVERY OF STOLEN VEHICLES - PART 6: TEST PROCEDURES
PD CEN/TS 16244:2018 Ventilation in hospitals. Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
NF EN 50491-2 : 2011 AMD 1 2017 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
CEI EN 60099-8 : 2012 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
I.S. EN 61300-2-26:2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-26: TESTS - SALT MIST
UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
EN 60335-2-71 : 2003 AMD 1 2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
EN 61169-8:2007 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)
EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects
EN 61757-1 : 2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012)
EN 61394:2011 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
EN 61869-1:2009 Instrument transformers - Part 1: General requirements
EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
EN 62052-11:2003/A1:2017/AC:2018-04 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018)
EN 62246-1-1:2013 Reed switches - Part 1-1: Generic specification - Quality assessment
EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
EN 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
EN 62271-203:2012 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
EN 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
EN 50491-2 : 2010 AMD 1 2015 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
EN 50463:2007 Railway applications - Energy measurement on board trains
DIN EN 15183:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
EN 50326 : 2002 Conductors for overhead lines - Characteristics of greases
EN 50483-6:2009 Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing
EN 50300:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards
EN 60749-13:2002 Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.