EN 933-1:2012
Current
Current
The latest, up-to-date edition.
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
Published date
11-01-2012
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Preparation of test portions
7 Procedure
8 Calculation and expression of results
9 Test report
Annex A (normative) - Alternative test method for
all-in aggregate with D >= 31,5 mm
Annex B (normative) - Test method for aggregates
unsuitable for oven-drying
Annex C (informative) - Example of test data sheet
Annex D (informative) - Graphical presentation of results
Bibliography
This European Standard describes the reference washing and dry sieving method used for type testing and in case of dispute, for determination of the particle size distribution of aggregates. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. It applies to all aggregates, including lightweight aggregates, up to 90 mm nominal size, but excluding filler. NOTE 1The determination of the grading of fillers is specified in EN 933-10 Assessment of fines — Grading of filler aggregates (air jet sieving).NOTE 2Dry sieving without washing may be used for aggregates free from particles which cause agglomeration.
| Committee |
CEN/TC 154
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 933-1 : 2012 | Identical |
| NF EN 933-1 : 2012 | Identical |
| I.S. EN 933-1:2012 | Identical |
| UNE-EN 933-1:2012 | Identical |
| SN EN 933-1:2013 | Identical |
| NBN EN 933-1 : 2012 | Identical |
| NEN EN 933-1 : 2012 | Identical |
| PN EN 933-1 : 2012 | Identical |
| DIN EN 933-1:2012-03 | Identical |
| SN 670902-1 : 2013 | Identical |
| UNI EN 933-1 : 2012 | Identical |
| BS EN 933-1:2012 | Identical |
| NS EN 993-1 : 1ED 1995 | Identical |
| S.R. CEN TS 14243:2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| PREN 932-5 : DRAFT 2009 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| I.S. EN 13108-8:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| 09/30207822 DC : 0 | BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| BS EN 14227-15:2015 | Hydraulically bound mixtures. Specifications Hydraulically stabilized soils |
| BS EN 13285:2010 | Unbound mixtures. Specifications |
| DIN EN 15600-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| BS EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
| 02/102929 DC : 0 | PREN 14440 - SLURRY SURFACING - FACTORY PRODUCTION CONTROL |
| DIN EN 15732:2013-01 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 06/30155785 DC : 0 | BS EN 15564 - PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| 09/30209668 DC : 0 | BS EN 16025-1 - THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| PREN 13450 : DRAFT 2015 | AGGREGATES FOR RAILWAY BALLAST |
| 02/101684 DC : DRAFT FEB 2002 | PREN 14316-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DD ENV ISO 10722-1:1998 | Geotextiles and geotextile-related products. Procedure for simulating damage during installation. Installation in granular materials |
| 04/30110128 DC : 0 | BS EN 14243 - POST-CONSUMER TYRE - MATERIALS AND APPLICATIONS |
| PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 1367-6:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| DIN EN 12697-2 E : 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 1744-8:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| UNI EN 13285 : 2010 | UNBOUND MIXTURES - SPECIFICATION |
| PREN 14243-3 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| PREN 13383-2 : DRAFT 2017 | ARMOURSTONE - PART 2: TEST METHODS |
| UNI EN 15732 : 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| PREN 16809-1 : DRAFT 2014 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 1: SPECIFICATION FOR THE BONDED AND LOOSE FILLED PRODUCTS BEFORE INSTALLATION |
| EN ISO 10722:2007 | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007) |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| DIN EN 14227-5:2013-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND GRANULAR MIXTURES |
| DIN EN 933-8:2015-07 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| DIN EN 14227-3:2013-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND GRANULAR MIXTURES |
| DIN EN 13286-2:2013-02 | Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction (includes Corrigendum :2012) |
| BS EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test |
| BS EN 13450:2013 | Aggregates for railway ballast |
| BS EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval) |
| BS EN 13242:2013 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| UNE-EN 14227-5:2014 | Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures |
| BS EN 1367-3:2001 | Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
| BS EN 14227-13:2006 | Hydraulically bound mixtures. Specifications Soil treated by hydraulic road binder |
| BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| BS EN 13294:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time |
| I.S. EN 1097-1:2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
| I.S. EN 15330-1:2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| I.S. EN 14227-1:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
| DIN EN 14227-10:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL TREATED BY CEMENT |
| DIN EN 14316-1:2004-11 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004 |
| EN 13294:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
| DIN EN 12697-1:2012-09 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| I.S. EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
| DIN EN 14227-14:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 14: SOIL TREATED BY FLY ASH |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 13075-2:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| DIN EN 14317-1:2004-11 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004 |
| CEN/TS 16637-3:2016 | Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test |
| EN 12697-15 : 2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 15: DETERMINATION OF THE SEGREGATION SENSITIVITY |
| EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 13055-1:2002/AC:2004 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| DIN EN 13075-2:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| EN 13450:2002/AC:2004 | AGGREGATES FOR RAILWAY BALLAST |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| CEN/TS 14243:2010 | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| EN 13055-2:2004 | Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| EN 13383-2:2013 | Armourstone - Part 2: Test methods |
| EN 13139:2002/AC:2004 | AGGREGATES FOR MORTAR |
| EN 12767:2007 | Passive safety of support structures for road equipment - Requirements, classification and test methods |
| EN 12697-2:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| EN 13286-4:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER |
| EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| EN 12274-7 : 2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| ONORM EN 14487-1 : 2006 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| UNE-EN 13285:2010 | Unbound mixtures - Specifications |
| 17/30365077 DC : 0 | BS EN 14243-3 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| DIN EN 15599-1 E : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 16025-1:2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| I.S. EN 14227-12:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 12: SOIL TREATED BY SLAG |
| 04/30077125 DC : 0 | EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES |
| I.S. EN 13055-2:2004 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| I.S. EN 14227-13:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 13: SOIL TREATED BY HYDRAULIC ROAD BINDER |
| DIN EN 15564 E : 2009 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| 15/30311097 DC : 0 | BS EN 13450 - AGGREGATES FOR RAILWAY BALLAST |
| PREN 1317-5 : DRAFT 2013 | ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA |
| 12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 11/30240498 DC : 0 | BS EN 14227-2 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES |
| PREN 1176-1 : DRAFT 2014 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 11/30240495 DC : 0 | BS EN 14227-5 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND MIXTURES |
| DIN EN 16025-1:2013-07 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| 12/30256925 DC : 0 | BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| BS EN 16025-1:2013 | Thermal and/or sound insulating products in building construction. Bound EPS ballastings Requirements for factory premixed EPS dry plaster |
| 09/30195711 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 15600-1 : DRAFT 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN ISO 10722:2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
| PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
| 18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| PREN 15330-1 : DRAFT 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| I.S. EN 15600-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 14227-15:2015 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
| I.S. EN 12767:2007 | PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS, CLASSIFICATION AND TEST METHODS |
| DIN EN 933-5:2005-02 | Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles (including amendment A1:2004) |
| DIN EN 13075-2:2015-04 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| DIN EN 14487-1:2006-03 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 13286-2:2010/AC:2012 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| DIN EN 12767:2008-01 | PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS, CLASSIFICATION AND TEST METHODS |
| DIN EN 12697-1 E : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| DIN EN 14227-2:2013-08 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures; German version EN 14227-2:2013 |
| BS EN 13055-2:2004 | Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| BS EN 14317-1:2004 | Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
| BS EN 14316-1:2004 | Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
| BS EN 933-3:2012 | Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index |
| I.S. EN 13075-2:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 2: DETERMINATION OF FINES MIXING TIME OF CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 13075-1:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF BREAKING BEHAVIOUR - PART 1: DETERMINATION OF BREAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS, MINERAL FILLER METHOD |
| I.S. EN 932-5:2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION |
| I.S. EN 14227-2:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND MIXTURES |
| I.S. EN 13450:2013 | AGGREGATES FOR RAILWAY BALLAST |
| DIN EN 13294:2002-09 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF STIFFENING TIME |
| I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 14227-5:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND GRANULAR MIXTURES |
| DIN EN ISO 10722:2007-08 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| I.S. EN 933-3:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
| I.S. EN 13286-2:2010 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| I.S. EN 933-8:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| I.S. EN 933-4:2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
| I.S. EN 1097-9:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| I.S. EN 14227-3:2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND GRANULAR MIXTURES |
| DIN EN 206-1:2001-07 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| I.S. EN 933-5:1998 | TERMS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES |
| I.S. EN 14487-1:2005 | SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
| DIN EN 16630:2015-06 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30282505 DC : 0 | BS EN 16630 - PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 13055:2016 | Lightweight aggregates |
| 07/30155111 DC : 0 | BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES |
| DIN EN 1744-8:2012-11 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| BS EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation |
| 15/30311103 DC : 0 | BS EN 13242 - AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| 13/30262917 DC : 0 | BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| BS EN 16630:2015 | Permanently installed outdoor fitness equipment. Safety requirements and test methods |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 13055-1:2002 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| DIN EN 15599-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| UNI EN 15599-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 15564 : 2009 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| 03/107772 DC : DRAFT MAY 2003 | EN 12697-42 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 42: AMOUNT OF FOREIGN MATTERS IN RECLAIMED ASPHALT |
| DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
| 04/30111539 DC : DRAFT JULY 2004 | EN 14227-10 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL CEMENT AND CEMENT STABILISED SOILS |
| BS EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| DD CEN/TS 14243:2010 | Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| 11/30240501 DC : 0 | BS EN 14227-3 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND MIXTURES |
| S.R. CEN/TS 16637-3:2016 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PART 3: HORIZONTAL UP-FLOW PERCOLATION TEST |
| XP CEN/TS 14243 : 2010 XP | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| I.S. EN 15732:2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| UNE-EN 14227-15:2017 | Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils |
| PREN 15599-1 : DRAFT 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| NF EN 13285 : 2010 | UNBOUND MIXTURES - SPECIFICATION |
| UNI EN ISO 10722 : 2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| UNI EN 16025-1 : 2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| PREN 14227-3 : DRAFT 2011 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND MIXTURES |
| EN 1176-1:2017 | Playground equipment and surfacing - Part 1: General safety requirements and test methods |
| DIN EN 932-5:2012-05 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| DIN EN 933-3:2012-04 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| DIN EN 1097-1:2011-04 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| UNE-EN 13286-2:2011 | Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction |
| DIN EN 12274-7:2005-08 | SLURRY SURFACING - PART 7: SHAKING ABRASION TEST |
| DIN EN 14317-1 E : 2004 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| BS EN 14227-14:2006 | Hydraulically bound mixtures. Specifications Soil treated by fly ash |
| BS EN 13383-2:2013 | Armourstone Test methods |
| BS EN 14227-5:2013 | Hydraulically bound mixtures. Specifications Hydraulic road binder bound granular mixtures |
| BS EN 13286-4:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating hammer |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| UNE-CEN/TS 14243:2012 EX | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| I.S. EN 12697-15:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 15: DETERMINATION OF THE SEGREGATION SENSITIVITY |
| UNI EN 15330-1 : 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| UNI CEN/TS 14243 : 2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 933-3 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
| UNI EN 13139 : 2013 | AGGREGATES FOR MORTAR |
| UNI EN 13242 : 2013 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| UNI EN 12274-7 : 2005 | SLURRY SURFACING - TEST METHODS - PART 7: SHAKING ABRASION TEST |
| UNI EN 933-4 : 2008 | TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
| UNI EN 14227-3 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 3: FLY ASH BOUND GRANULAR MIXTURES |
| I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 1097-1 : 2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| UNI EN 932-5 : 2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| UNI EN 1097-9 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| UNI EN 14227-2 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 2: SLAG BOUND GRANULAR MIXTURES |
| UNI EN 14227-1 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
| UNI EN 13286-2 : 2010 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION |
| UNI EN 13383-2 : 2013 | ARMOURSTONE - PART 2: TEST METHODS |
| UNI EN 14227-5 : 2013 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND GRANULAR MIXTURES |
| UNI EN 12620 : 2013 | AGGREGATES FOR CONCRETE |
| UNI EN 13450 : 2013 | AGGREGATES FOR RAILWAY BALLAST |
| DIN EN 15600-1 E : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DIN EN 14227-15 E : 2016 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
| PD CEN/TS 16637-3:2016 | Construction products. Assessment of release of dangerous substances Horizontal up-flow percolation test |
| UNI EN 1177 : 2008 | IMPACT ATTENUATING PLAYGROUND SURFACING - DETERMINATION OF CRITICAL FALL HEIGHT |
| 14/30294810 DC : 0 | BS EN 14227-15 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
| 14/30299480 DC : 0 | BS EN 1176-1 - PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 14227-14:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 14: SOIL TREATED BY FLY ASH |
| 07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 16630 E : 2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| 11/30240489 DC : 0 | BS EN 14227-1 - HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
| 09/30207815 DC : 0 | BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| 06/30149762 DC : 0 | EN 12273 - SLURRY SURFACING - SPECIFICATIONS |
| DIN EN 14227-15:2016-02 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| DIN EN 12697-2:2015-07 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| PREN 13139 : DRAFT 2015 | AGGREGATES FOR MORTAR |
| 09/30205556 DC : 0 | BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| PREN 1177 : DRAFT 2016 | IMPACT ATTENUATING PLAYGROUND SURFACING - METHODS OF TEST FOR DETERMINATION OF IMPACT ATTENUATION |
| 14/30303776 DC : 0 | BS EN 13285 - UNBOUND MIXTURES - SPECIFICATIONS |
| BS EN 1744-8:2012 | Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| EN 1177:2018 | Impact attenuating playground surfacing - Methods of test for determination of impact attenuation |
| NF EN 15600-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 1176-1:2017 | PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 07/30165774 DC : DRAFT AUG 2007 | BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
| NF EN 15599-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PREN 13043 : DRAFT 2015 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| I.S. EN 12697-2:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| 15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 13/30286641 DC : 0 | BS EN 12767 - PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS AND TEST METHODS |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| PREN 14243-2 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| I.S. EN 15564:2008 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| 17/30365074 DC : 0 | BS EN 14243-2 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| PREN 13242 : DRAFT 2015 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| PREN 14227-1 : DRAFT 2011 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
| I.S. CWA 14243:2002 | POST-CONSUMER TYRE MATERIALS AND APPLICATIONS |
| DIN EN 933-4:2015-01 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| DIN EN 1097-9:2014-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
| BS EN 12274-7:2005 | Slurry surfacing. Test methods Shaking abrasion test |
| BS EN 14487-1:2005 | Sprayed concrete Definitions, specifications and conformity |
| ISO 10722:2007 | Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 13286-2:2010 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Proctor compaction |
| BS EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures. Granulometry analysis Test method for dry components of premixed mortar |
| BS EN 14227-12:2006 | Hydraulically bound mixtures. Specifications. Soil treated by slag |
| BS EN 933-4:2008 | Tests for geometrical properties of aggregates Determination of particle shape. Shape index |
| BS EN 14227-2:2013 | Hydraulically bound mixtures. Specifications Slag bound granular mixtures |
| BS EN 12620:2013 | Aggregates for concrete |
| BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| UNE-EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| BS EN 12697-15:2003 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the segregation sensitivity |
| BS EN 14227-3:2013 | Hydraulically bound mixtures. Specifications Fly ash bound granular mixtures |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN 13139:2013 | Aggregates for mortar |
| UNE-EN 12697-1:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content |
| UNE-EN 932-5:2012 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| UNE-EN 14227-2:2014 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures |
| UNE-EN 14227-1:2014 | Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
| BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
| UNE-EN 14227-3:2014 | Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures |
| BS EN 933-5:1998 | Tests for geometrical properties of aggregates Determination of percentage of crushed and broken surfaces in coarse aggregate particles |
| ISO/TR 10722-1:1998 | Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials |
| BS EN 14227-10:2006 | Hydraulically bound mixtures. Specifications Soil treated by cement |
| UNI EN 12697-1 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| BS EN 12697-1:2012 | Bituminous mixtures. Test methods for hot mix asphalt Soluble binder content |
| UNE-EN 13075-2:2017 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions |
| UNE-EN 12697-2:2015 | Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution |
| BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
| BS EN 15330-1:2013 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| BS EN 13108-8:2016 | Bituminous mixtures. Material specifications Reclaimed asphalt |
| I.S. EN 12697-1:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| UNE-EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| BS EN 933-8 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
| UNE-EN 13075-1:2017 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| BS EN 14227-1:2013 | Hydraulically bound mixtures. Specifications Cement bound granular mixtures |
| UNE-EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
| EN 15330-1:2013 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| EN 14227-10:2006 | Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement |
| EN 14063-1:2004/AC:2006 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| EN 933-5:1998/A1:2004 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES |
| EN 933-7:1998 | Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates |
| EN 14317-1:2004 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 14316-1:2004 | Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 14227-3:2013 | Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures |
| EN 16630 : 2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 14227-14:2006 | Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash |
| EN 14227-12:2006 | Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag |
| EN 14227-15 : 2015 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 15: HYDRAULICALLY STABILIZED SOILS |
| EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
| EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 14227-13:2006 | Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder |
| EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| EN 932-5:2012/AC:2014 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| EN 933-4:2008 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| EN 14227-5:2013 | Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures |
| EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
| EN 1367-3:2001/AC:2004 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT" |
| EN 15564:2008 | Precast concrete products - Resin bound concrete - Requirements and test methods |
| EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
| EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| EN 16025-1:2013 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| EN 14227-1:2013 | Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
| EN 1744-8:2012 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| EN 14227-2:2013 | Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures |
| DIN EN 1744-8 E : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| UNE-EN 15732:2014 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| 06/30158376 DC : 0 | BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| BS EN 15564:2008 | Precast concrete products. Resin bound concrete. Requirements and test methods |
| 13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| DIN EN 1367-6:2008-12 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| DIN EN 15564:2009-05 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| DIN 4226-1:2001-07 | AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES |
| 17/30345777 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| I.S. EN 14227-10:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 10: SOIL TREATED BY CEMENT |
| BS EN ISO 10722:2007 | Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 1744-8:2013 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
| 16/30336446 DC : 0 | BS EN 1177 - IMPACT ATTENUATING PLAYGROUND SURFACING - METHODS OF TEST FOR DETERMINATION OF IMPACT ATTENUATION |
| 06/30158382 DC : 0 | BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULATE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| PREN 14227-5 : DRAFT 2011 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 5: HYDRAULIC ROAD BINDER BOUND MIXTURES |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| UNE-EN 16025-1:2016 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| BS EN 12697-2:2015 | Bituminous mixtures. Test methods Determination of particle size distribution |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| I.S. EN 13285:2010 | UNBOUND MIXTURES - SPECIFICATIONS |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| DIN EN 15732 E : 2013 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| BS EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation |
| UNE-EN 16630:2015 | Permanently installed outdoor fitness equipment - Safety requirements and test methods |
| 02/101686 DC : DRAFT FEB 2002 | PREN 14317-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 1367-6 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
| 15/30311094 DC : 0 | BS EN 13139 - AGGREGATES FOR MORTAR |
| I.S. EN 16630:2015 | PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 1744-8 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
| I.S. EN 15599-1:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| I.S. EN 1177:2018 | IMPACT ATTENUATING PLAYGROUND SURFACING - METHODS OF TEST FOR DETERMINATION OF IMPACT ATTENUATION |
| PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| UNI EN 15600-1 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| DIN EN 13285:2010-12 | UNBOUND MIXTURES - SPECIFICATIONS |
| EN 13285:2010 | Unbound mixtures - Specifications |
| NF EN 12767 : 2011 | PASSIVE SAFETY OF SUPPORT STRUCTURES FOR ROAD EQUIPMENT - REQUIREMENTS, CLASSIFICATION AND TEST METHODS |
| DIN EN 15330-1:2013-12 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN 14227-1:2013-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 1: CEMENT BOUND GRANULAR MIXTURES |
| BS EN 1744-3:2002 | Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| BS EN 12767:2007 | Passive safety of support structures for road equipment. Requirements, classification and test methods |
| BS EN 14063-1:2004 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
| BS EN 933-7:1998 | Tests for geometrical properties of aggregates Determination of shell content. Percentage of shells in coarse aggregates |
| BS EN 13075-2:2016 | Bitumen and bituminous binders. Determination of breaking behaviour Determination of fines mixing time of cationic bituminous emulsions |
| EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
| EN 13055 : 2016 | LIGHTWEIGHT AGGREGATES |
| DIN EN 14227-13:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 13: SOIL TREATED BY HYDRAULIC ROAD BINDER |
| DIN EN 13055-2:2004-09 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| DIN EN 13055-1:2002-08 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| EN 13075-1:2016 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| DIN EN 14063-1:2004-11 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
| DIN EN 14227-12:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 12: SOIL TREATED BY SLAG |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| ISO 3310-2:2013 | Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN 932-5:2012/AC:2014 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.