EN 62031:2008/A2:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
20-03-2020
16-01-2015
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General test requirements
6 Classification
7 Marking
8 Terminals
9 Provisions for protective earthing
10 Protection against accidental contact with live parts
11 Moisture resistance and insulation
12 Electric strength
13 Fault conditions
14 Conformity testing during manufacture
15 Construction
16 Creepage distances and clearances
17 Screws, current-carrying parts and connections
18 Resistance to heat, fire and tracking
19 Resistance to corrosion
20 Information for luminaire design
21 Heat management
22 Photobiological safety
Annex A (normative) - Tests
Annex B (informative) - Overview of systems composed
of LED modules and control gear
Annex C (informative) - Conformity testing during
manufacture
Annex D (informative) - Information for luminaire
design
Bibliography
Annex ZA (normative) - Normative references to
international publications with their corresponding
European publications
Defines general and safety requirements for light-emitting diode (LED) modules: - LED modules without integral control gear for operation under constant voltage, constant current or constant power; - self-ballasted LED modules for use on d.c. supplies up to 250 V or a.c. supplies up to 1000 V at 50 Hz or 60 Hz.
| Committee |
TC 34
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 62031:2009 | Identical |
| NF EN 62031 : 2008 AMD 2 2015 | Identical |
| IEC 62031:2008+AMD1:2012+AMD2:2014 CSV | Identical |
| NBN EN 62031 : 2010 AMD 2 2015 | Identical |
| NEN EN IEC 62031 : 2008 AMD 2 2015 | Identical |
| I.S. EN 62031:2008 | Identical |
| PN EN 62031 : 2010 AMD 2 2015 | Identical |
| VDE 0715-5 : 2015 | Identical |
| DIN EN 62031 : 2015 | Identical |
| BS EN 62031 : 2008 | Identical |
| SN EN 62031:2008+A1:2013+A2:2015 | Identical |
| CEI EN 62031/A2 : 2015 | Identical |
| BS EN 62031:2008+A2:2015 | Identical |
| I.S. EN 62838:2016 | LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS |
| 17/30353444 DC : DRAFT SEP 2017 | BS EN 13272-2 - RAILWAY APPLICATIONS - ELECTRICAL LIGHTING FOR ROLLING STOCK IN PUBLIC TRANSPORT SYSTEMS - PART 2: URBAN RAIL SYSTEMS |
| CEI EN 62717 : 2017 | LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
| BS EN 62504:2014 | General lighting. Light emitting diode (LED) products and related equipment. Terms and definitions |
| BS EN 13032-4:2015 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires LED lamps, modules and luminaires |
| EN 62838:2016/AC:2017-11 | LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS |
| EN 13032-4:2015 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
| EN 62722-2-1:2016 | Luminaire performance - Part 2-1: Particular requirements for LED luminaires |
| I.S. EN 62717:2017 | LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
| 16/30342256 DC : 0 | BS EN 50107-3 - PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| CEI 34-119 : 2010 | GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES |
| I.S. EN 62931:2017 | GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS |
| EN 62717:2017 | LED modules for general lighting - Performance requirements |
| UNE-EN 62722-2-1:2016 | Luminaire performance - Part 2-1: Particular requirements for LED luminaires |
| BS EN 60838-2-2 : 2006 | MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES |
| 13/30282207 DC : 0 | BS EN 13032-4 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| DIN EN 13032-4:2015-08 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| I.S. EN 62560:2012&A1:2015&A11:2019 | SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
| I.S. EN 62776:2015 | DOUBLE-CAPPED LED LAMPS DESIGNED TO RETROFIT LINEAR FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
| EN 62931:2017 | GX16t-5 capped tubular led lamp - Safety specifications |
| PREN 50107-3 : DRAFT 2016 | PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| 16/30336682 DC : 0 | BS EN 62717 ED1.0 - LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS |
| I.S. EN 60838-2-2:2006 | MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES (IEC 60838-2-2:2006 (EQV)) |
| I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 60598-1:2015 | Luminaires General requirements and tests |
| I.S. EN 62722-2-1:2016 | LUMINAIRE PERFORMANCE - PART 2-1: PARTICULAR REQUIREMENTS FOR LED LUMINAIRES |
| UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| BS EN 62838:2016 | LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. Safety specifications |
| UNE-EN 62838:2016 | LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications |
| UNE-EN 13032-4:2016 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| UNE-EN 62560:2013 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications |
| CEI EN 62931 : 1ED 2017 | GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS |
| BS EN 62722-2-1:2016 | Luminaire performance Particular requirements for LED luminaires |
| BS EN 62931:2017 | GX16t-5 capped tubular led lamp. Safety specifications |
| BS EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps. Safety specifications |
| I.S. EN 13032-4:2015 | LIGHT AND LIGHTING - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| BS EN 62560:2012+A11:2019 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications |
| UNE-EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
| EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| DIN EN 13032-4 E : 2015 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| EN 60838-2-2:2006/A1:2012 | MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES (IEC 60838-2-2:2006/A1:2012) |
| IEC TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
| IEC 61347-2-13:2014+AMD1:2016 CSV | Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
| EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
| EN 62384:2006/A1:2009 | DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC TS 62504:2011 | General lighting - LEDs and LED modules - Terms and definitions |
| IEC 62384:2006+AMD1:2009 CSV | DC or AC supplied electronic control gear for LED modules - Performance requirements |
| IEC 60838-2-2:2006+AMD1:2012 CSV | Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| EN 60838-2-2:2006/A1:2012 | MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES (IEC 60838-2-2:2006/A1:2012) |
| ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
| EN 62471:2008 | Photobiological safety of lamps and lamp systems |
| IEC 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.