• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60422:2013

Current
Current

The latest, up-to-date edition.

Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
Published date

03-05-2013

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Properties and deterioration/degradation of oil
5 Oil tests and their significance
6 Sampling of oil from equipment
7 Categories of equipment
8 Evaluation of mineral insulating oil in
   new equipment
9 Evaluation of oil in service
10 Handling and storage
11 Treatment
12 Replacement of oil in electrical equipment
13 Passivation
Annex A (informative) - Evaluating water in oil and
        insulation
Annex B (informative) - Particles
Annex C (informative) - Test method for determination
        of sediment and sludge
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

IEC 60422:2013 gives guidance on the supervision and maintenance of the quality of the insulating oil in electrical equipment.

Committee
SR 10
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

BS EN 60970:2007 Insulating liquids. Methods for counting and sizing particles
S.R. CLC/TR 50503:2010 GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
I.S. EN 60137:2017 INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V
EN 60137:2017 Insulated bushings for alternating voltages above 1 000 V
EN 62701:2014 Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears
CEI EN 50299-2 : 2016 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
BS EN 60137:2017 Insulated bushings for alternating voltages above 1000 V
I.S. EN IEC 61125:2018 INSULATING LIQUIDS - TEST METHODS FOR OXIDATION STABILITY - TEST METHOD FOR EVALUATING THE OXIDATION STABILITY OF INSULATING LIQUIDS IN THE DELIVERED STATE
UNE-EN 50299-2:2015 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations
BS EN 50299-2:2014 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Dry-type cable terminations
BS EN 60296:2012 Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
I.S. EN 62701:2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - RECYCLED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEARS
I.S. EN 60970:2007/AC:2008 INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES
CEI EN 60296 : 2013 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN IEC 61125:2018 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
BS EN 61869-5:2011 Instrument transformers Additional requirements for capacitor voltage transformers
I.S. EN 50299-2:2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
UNE-EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 60970:2007/corrigendum:2008 INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES
BS EN IEC 61125:2018 Insulating liquids. Test methods for oxidation stability. Test method for evaluating the oxidation stability of insulating liquids in the delivered state
13/30281716 DC : 0 BS EN 50299-2 - OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT U[M] FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
CLC/TR 50503 : 2010 Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs
I.S. EN 60296:2012 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012 (EQV))
EN 50299-2:2014 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations
EN 61869-5:2011 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers

ISO 4793:1980 Laboratory sintered (fritted) filters — Porosity grading, classification and designation
ISO 3016:1994 Petroleum products Determination of pour point
ISO 2719:2016 Determination of flash point Pensky-Martens closed cup method
EN 60156:1995 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
IEC 62021-1:2003 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration
IEC 62021-2:2007 Insulating liquids - Determination of acidity - Part 2: Colourimetric titration
IEC 61125:1992 Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
EN ISO 3104:1996 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
IEC 60156:1995 Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
BS 6522:1984 Methods for determination of percentage water saturation of insulating oil
EN 61125:1993/A1:2004 UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
IEC 60599:2015 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
EN 14210 : 2003 SURFACE ACTIVE AGENTS - DETERMINATION OF INTERFACIAL TENSION OF SOLUTIONS OF SURFACE ACTIVE AGENTS BY THE STIRRUP OR RING METHOD
EN 61619:1997 Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
ISO 6247:1998 Petroleum products — Determination of foaming characteristics of lubricating oils
IEC 62535:2008 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
IEC 60475:2011 Method of sampling insulating liquids
IEC 60567:2011 Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN 60814:1997 Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
EN 62021-2 : 2007 INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION
EN 62535:2009 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
ASTM D 1275 : 2015 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
EN 60970:2007/corrigendum:2008 INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES
EN 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
ISO 12185:1996 Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
IEC 60970:2007 Insulating liquids - Methods for counting and sizing particles
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
IEC 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
IEC 60666:2010 Detection and determination of specified additives in mineral insulating oils
IEC 60814:1997 Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
IEC 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
ISO 2049:1996 Petroleum products Determination of colour (ASTM scale)
IEC 61619:1997 Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
IEC 61198:1993 Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
EN 62021-1:2003 Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration
IEEE C57.106-2006 IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
ISO 4407:2002 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
EN 60475 : 2011 Method of sampling insulating liquids
ISO Guide 73:2009 Risk management — Vocabulary
EN 60666 : 2010 DETECTION AND DETERMINATION OF SPECIFIED ADDITIVES IN MINERAL INSULATING OILS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.