• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 932-5:2012/AC:2014

Current
Current

The latest, up-to-date edition.

TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
Amendment of

EN 932-5:2012

Published date

28-05-2014

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Common equipment
5 Calibration and checking
6 Reagents
Annex A (normative) - Method for the
        performance check of sieves
Annex B (normative) - Procedure for the
        manual checking of perforated
        plate test sieve openings
Annex C (informative) - Balance recommendation
        for various standard test methods
Bibliography

Describes general requirements for common equipment, calibration and checking procedures and reagents for the testing of the properties of aggregates.

Committee
TC 154
DevelopmentNote
Supersedes PREN 932-5. (03/2012)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DIN EN 1367-8 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
02/101929 DC : DRAFT FEB 2002 PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION
BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates
BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates
07/30165780 DC : DRAFT AUG 2007 BS EN 1097-5 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
07/30166977 DC : DRAFT AUG 2007 BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
PREN 13286-54 : DRAFT 2011 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
BS EN 933-11:2009 Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate
10/30218648 DC : DRAFT JUNE 2010 BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE)
08/30185875 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 1744-7:2012-05 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
11/30241878 DC : 0 BS EN 933-6 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
I.S. EN 16236:2013 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
06/30153220 DC : 0 BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT
BS EN 1744-7:2012 Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
UNE-EN 1367-8:2015 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
I.S. EN 1744-7:2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE)
08/30188887 DC : 0 BS EN 933-9 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
I.S. EN 1367-6:2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
I.S. EN 1744-8:2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
UNI EN 1744-7 : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE)
PREN 13383-2 : DRAFT 2017 ARMOURSTONE - PART 2: TEST METHODS
DIN EN 16236:2015-07 (Draft) EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
EN 13383-1:2002/AC:2004 ARMOURSTONE - PART 1: SPECIFICATION
DIN EN 1367-2:2010-02 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
DIN EN 933-8:2015-07 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
BS EN 1097-4:2008 Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler
BS EN 1097-9:2014 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test
BS EN 1097-8:2009 Tests for mechanical and physical properties of aggregates Determination of the polished stone value
BS EN 12697-38:2004 Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration
UNE-EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
BS EN 1744-6:2006 Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS EN 13450:2013 Aggregates for railway ballast
BS EN 1097-1:2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)
BS EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
BS EN 1367-3:2001 Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt
BS EN 932-1:1997 Tests for general properties of aggregates Methods for sampling
BS EN 13043:2013 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
I.S. EN 1097-1:2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL)
EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
I.S. EN 1367-2:2009 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST
EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
I.S. EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
EN 1097-4:2008 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 13450:2002/AC:2004 AGGREGATES FOR RAILWAY BALLAST
EN 12620:2002+A1:2008 Aggregates for concrete
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13383-2:2013 Armourstone - Part 2: Test methods
EN 13139:2002/AC:2004 AGGREGATES FOR MORTAR
EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
UNI EN 16236 : 2013 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
04/30077125 DC : 0 EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES
I.S. EN 13055-2:2004 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
PREN 16236 : DRAFT 2015 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
UNI EN 933-11 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
11/30246470 DC : 0 BS EN 13286-54 - UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
DIN EN 1367-7:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
04/30088151 DC : DRAFT FEB 2004 EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
00/105661 DC : DRAFT AUG 2000 BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
16/30320756 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
12/30256925 DC : 0 BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
09/30195711 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
PD CEN/TS 13286-54:2014 Unbound and hydraulically bound mixtures Test method for the determination of frost susceptibility. Resistance to freezing and thawing of hydraulically bound mixtures
09/30195708 DC : 0 BS EN 13383-1 - ARMOURSTONE - PART 1: SPECIFICATION
DIN 4226-2:2002-02 AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES
I.S. EN 13055:2016 LIGHTWEIGHT AGGREGATES
UNI EN 1367-7 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
I.S. EN 1097-11:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
UNI CEN/TS 13286-54 : 2014 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
NF EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 1367-1:2007-06 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
DIN EN 933-6:2014-07 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
DIN EN 933-9:2013-07 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (includes Amendment A1:2013)
DIN EN 1367-4:2008-06 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
DIN EN 1367-5:2011-04 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
BS EN 933-9 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
BS EN 13055-2:2004 Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS EN 933-3:2012 Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index
BS EN 933-1:2012 Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method
I.S. EN 933-10:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
I.S. EN 933-6:2014 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
I.S. EN 1367-1:2007 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING
I.S. EN 1097-5:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
I.S. EN 13179-1:2013 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST
I.S. EN 13450:2013 AGGREGATES FOR RAILWAY BALLAST
I.S. EN 1097-7:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
I.S. EN 933-3:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX
I.S. EN 933-1:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
I.S. EN 1097-6:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
I.S. EN 933-8:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
I.S. EN 933-9:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
I.S. EN 1097-4:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
I.S. EN 933-4:2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
I.S. EN 1367-4:2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
I.S. EN 1097-9:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
I.S. EN 1367-5:2011 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK
DIN EN 933-6:2002-02 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
I.S. EN 1744-1:2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
ONORM EN 1097-7 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
UNE-EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
DIN EN 1367-8:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
DIN EN 1097-11 E : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
BS EN 13055:2016 Lightweight aggregates
DIN EN 1097-11:2013-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
DIN EN 1744-8:2012-11 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
08/30185872 DC : 0 BS EN 933-10 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
I.S. EN 13055-1:2002 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
07/30166974 DC : DRAFT AUG 2007 BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST
UNI EN 1097-11 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
UNI EN 1367-8 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
06/30153237 DC : DRAFT JULY 2006 BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES
10/30218642 DC : DRAFT JUNE 2010 BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
PREN 933-9 : DRAFT 2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
BS EN 1367-6:2008 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl)
PREN 933-10 : DRAFT 2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
DIN EN 1744-4:2005-10 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
DIN EN 1744-1:2013-03 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
DIN EN 1744-5:2006-12 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
DIN EN 933-3:2012-04 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DIN EN 1744-6:2006-12 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
DIN EN 1097-10:2014-09 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
DIN EN 1097-4:2008-06 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
DIN EN 1097-1:2011-04 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
DIN EN 1097-8:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 933-10:2009-10 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
DIN EN 1097-5:2008-06 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
DIN EN 1097-6:2013-09 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
BS EN 1097-5:2008 Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven
BS EN 13383-2:2013 Armourstone Test methods
BS EN 933-6:2014 Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates
UNI EN 1097-7 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
UNI EN 1744-1 : 2013 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
UNI EN 933-3 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX
UNI EN 1367-2 : 2010 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST
UNI EN 1367-1 : 2007 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING
UNI EN 933-6 : 2014 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
UNI EN 13139 : 2013 AGGREGATES FOR MORTAR
UNI EN 13242 : 2013 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION
UNI EN 1367-4 : 2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
UNI EN 13179-1 : 2013 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST
UNI EN 1097-5 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
UNI EN 933-1 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
UNI EN 933-4 : 2008 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
UNI EN 13383-1 : 2013 ARMOURSTONE - PART 1: SPECIFICATION
UNI EN 1097-10 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
UNI EN 1744-6 : 2007 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
UNI EN 1367-5 : 2011 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK
I.S. EN 13043:2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 13043 : 2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 1097-1 : 2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL)
UNI EN 1097-9 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
UNI EN 933-10 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
UNI EN 1097-4 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
UNI EN 13383-2 : 2013 ARMOURSTONE - PART 2: TEST METHODS
UNI EN 12620 : 2013 AGGREGATES FOR CONCRETE
UNI EN 13450 : 2013 AGGREGATES FOR RAILWAY BALLAST
UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates
I.S. EN 933-11:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
07/30165777 DC : DRAFT AUG 2007 BS EN 1097-4 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
DIN EN 1367-7 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
11/30231793 DC : 0 BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES
07/30165783 DC : DRAFT AUG 2007 BS EN 1097-7 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
S.R. CEN/TS 13286-54:2014 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES
14/30303776 DC : 0 BS EN 13285 - UNBOUND MIXTURES - SPECIFICATIONS
BS EN 1744-8:2012 Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
07/30165774 DC : DRAFT AUG 2007 BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
DIN EN 933-11:2011-05 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009)
PREN 933-6 : DRAFT 2011 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
15/30311106 DC : 0 BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
EN 16236:2013 Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control
18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 933-4:2015-01 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 1097-7:2008-06 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DIN EN 1097-3:1998-06 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS
DIN EN 1097-9:2014-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN 1744-1 : 2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method
BS EN 933-4:2008 Tests for geometrical properties of aggregates Determination of particle shape. Shape index
BS EN 12620:2013 Aggregates for concrete
UNE-EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
BS EN 13383-1:2013 Armourstone Specification
UNI EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
BS EN 933-10:2009 Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving)
UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN 13139:2013 Aggregates for mortar
UNE-EN 1744-1:2010 Tests for chemical properties of aggregates - Part 1: Chemical analysis
BS EN 13055-1:2002 Lightweight aggregates Lightweight aggregates for concrete, mortar and grout
BS EN 1367-2:2009 Tests for thermal and weathering properties of aggregates Magnesium sulfate test
BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing
UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
BS EN 1367-5:2011 Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock
BS EN 1744-4:2005 Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures
BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption
UNE-EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
BS EN 933-8 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
BS EN 13179-2:2000 Test for filler aggregate used in bituminous mixtures Bitumen number
I.S. EN 1097-8:2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
UNE-EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
BS EN 1367-4:2008 Tests for thermal and weathering properties of aggregates Determination of drying shrinkage
EN 1367-6:2008 Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
UNI EN 933-9 : 2013 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 1367-7:2014 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
EN 933-11:2009/AC:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
UNI EN 1097-6 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
ONORM EN 1744-4 : 2005 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
EN 1744-5:2006 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling
EN 933-6:2014 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
EN 1367-3:2001/AC:2004 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT"
EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-10:2009 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
EN 1744-8:2012 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
DIN EN 1744-8 E : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
04/30088146 DC : DRAFT FEB 2004 EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS
DIN EN 1367-6:2008-12 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
DIN 4226-1:2001-07 AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES
17/30345777 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNE-EN 1744-8:2013 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
I.S. EN 1367-8:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
PREN 1744-5 : DRAFT 2004 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS
UNI EN 1367-6 : 2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
UNE-EN 1367-7:2015 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
PREN 1097-8 : DRAFT 2016 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
UNI EN 1744-8 : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
I.S. EN 1367-7:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
BS EN 16236:2013 Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control
BS EN 1744-3:2002 Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates Determination of water suction height
UNE-EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
UNE-EN 1097-10:2015 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
BS EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures Delta ring and ball test
BS EN 1744-5:2006 Tests for chemical properties of aggregates Determination of acid soluble chloride salts
EN 13055 : 2016 LIGHTWEIGHT AGGREGATES
EN 13179-2:2000 Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number
I.S. EN 1744-4:2005 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
DIN EN 13055-2:2004-09 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
DIN EN 13055-1:2002-08 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
DIN EN 1097-10:2003-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
I.S. EN 1097-10:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
EN 1744-4:2005 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
UNE-EN 933-9:2010 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 386:1977 Liquid-in-glass laboratory thermometers Principles of design, construction and use
ISO 3310-1:2016 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
EN ISO 3650:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS
ISO 3310-2:2013 Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
ISO 4788:2005 Laboratory glassware Graduated measuring cylinders
ISO 3650:1998 Geometrical Product Specifications (GPS) Length standards Gauge blocks
EN 933-2:1995 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures
ISO 384:2015 Laboratory glass and plastics ware Principles of design and construction of volumetric instruments
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
ISO 6353-3:1987 Reagents for chemical analysis — Part 3: Specifications — Second series
EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
OIML R 76-1 : 2006 NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS
ISO 649-1:1981 Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.