EN 60794-5-20 : 2014
Current
Current
The latest, up-to-date edition.
Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
Published date
16-05-2014
FOREWORD
1 Scope
2 Normative references
3 Symbols
4 General requirements
5 Microduct fibre unit
6 Microduct
7 Protected microducts
Annex A (informative) - Examples of microduct
fibre units, microducts, and protected
microducts
Annex B (informative) - Product descriptions (blank
detail specification and minimum
requirements)
Annex C (normative) - Product constructions
Annex D (normative) - Transmission requirements
Annex E (normative) - IEC 60794-1-21 Method Exx
- Microduct inner clearance test
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
IEC 60794-5-20:2014(E) is a family specification that covers outdoor microduct fibre units and corresponding microducts and protected microducts for installation by blowing.
| Committee |
TC 86A
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| IEC 60794-5-20:2014 | Identical |
| NBN EN 60794-5-20 : 2014 | Identical |
| NEN EN IEC 60794-5-20 : 2014 | Identical |
| I.S. EN 60794-5-20:2014 | Identical |
| PN EN 60794-5-20 : 2014 | Identical |
| VDE 0888-520 : 2015 | Identical |
| DIN EN 60794-5-20 : 2015 | Identical |
| UNE-EN 60794-5-20:2014 | Identical |
| SN EN 60794-5-20:2014 | Identical |
| BS EN 60794-5-20:2014 | Identical |
| CEI EN 60794-5-20 : 2014 | Identical |
| NF EN 60794-5-20 : 2018 | Identical |
| 12/30268386 DC : 0 | BS EN 50700 - INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| PREN 50700 : DRAFT 2012 | INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| EN 50700:2014 | Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
| BS EN 60794-5-10:2014 | Optical fibre cables Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| CEI EN 50174-3 : 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| 12/30260552 DC : 0 | BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| I.S. EN 50174-3:2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| PREN 50174-3 : DRAFT 2012 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| BS EN 50700:2014 | Information technology. Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
| I.S. EN 60794-5-10:2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| CEI EN 60794-5-10 : 2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| I.S. EN 50700:2014 | INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
| EN 60794-5-10:2014 | Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| IEC 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
| IEC 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| IEC 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
| EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
| IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| EN 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
| EN 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| EN 60794-5-10:2014 | Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| IEC 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| IEC 60811-202:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
| IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60794-5:2014 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| EN 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
| IEC 60794-5-10:2014 | Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| EN 60794-5:2016 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| EN 60794-1-2:2017/AC:2017-07 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
| IEC 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
| HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
| EN 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
| EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| IEC 60793-1-53:2014 | Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests |
| EN 60793-1-53:2014 | Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests |
| IEC 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.