• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60664-4:2006/corrigendum:2006

Current
Current

The latest, up-to-date edition.

INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS
Published date

30-10-2006

FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms and definitions
4 Clearances
  4.1 General conditions
  4.2 Basic information
  4.3 Homogeneous and approximately homogeneous fields
      4.3.1 Conditions for approximately homogeneous field
      4.3.2 Experimental data of breakdown characteristics
      4.3.3 Dimensioning of clearances for homogeneous and
            approximately homogeneous field conditions
  4.4 Inhomogeneous fields
      4.4.1 Conditions for inhomogeneous field
      4.4.2 Experimental data of partial discharge and
            breakdown characteristics
      4.4.3 Dimensioning of clearances for inhomogeneous
            field conditions
5 Creepage distances
  5.1 Experimental data
  5.2 Dimensioning of creepage distances
6 Solid insulation
  6.1 General consideration
  6.2 Influencing factors
  6.3 Dimensioning of solid insulation
7 High-frequency testing
  7.1 Basic requirements
  7.2 Test voltage source
  7.3 Conditioning
  7.4 High-frequency breakdown test
      7.4.1 Test method
      7.4.2 Test result
  7.5 High-frequency partial discharge test
      7.5.1 General considerations
      7.5.2 Test method
      7.5.3 Test equipment
      7.5.4 Test circuit
      7.5.5 Required bandwidth of the test circuit
      7.5.6 Dimensioning of the test circuit
  7.6 Examples of test results
8 Non sinusoidal voltages
  8.1 General considerations
  8.2 Periodic impulse voltage
  8.3 Harmonic analysis
  8.4 Dimensioning procedure and testing
Annex A (informative) Insulation characteristics of clearances
        at high-frequency voltages
Annex B (informative) Insulation characteristics of creepage
        distances at high-frequency voltages
Annex C (informative) Insulation characteristics of solid insulation
        at high-frequency voltages
Annex D (normative) Testing of insulation at high-frequency voltages
Annex E (informative) Insulation stressed with non-sinusoidal
        high-frequency voltages
Annex F (informative) Dimensioning diagrams
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Bibliography

Deals with basic, supplementary and reinforced insulation subjected to high-frequency voltage stress within low-voltage equipment.

Committee
SR 109
DevelopmentNote
To be used in conjunction with EN 60664-1 or EN 60664-5. (02/2006)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

I.S. EN 61810-1:2015 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 62109-1:2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61347-1:2015 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
BS EN 61347-1:2015 Lamp controlgear General and safety requirements
BS EN 62477-1 : 2012 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
EN 61347-1:2015 Lamp controlgear - Part 1: General and safety requirements
EN 61800-5-1:2007/A1:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016)
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 61558-2-16:2009/A1:2013 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013)
BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
CEI EN 60664-1 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
I.S. EN 62477-1:2012 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL
I.S. EN 80601-2-60:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
CEI EN 61810-1 : 2016 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 61558-2-16:2009 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
I.S. EN 61800-5-1:2007 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY
BS EN 61810-1:2015 Electromechanical elementary relays General and safety requirements
BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
UNE-EN 61347-1:2016 Lamp controlgear - Part 1: General and safety requirements
UNE-EN 62109-1:2011 Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
BS EN 61800-5-1:2007 Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
BS EN 80601-2-60:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of dental equipment
CEI EN 61347-1 : 2016 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
I.S. EN 60598-1:2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 61810-1:2015/AC:2018-04 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018)
I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 61558-2-16 : 2009 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems General requirements
EN 80601-2-60:2015 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
UNE-EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements
EN 60598-1:2015/A1:2018 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 62477-1:2012/A1:2017 SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016)
EN 62109-1 : 2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS

IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
EN 60112 : 2003 AMD 1 2009 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
ISO 7864:2016 Sterile hypodermic needles for single use — Requirements and test methods
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
EN 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.