EN 61800-7-1:2016
Current
Current
The latest, up-to-date edition.
Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition
Published date
12-02-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 General architecture
5 Functional elements
6 Application modes
7 Profile specific extensions
8 Structure for annexes
Annex A (normative) - Mapping to profile CiA 402 drive
and motion control
Annex B (normative) - Mapping to profile CIP Motion[TM]
Annex C (normative) - Mapping to profile PROFIdrive
Annex D (normative) - Mapping to profile SERCOS
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 61800-7-1:2015 specifies a generic interface between power drive system(s) (PDS) and the application control program in a controller. The generic PDS interface is not specific to any particular communication network technology. Annexes of this part of IEC 61800 specify the mapping of the different drive profiles types onto the generic PDS interface. The functions specified in this part of IEC 61800 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This edition includes the following significant technical changes with respect to the previous edition:a) mapping of drive profile type 1 onto additional network technologies;b) minor updates in the subclauses for profile types 1, 2 and 4, in relation with corresponding changes in the dedicated IEC 61800-7-20x parts.
| Committee |
CLC/TC 22X
|
| DevelopmentNote |
Together with EN 61158-6-16, EN 61800-7-304, EN 61800-7-204, EN 61158-5-16, EN 61158-2, EN 61784-1, EN 61158-3-16 and EN 61158-4-16 supersedes EN 61491. (09/2008)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 61800-7-1:2015-02 (Draft) | Identical |
| DIN EN 61800-7-1:2016-11 | Identical |
| NF EN 61800-7-1 : 2016 | Identical |
| IEC 61800-7-1:2015 | Identical |
| NBN EN 61800-7-1 : 2016 | Identical |
| NEN EN IEC 61800-7-1 : 2016 | Identical |
| I.S. EN 61800-7-1:2016 | Identical |
| PN EN 61800-7-1 : 2016 | Identical |
| SN EN 61800-7-1 : 2016 | Identical |
| SS-EN 61800-7-1:2016 | Identical |
| UNE-EN 61800-7-1:2016 | Identical |
| BS EN 61800-7-1:2016 | Identical |
| CEI EN 61800-7-1 : 2016 | Identical |
| BS EN 61800-7-202:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 2 specification |
| BS EN 61800-7-301:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 1 to network technologies |
| BS EN 61800-7-204:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 4 specification |
| BS EN 61800-7-201:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 1 specification |
| I.S. EN 61800-7-201:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-201: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 1 SPECIFICATION |
| I.S. EN 61800-7-202:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-202: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 2 SPECIFICATION |
| EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| EN 62453-1:2017 | Field Device Tool (FDT) interface specification - Part 1: Overview and guidance |
| EN 61800-7-203:2016 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| EN 61800-7-201:2016 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| EN 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
| BS EN 61800-7-304:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 4 to network technologies |
| BS EN 61800-7-203:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 3 specification |
| BS EN 62453-1:2017 | Field Device Tool (FDT) interface specification Overview and guidance |
| EN 61800-7-302:2016 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
| BS EN 61800-7-303:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 3 to network technologies |
| BS EN 61800-7-302:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 2 to network technologies |
| CLC/TR 61491:2010 | Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
| I.S. EN 61800-7-304:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-304: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 4 TO NETWORK TECHNOLOGIES |
| I.S. EN 61800-7-204:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-204: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 4 SPECIFICATION |
| EN 61800-7-204:2016 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
| BS EN 61800-2:2015 | Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems |
| I.S. EN 61800-7-302:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-302: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 2 TO NETWORK TECHNOLOGIES |
| CEI CLC/TR 61491 : 2012 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - SERIAL DATA LINK FOR REAL-TIME COMMUNICATION BETWEEN CONTROLS AND DRIVES |
| S.R. CLC/TR 61491:2010 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - SERIAL DATA LINK FOR REAL-TIME COMMUNICATION BETWEEN CONTROLS AND DRIVES |
| I.S. EN 61800-7-301:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-301: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 1 TO NETWORK TECHNOLOGIES |
| I.S. EN 61800-7-203:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-203: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 3 SPECIFICATION |
| I.S. EN 61800-7-303:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-303: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 3 TO NETWORK TECHNOLOGIES |
| I.S. EN 61800-2:2015 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS |
| EN 61800-7-303:2016 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| EN 61800-7-301:2016 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| IEC 61158-6-14:2014 | Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements |
| IEC 61800-4:2002 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| IEC 61158-5-13:2014 | Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements |
| EN 61158-5-10:2014 | Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements |
| EN 61158-6-2:2014 | Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements |
| ISO/IEC 7498-3:1997 | Information technology Open Systems Interconnection Basic Reference Model: Naming and addressing |
| IEC 61800-7-301 : 2.0 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-301: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 1 TO NETWORK TECHNOLOGIES |
| IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| EN 61158-6-10:2014 | Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements |
| ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
| EN 61158-5-13:2014 | Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements |
| IEC 61800-7-303:2015 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| EN 61800-7-303:2016 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
| EN 61158-5-14:2014 | Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements |
| IEC 61158-6-10:2014 | Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements |
| EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| EN 61800-7-302:2016 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
| EN 61499-1:2013 | Function blocks - Part 1: Architecture |
| IEC 61800-7-204:2015 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
| IEC 61800-7-302:2015 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
| EN 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
| EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| IEC 61158-6-2:2014 | Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 elements |
| IEC 61800-7-304:2015 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| IEC 61158-6-13:2014 | Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements |
| IEC TR 62390:2005 | Common automation device - Profile guideline |
| EN 61800-7-201:2016 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| IEC 61800-7-201 : 2.0 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-201: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 1 SPECIFICATION |
| EN 61158-5-19:2014 | Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements |
| EN 61158-5-16:2008 | Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 elements |
| IEC 62026-3:2014 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| ISO 15745-1:2003 | Industrial automation systems and integration Open systems application integration framework Part 1: Generic reference description |
| EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| IEC 61158-5-14:2014 | Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements |
| EN 61158-5-23:2014 | Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements |
| IEC 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
| EN 61158-5-3:2014 | Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements |
| EN 50325-4:2002 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen |
| IEC 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
| ISO 7498-2:1989 | Information processing systems Open Systems Interconnection Basic Reference Model Part 2: Security Architecture |
| IEC 61158-5-3:2014 | Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements |
| EN 61158-6-14:2014 | Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements |
| ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
| EN 61158-6-3:2014 | Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements |
| EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| IEC 61800-7-201:2015 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| EN 61158-6-13:2014 | Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements |
| IEC 61158-5-16:2007 | Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 elements |
| IEC 61800-7-203:2015 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| IEC 61158-5-10:2014 | Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements |
| EN 61158-6-16:2008 | Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 elements |
| IEC 61499-1:2012 | Function blocks - Part 1: Architecture |
| EN 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
| IEC 61158-5-2:2014 | Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements |
| IEC 61158-6-19:2014 | Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements |
| EN 61800-4:2003 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| EN 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
| EN 61158-6-23:2014 | Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements |
| EN 61800-7-204:2016 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
| IEC 61800-7-301:2015 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| IEC 61158-5-19:2014 | Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements |
| EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| EN 61158-5-2:2014 | Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 elements |
| IEC 61158-6-3:2014 | Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elements |
| EN 61158-6-19:2014 | Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 elements |
| IEC 61800-7-202:2015 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| EN 61800-7-203:2016 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| EN 61800-7-301:2016 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies |
| IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
| IEC 61158-6-16:2007 | Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 elements |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.