• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60255-1:2010

Current
Current

The latest, up-to-date edition.

Measuring relays and protection equipment - Part 1: Common requirements
Published date

22-01-2010

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Environmental conditions
5 Ratings
6 Design and construction
7 Tests
8 Marking, labelling and packaging
9 Rules for transport, storage, installation, operation and
   maintenance
10 Product documentation
Annex A (informative) Type testing guidelines
Annex B (informative) Intrinsic, operating and overall system
        accuracy
Annex C (informative) Guidance on dependability
Bibliography
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications

IEC 60255-1:2009 specifies common rules and requirements applicable to measuring relays and protection equipment including any combination of devices to form schemes for power system protection such as control, monitoring and process interface equipment in order to obtain uniformity of requirements and tests. Covers all measuring relays and protection equipment used for protection within the power system environment.

Committee
CLC/TC 95X
DevelopmentNote
Supersedes EN 60255-6. (02/2010)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

15/30314789 DC : 0 BS EN 50152-3-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-1: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - DEVICES
I.S. EN 60255-127:2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 127: FUNCTIONAL REQUIREMENTS FOR OVER/UNDER VOLTAGE PROTECTION
PREN 50152-3-1 : DRAFT 2015 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-1: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - DEVICES
BS EN 60255-121:2014 Measuring relays and protection equipment Functional requirements for distance protection
BS EN 60255-26:2013 Measuring relays and protection equipment Electromagnetic compatibility requirements
BS EN 60255-27:2014 Measuring relays and protection equipment Product safety requirements
I.S. EN 60255-149:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 149: FUNCTIONAL REQUIREMENTS FOR THERMAL ELECTRICAL RELAYS (IEC 60255-149:2013 (EQV))
EN 60255-121:2014 Measuring relays and protection equipment - Part 121: Functional requirements for distance protection
EN 60255-127:2014 Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection
EN 60255-149:2013 Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays
EN 60255-27:2014 Measuring relays and protection equipment - Part 27: Product safety requirements
EN 50152-3-1:2017 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices
BS EN 60255-151:2009 Measuring relays and protection equipment Functional requirements for over/under current protection
CEI EN 60255-151 : 2011 RELAIS DE MESURE ET DISPOSITIFS DE PROTECTION - PARTIE 151: EXIGENCES FONCTIONNELLES POUR LES PROTECTIONS A MAXIMUM ET MINIMUM DE COURANT
I.S. EN 60255-121:2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 121: FUNCTIONAL REQUIREMENTS FOR DISTANCE PROTECTION
I.S. EN 60255-27:2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
CEI EN 60255-121 : 2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 121: FUNCTIONAL REQUIREMENTS FOR DISTANCE PROTECTION
BS EN 60255-127:2014 Measuring relays and protection equipment Functional requirements for over/under voltage protection
CEI EN 60255-27 : 2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
UNE-EN 50152-3-1:2017 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices
EN 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
BS EN 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
I.S. EN 50152-3-1:2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-1: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - DEVICES
I.S. EN 62689-1:2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
I.S. EN 60255-151:2009 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 151: FUNCTIONAL REQUIREMENTS FOR OVER/UNDER CURRENT PROTECTION
UNE-EN 60255-1:2010 Measuring relays and protection equipment -- Part 1: Common requirements
BS EN 60255-149:2013 Measuring relays and protection equipment Functional requirements for thermal electrical relays
12/30270909 DC : 0 BS EN 50438 - REQUIREMENTS FOR THE CONNECTION OF MICRO-GENERATORS IN PARALLEL WITH PUBLIC LOW VOLTAGE DISTRIBUTION NETWORKS
CEI EN 60255-149 : 2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 149: FUNCTIONAL REQUIREMENTS FOR THERMAL ELECTRICAL RELAYS
I.S. EN 60255-26:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (IEC 60255-26:2013 (EQV))
BS EN 50152-3-1:2017 Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Devices
PREN 50438 : DRAFT 2012 REQUIREMENTS FOR THE CONNECTION OF MICRO-GENERATORS IN PARALLEL WITH PUBLIC LOW VOLTAGE DISTRIBUTION NETWORKS
EN 60255-151:2009 Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection
EN 60255-26:2013/AC:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS

IEC 60255-21-2:1988 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests
EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
EN 60044-2:1999/A2:2003 INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS
IEC 60297-3-101:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
IEC 60255-25:2000 Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment
IEC 60044-7:1999 Instrument transformers - Part 7: Electronic voltage transformers
EN 60255-27:2014 Measuring relays and protection equipment - Part 27: Product safety requirements
EN 60255-22-7:2003 Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests
EN 60255-26:2013/AC:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS
IEC 60044-5:2004 Instrument transformers - Part 5: Capacitor voltage transformers
IEC 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
IEEE C37.118-2005 IEEE Standard for Synchrophasors for Power Systems
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60255-21-3:1993 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60688:2012 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
EN 60044-5:2004 Instrument transformers - Part 5: Capacitor voltage transformers
IEC 60044-2:1997+AMD1:2000+AMD2:2002 CSV Instrument transformers - Part 2 : Inductive voltage transformers
EN 60255-11:2010 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
IEC 60255-11:2008 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
EN 60297-3-101:2004 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units
IEC 61810-1:2015 Electromechanical elementary relays - Part 1: General and safety requirements
EN 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
EN 60255-22-5:2011 Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test
IEC 60255-22-5:2008 Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test
IEC 60050-447:2010 International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays
EN 60255-22-2:2008 Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests
EN 60044-8:2002 Instrument transformers - Part 8: Electronic current transformers
IEC 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
EN 60044-7:2000 Instrument transformers - Part 7: Electronic voltage transformers
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV Instrument transformers - Part 1: Current transformers
IEC 61850-9-2:2011 Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
IEC 60255-27:2013 Measuring relays and protection equipment - Part 27: Product safety requirements
IEC 60300-1:2014 Dependability management - Part 1: Guidance for management and application
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60255-5:2000 Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests
IEC 60255-22-2:2008 Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests
ISO/IEC 17799:2005 Information technology Security techniques Code of practice for information security management
IEC 60255-21-1:1988 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)
EN 60255-22-4:2008 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 22-4: ELECTRICAL DISTURBANCE TESTS - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60255-21-1:1995 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal)
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
EN 60044-1:1999/A2:2003 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
EN 60068-3-4:2002 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60255-26:2013 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements
IEC 60050-448:1995 International Electrotechnical Vocabulary (IEV) - Part 448: Power system protection
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60255-21-2:1995 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests
EN 61850-9-2:2011 Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60255-21-3:1995 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
IEC 60255-22-7:2003 Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests
EN 60255-25:2000 Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment
IEC 60255-22-4:2008 Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test
EN 60721-3-3 : 95 AMD 2 97 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.