EN 61086-2:2004
Current
The latest, up-to-date edition.
Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
22-04-2004
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Test specimens
4 Environmental exposure of coated specimens
5 Test methods (uncured material)
6 Test methods for electrical properties (coated samples)
7 Test methods for non-electrical properties (coated samples)
Annex A (normative) - Specimen of coating material
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Gives the methods of test for electrical insulating materials suitable for application as coatings for loaded printed wire boards (conformal coatings), both as uncured and after application to specific boards. The major changes concern the addition of a new specimen A, new cleaning and test procedures and a new layout.
| Committee |
CLC/SR 15
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 61086-2 : 2005 | Identical |
| IEC 61086-2:2004 | Identical |
| NEN EN IEC 61086-2 : 2004 C1 2005 | Identical |
| PN EN 61086-2 : 2005 | Identical |
| VDE 0361-2 : 2005 COR 1 2005 | Identical |
| SN EN 61086-2 : 1994 | Identical |
| UNE-EN 61086-2:2004 | Identical |
| I.S. EN 61086-2:2004 | Identical |
| NF EN 61086-2 : 2004 | Identical |
| DIN EN 61086-2 : 2005 COR 1 2005 | Identical |
| BS EN 61086-2:2004 | Identical |
| CEI EN 61086-2 : 2005 | Identical |
| NEN 11086-2 : 1994 | Identical |
| BS EN 61753-051-3:2013 | Identical |
| I.S. EN 61086-3-1:2004 | COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 3-1: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - COATINGS FOR GENERAL PURPOSE (CLASS 1), HIGH RELIABILITY (CLASS 2) AND AEROSPACE (CLASS 3) |
| BS EN 61086-3-1:2004 | Coatings for loaded printed wire boards (conformal coatings) Specifications for individual materials - Coatings for general purpose (class 1), high reliability (class 2) and aerospace (class 3) |
| CEI EN 61086-3-1 : 2005 | COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) PART 3-1: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - COATINGS FOR GENERAL PURPOSE (CLASS 1), HIGH RELIABILITY (CLASS 2) AND AEROSPACE (CLASS 3) |
| EN 61086-3-1 : 2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| EN 61086-1:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements |
| EN 605 : 1992 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| EN 61086-3-1 : 2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN 60068-2-39:2016 | Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests |
| IEC 61086-3-1:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| IEC 60068-2-39:2015 | Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests |
| EN 60707 : 1999 | FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAME SOURCES - LIST OF TEST METHODS |
| EN 60249-1 : 1993 COR 1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| IEC 60707:1999 | Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| HD 323.2.10 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST J AND GUIDANCE: MOULD GROWTH |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN 60068-2-11:1999 | Environmental testing - Part 2: Tests - Test Ka: Salt mist |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| IEC 61086-1:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.