• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 61587-2:2011

Current
Current

The latest, up-to-date edition.

MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS (IEC 61587-2:2011)
Published date

28-10-2011

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Set up of test specimen and measurement items
5 Test waveform and acceleration condition
6 Assessment following the test
Annex A (informative) - Vibration generators and information
Annex ZA (normative) - Normative references to international
         publications with their corresponding
         European publications

IEC 61587-2:2011 specifies seismic tests for cabinets and racks accommodated with IEC 60917 and 60297 series.

Committee
SR 48D
DevelopmentNote
Supersedes UNE EN 61587-2. (10/2014)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

CEI EN 61587-6 : 1ED 2017 MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 6: SECURITY ASPECTS FOR INDOOR CABINETS
BS EN 61969-3:2012 Mechanical structures for electronic equipment. Outdoor enclosures Environmental requirements, tests and safety aspects
EN 61587-4:2012 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets
EN 60917-2-4:2010 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in)
EN 60297-3-105:2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis
BS EN 60297-3-105:2009 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series Dimensions and design aspects for 1U high chassis
I.S. EN 61969-3:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV))
BS EN 61969-1:2012 Mechanical structures for electronic equipment. Outdoor enclosures Design guidelines
BS EN 61587-4:2012 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Combination of performance levels for modular cabinets
I.S. EN 60297-3-105:2009 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-105: DIMENSIONS AND DESIGN ASPECTS FOR 1U HIGH CHASSIS
I.S. EN 61587-4:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 4: COMBINATION OF PERFORMANCE LEVELS FOR MODULAR CABINETS (IEC 61587-4:2012 (EQV))
EN 61969-3:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
BS EN 61587-6:2017 Mechanical structures for electrical and electronic equipment. Tests for IEC 60917 and IEC 60297 series Security aspects for indoor cabinets
CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
EN 61587-6:2017 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets
I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
EN 61969-1:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines
CEI EN 61587-4 : 2013 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 4: COMBINATION OF PERFORMANCE LEVELS FOR MODULAR CABINETS
BS EN 60297-3-106:2010 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
CEI EN 61969-3 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS
I.S. EN 61969-1:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES (IEC 61969-1:2011 (EQV))
BS EN 61587-1:2017 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
CEI EN 60297-3-105 : 2010 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-105: DIMENSIONS AND DESIGN ASPECTS FOR 1U HIGH CHASSIS
I.S. EN 61587-6:2017 MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 6: SECURITY ASPECTS FOR INDOOR CABINETS
EN 61587-1:2017 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
BS EN 60917-2-4:2010 Modular order for the development of mechanical structures for electronic equipment practices Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in)
CEI EN 61969-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES
EN 60297-3-106:2010 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1

EN 60068-2-57:2013 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
IEC 60068-2-57:2013 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
IEC 60068-3-3:1991 Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments
EN 60068-3-3:1993 Environmental testing - Part 3: Guidance - Seismic test methods for equipments
IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-47:2005 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.