EN 771-4:2011+A1:2015
Current
Current
The latest, up-to-date edition.
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Published date
19-08-2015
Publisher
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and manufacture
5 Requirements for AAC masonry units
6 Description, designation and classification of
AAC masonry units
7 Marking
8 Assessment and verification of constancy
of performance (AVCP)
Annex A (normative) - Sampling for product type determination
test and for independent
testing of consignments
Annex B (normative) - Cutting schemes
Annex C (informative) - Guidance on FPC frequencies
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
This European Standard specifies the characteristics and performance requirements of autoclaved aerated concrete (AAC) masonry units for which the main intended uses are different types of load bearing and non-load bearing applications in all forms of walling including single leaf, cavity, partitions, retaining, basement and general use below ground level, including walling for fire protection, thermal insulation, sound insulation and the fabric of chimneys (excluding chimney flue units).This European Standard includes AAC masonry units with an incorporated insulation not exposed to fire, and masonry units of an overall rectangular parallelepiped shape, specially shaped and accessory units. AAC masonry units may consist of layers of different densities where not all of the layers are loadbearing.It provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard.The marking requirement for products covered by this European Standard is included.This European Standard does not cover the requirements for storey height panels, flue linings and masonry units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire. It does not specify standard sizes for autoclaved aerated concrete units nor standard work dimensions and angles of specially shaped and accessory units. It does not give permissible deviations for specially shaped and accessory units. It does not cover products intended for use as a damp proof course or the lining of a chimney.
| Committee |
CEN/TC 125
|
| DevelopmentNote |
2011 Edition Re-Issued in August 2015 & incorporates AMD 1 2015. (08/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 771-4:2015 | Identical |
| UNI EN 771-4 : 2011 | Identical |
| I.S. EN 771-4:2011 | Identical |
| I.S. EN 771-4:2011+A1:2015 | Identical |
| NBN EN 771-4 : 2011 + A1 2015 | Identical |
| NEN EN 771-4 : 2011 + A1 2015 | Identical |
| SANS 50771-4 : 2ED 2014 | Identical |
| BS EN 771-4 : 2011 | Identical |
| DIN EN 771-4:2015-11 | Identical |
| NS EN 771-4 : 2011 + A1 2015 | Identical |
| NF EN 771-4 : 2011 + A1 2015 | Identical |
| PN EN 771-4 : 2012 + A1 2015 | Identical |
| SN EN 771-4 : 2011 + A1 2015 | Identical |
| UNE-EN 771-4:2011+A1:2016 | Identical |
| BS EN 771-4:2011+A1:2015 | Identical |
| UNE-EN 771-4:2011 | Identical |
| I.S. EN 1996-1-2:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX) |
| CEN/TR 16886 : 2016 | GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS |
| 10/30212126 DC : 0 | BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| DIN EN 771-6:2015-11 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| DIN EN 772-2:2005-05 | METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN MASONRY UNITS (BY PAPER INDENTATION) |
| DIN EN 1996-1-2:2011-04 | Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010) |
| BS EN 1015-9:1999 | Methods of test for mortar for masonry Determination of workable life and correction time of fresh mortar |
| BS EN 846-8:2000 | Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers |
| BS EN 772-13:2000 | Methods of test for masonry units Determination of net and gross dry density of masonry units (except for natural stone) |
| I.S. EN 15304:2010 | DETERMINATION OF THE FREEZE-THAW RESISTANCE OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 15254-2:2009-10 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
| EN 1015-9:1999/A1:2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 9: DETERMINATION OF WORKABLE LIFE AND CORRECTION TIME OF FRESH MORTAR |
| DIN EN 772-21:2011-07 | Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
| 10/30215389 DC : 0 | BS EN 772-21 - METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
| PREN 772-16 : DRAFT 2010 | METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
| DIN V 4165-100:2005-10 | AUTOCLAVED AERATED CONCRETE MASONRY UNITS - PART 100: HIGH PRECISION UNITS AND ELEMENTS WITH SPECIFIC PROPERTIES |
| UNI EN 15080-12 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
| I.S. EN 15080-12:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
| UNI EN 772-21 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
| NF EN 772-21 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
| UNE-EN 15080-12:2011 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
| DIN EN 772-11:2011-07 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
| DIN EN 772-20:2005-05 | METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MASONRY UNITS |
| DIN EN 772-16:2011-07 | Methods of test for masonry units - Part 16: Determination of dimensions |
| DIN EN 15304:2010-06 | Determination of the freeze-thaw resistance of autoclaved aerated concrete |
| BS EN 772-1 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN 772-1:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN 771-6:2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| I.S. EN 772-16:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
| DIN EN 1996-1-1:2013-02 | Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012) |
| I.S. EN 846-7:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
| DIN EN 772-1:2000-09 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN 772-11:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
| I.S. EN 680:2006 | DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE |
| I.S. EN 846-5:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
| I.S. EN 846-6:2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6 - DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST) |
| DIN EN 772-9:2005-05 | METHODS OF TEST FOR MASONRY UNITS - PART 9: DETERMINATION OF VOLUME AND PERCENTAGE OF VOIDS AND NET VOLUME OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY SAND FILLING |
| DIN EN 1015-9:2007-05 | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar (includes Amendment A1:2006) |
| I.S. EN 1996-1-1:2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 772-21:2011 | Methods of test for masonry units Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
| I.S. EN 1996-3:2006 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX) |
| BS EN 15254-2:2009 | Extended application of results from fire resistance tests. Nonloadbearing walls Masonry and gypsum blocks |
| UNE-EN 1996-1-2:2011 | Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design |
| 10/30215383 DC : 0 | BS EN 772-16 - METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
| 03/310764 DC : DRAFT JULY 2003 | EN 680 - DETERMINATION OF DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE |
| 08/30183870 DC : DRAFT AUG 2008 | BS EN 15304 - DETERMINATION OF THE FREEZE-THAW RESISTANCE OF AUTOCLAVED AERATED CONCRETE |
| 05/30115489 DC : DRAFT AUG 2005 | EN 15304 - DETERMINATION OF THE FREEZE-THAW RESISTANCE OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 15080-12:2011-04 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
| I.S. EN 772-21:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION |
| UNI EN 15254-2 : 2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
| I.S. ENV 1996-1-2:1995 | EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNE-EN 15304:2011 | Determination of the freeze-thaw resistance of autoclaved aerated concrete |
| PREN 772-11 : DRAFT 2010 | METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
| DIN EN 1996-3:2010-12 | Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009) |
| BS EN 772-20:2000 | Methods of test for masonry units Determination of flatness of faces of masonry units |
| UNE-EN 846-5:2013 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| UNE-EN 771-6:2012 | Specification for masonry units - Part 6: Natural stone masonry units |
| EN 771-6:2011+A1:2015 | Specification for masonry units - Part 6: Natural stone masonry units |
| EN 846-6:2012 | Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
| UNI EN 846-7 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
| UNI EN 846-6 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST) |
| UNI EN 846-5 : 2012 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
| UNI EN 1996-1-2 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| UNI EN 772-11 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
| UNI EN 15304 : 2010 | DETERMINATION OF THE FREEZE-THAW RESISTANCE OF AUTOCLAVED AERATED CONCRETE |
| UNI EN 1996-1-1 : 2013 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| UNI EN 772-16 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS |
| 10/30215380 DC : 0 | BS EN 772-11 - METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS |
| 07/30172842 DC : 0 | BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS |
| 05/30134891 DC : 0 | EN 15254-2 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
| S.R. CEN/TR 16886:2016 | GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS |
| BS EN 772-2:1998 | Methods of test for masonry units Determination of percentage area of voids in masonry units (by paper indentation) |
| BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| BS EN 1996-1-2:2005 | Eurocode 6. Design of masonry structures General rules. Structural fire design |
| BS EN 680:2005 | Determination of the drying shrinkage of autoclaved aerated concrete |
| UNE-EN 846-6:2015 | Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
| BS EN 772-9:1998 | Methods of test for masonry units Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling |
| BS EN 846-5:2012 | Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS EN 15304:2010 | Determination of the freeze-thaw resistance of autoclaved aerated concrete |
| BS EN 846-6:2012 | Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) |
| BS EN 846-7:2012 | Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| UNE-EN 846-7:2015 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| DIN EN 15304 E : 2010 | DETERMINATION OF THE FREEZE-THAW RESISTANCE OF AUTOCLAVED AERATED CONCRETE |
| BS EN 772-16:2011 | Methods of test for masonry units Determination of dimensions |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
| EN 846-7:2012 | Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 772-13:2000 | Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone) |
| EN 1996-3:2006/AC:2009 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES |
| EN 15304:2010 | Determination of the freeze-thaw resistance of autoclaved aerated concrete |
| ENV 1996-1-2 : 1995 | EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 772-21:2011 | Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
| EN 772-9:1998/A1:2005 | METHODS OF TEST FOR MASONRY UNITS - PART 9: DETERMINATION OF VOLUME AND PERCENTAGE OF VOIDS AND NET VOLUME OF CALCIUM SILICATE MASONRY UNITS BY SAND FILLING |
| EN 15254-2:2009 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks |
| EN 846-5:2012 | Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
| EN 772-20:2000/A1:2005 | METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MOSONRY UNITS |
| EN 680 : 2005 | DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE |
| EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
| EN 15080-12:2011 | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
| EN 772-2:1998/A1:2005 | METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION) |
| EN 846-8:2000/A1:2006 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS |
| EN 1996-1-2:2005/AC:2010 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| DIN EN 15254-2 E : 2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
| BS EN 15080-12:2011 | Extended application of results from fire resistance tests Loadbearing masonry walls |
| PD CEN/TR 16886:2016 | Guidance on the application of statistical methods for determining the properties of masonry products |
| UNE-EN 1996-1-1:2011 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| UNE-EN 15254-2:2010 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks |
| I.S. EN 15254-2:2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NONLOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS |
| DIN EN 772-1:2016-05 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| BS EN 772-11:2000 | Methods of test for masonry units Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
| BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
| DIN EN 680:2006-03 | DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 846-7:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
| DIN EN 846-5:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
| DIN EN 846-6:2012-11 | METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST) |
| UNE-EN 772-1:2011 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| EN 680 : 2005 | DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 772-20:2000/A1:2005 | METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MOSONRY UNITS |
| EN 1996-1-2:2005/AC:2010 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| EN 1052-3:2002/A1:2007 | METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH |
| EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
| EN 772-13:2000 | Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone) |
| EN 1052-2:2016/AC:2017 | METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.