• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60432-3:2013

Current
Current

The latest, up-to-date edition.

Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
Published date

18-01-2013

FOREWORD
1 General
2 Requirements
3 Assessment
Annex A (normative) - Symbols
Annex B (normative) - Method of testing the
        gas-pressure
Annex C (informative) - Information for luminaire
        design
Annex D (normative) - Conditions of compliance
        for design tests
Annex E (informative) - Bulb wall temperature
        measurement
Annex F (normative) - Induced failure test
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

IEC 60432-3:2012 specifies the safety requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: - projection (including cinematograph and still projection), - photographic (including studio), - floodlighting, - special purpose, - general purpose, - stage lighting. This second edition of IEC 60432-3 cancels and replaces the first edition published in 2002, Amendment 1 (2005) and Amendment 2 (2008). The main changes with respect to the previous edition are as follows: - adapting the cold fill pressure requirements and tests for self-shielded lamps to the state of the technology, - introduction of requirements to fully cover photobiological safety according to IEC 62471.

DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

EN IEC 60079-7:2015/A1:2018 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
EN 62838:2016/AC:2017-11 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
BS EN 60630 : 1999 MAXIMUM LAMP OUTLINERS FOR INCANDESCENT LAMPS
CEI 34-119 : 2010 GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES
I.S. EN 62838:2016 LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS
BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
I.S. EN 60630:2000 MAXIMUM LAMP OUTLINES FOR INCANDESCENT LAMPS
BS EN 60357 : 2003 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS (IEC 60357:2002, MODIFIED)
I.S. EN 60598-1:2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 60598-1:2015/A1:2018 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 60598-1:2015 Luminaires General requirements and tests
15/30333848 DC : 0 BS EN 60357:2003/PRAA:2015 - TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
UNE-EN 60598-1:2015 Luminaires - Part 1: General requirements and tests
I.S. EN 60357:2003 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
BS EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. Safety specifications
UNE-EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications
I.S. EN 60079-7:2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
UNE-EN 60079-7:2016 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60630:1998/A7:2015 MAXIMUM LAMP OUTLINES FOR INCANDESCENT LAMPS (IEC 60630:1994/A7:2014, MODIFIED)
EN 60357:2003/A11:2016 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS

IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60061-3:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60682:1980 Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60838-1:2016+AMD1:2017 CSV Miscellaneous lampholders - Part 1: General requirements and tests
IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
IEC 60050-845:1987 International Electrotechnical Vocabulary (IEV) - Part 845: Lighting
IEC 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
EN 60357:2003/A11:2016 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
IEC 60269-3:2010+AMD1:2013 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
IEC 60061-4:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 62471:2006 Photobiological safety of lamps and lamp systems
IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
EN 60432-1:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011)
EN 62471:2008 Photobiological safety of lamps and lamp systems
IEC 60335-2-56:2002+AMD1:2008+AMD2:2014 CSV Household and similar electrical appliances - Safety - Part 2-56:Particular requirements for projectors and similar appliances

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.