• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60143-1:2015/AC:2017-05

Current
Current

The latest, up-to-date edition.

Series capacitors for power systems - Part 1: General
Amendment of

EN 60143-1:2015

Published date

12-05-2017

FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Service conditions
5 Quality requirements and tests
6 Insulation level
7 Overloads, overvoltages and duty cycles
8 Safety requirements
9 Markings and instruction books
10 Guide for selection of ratings, installation and operation
Annex A (normative) - Test requirements and application
        guide for external fuses and units to be externally fused
Annex B (informative) - Economic evaluation of series
        capacitor bank losses
Annex C (informative) - Capacitor bank fusing and unit
        arrangement
Annex D (informative) - Examples of typical connection
        diagrams for large series capacitor installations for
        transmission lines
Annex E (informative) - Precautions to be taken to avoid
        pollution of the environment by polychlorinated
        biphenyls
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Committee
SR 33
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

BS EN 60143-4:2010 Series capacitors for power systems Thyristors controlled series capacitors
BS EN 60143-3:2015 Series capacitors for power systems Internal fuses
I.S. EN 60143-4:2010 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
BS EN 60519-11:2007 Safety in electroheat installations Particular requirements for installations using the effect of electromagnetic forces on liquid metals
EN 62271-109:2009/A1:2013 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013)
CEI EN 60143-4 : 2012 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
I.S. EN 60143-2:2013 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV))
BS EN 60143-2:2013 Series capacitors for power systems Protective equipment for series capacitor banks
CEI EN 60143-2 : 2014 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS
I.S. EN 60519-3:2005 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
BS EN 60519-3:2005 Safety in electroheat installations Particular requirements for induction and conduction heating and induction melting installations
BS EN 60099-9:2014 Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations
BS EN 62271-109 : 2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES
I.S. EN 60519-11:2007 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS
I.S. EN 60143-3:2015 SERIES CAPACITORS FOR POWER SYSTEMS - PART 3: INTERNAL FUSES
I.S. EN 62271-109:2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV))
EN 60143-3:2015 Series capacitors for power systems - Part 3: Internal fuses
EN 60519-3:2005 Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
EN 60143-4 : 2010 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
EN 60519-11:2007 Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
IEC 60143-2:2012 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
EN 61048:2006/A1:2016 AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015)
IEC 61048:2006+AMD1:2015 CSV Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
IEC TS 60815-2:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems
EN 60143-3:2015 Series capacitors for power systems - Part 3: Internal fuses
EN 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
EN 60549:2013 High-voltage fuses for the external protection of shunt capacitors
IEC 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 60252-1 : 2011 AMD 1 2013 AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010/A1:2013)
IEC 60549:2013 High-voltage fuses for the external protection of shunt capacitors
EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
IEC TR 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
IEC 61049:1991 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
EN 61049:1993 Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements
EN 61071:2007 Capacitors for power electronics
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60721-2-6:1990 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
IEC 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
EN 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 60071-1:2006/A1:2010 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEC 60252-1:2010+AMD1:2013 CSV AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation
IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
IEC 60050-436:1990 International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors
EN 60071-2:1997 Insulation co-ordination - Part 2: Application guide
EN 60110-1:1998 Power capacitors for induction heating installations - Part 1: General
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
EN 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
IEC 60143-3:2015 Series capacitors for power systems - Part 3: Internal fuses
IEC TS 60815-1:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
IEC 60143-4:2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors
EN 60143-4 : 2010 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
IEEE 693-2005 IEEE Recommended Practice for Seismic Design of Substations
IEC TS 60815-3:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
IEC 60110-1:1998 Power capacitors for induction heating installations - Part 1: General

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.