EN ISO 10140-5:2010/A1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
12-05-2021
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Laboratory test facilities for airborne sound
insulation measurements
4 Laboratory test facilities for impact sound
insulation measurements
5 Equipment
Annex A (normative) - Estimation of the maximum measurable
sound reduction index
Annex B (normative) - Standard basic elements for measuring
the improvement of airborne sound insulation by
linings
Annex C (normative) - Standard floors for measuring the
improvement of impact sound insulation by floor
coverings
Annex D (normative) - Qualification procedure for
loudspeakers and loudspeaker positions
Annex E (normative) - Standard tapping machine
Annex F (normative) - Alternative impact sound sources
Annex G (normative) - Wooden mock-up floor for measuring the
improvement of impact sound insulation by floor
coverings
Annex H (normative) - Specification of heavy and
intense rain with example of a tank
with perforated base
Annex I (informative) - Reference test specimens for
rainfall sound measurements
Bibliography
Describes laboratory test facilities and equipment for sound insulation measurements of building elements, such as: - components and materials; - building elements; - technical elements (small building elements); - sound insulation improvement systems.
Committee |
TC 126
|
DevelopmentNote |
Supersedes EN 20140-10, EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN ISO 140-11 and EN ISO 140-16. (09/2010)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNE-EN ISO 10140-5:2011/A1:2014 | Identical |
UNE-EN ISO 10140-5:2011 | Identical |
ONORM EN ISO 10140-5 : 2014 | Identical |
NS EN ISO 10140-5 : 2010 AMD 1 2014 | Identical |
SN EN ISO 10140-5 : 2010 AMD 1 2014 | Identical |
UNI EN ISO 10140-5 : 2014 | Identical |
DIN EN ISO 10140-5 E : 2014 | Identical |
NF EN ISO 10140-5 : 2013 AMD 1 2014 | Identical |
BS EN ISO 10140-5:2010 | Identical |
I.S. EN ISO 10140-5:2010 | Identical |
NBN EN ISO 10140-5 : 2010 AMD 1 2014 | Identical |
ISO 10140-5:2010 | Identical |
PN EN ISO 10140-5 : 2011 AMD 1 2014 | Identical |
NEN EN ISO 10140-5 : 2010 AMD 1 2014 | Identical |
BS EN ISO 10140-5:2010+A1:2014 | Identical |
DIN EN ISO 10140-5:2014-09 | Identical |
UNE-EN 16286-2:2014 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
BS EN 16205 : 2013 | LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
UNE-EN 16205:2013 | Laboratory measurement of walking noise on floors |
UNI EN 13142 : 2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
CEN/TS 16354:2013 | Laminate floor coverings - Underlays - Specification, requirements and test methods |
EN 13141-8:2014 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
DIN EN 13830:2015-07 | CURTAIN WALLING - PRODUCT STANDARD |
EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
13/30267124 DC : 0 | BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS |
12/30259182 DC : 0 | BS EN 13142 - VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
PREN 13142 : DRAFT 2012 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
UNI EN 15037-3 : 2011 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
16/30333219 DC : 0 | BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
DIN EN 13141-8:2014-09 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
UNE-EN 13830:2016 | Curtain walling - Product standard |
I.S. EN 13830:2015 | CURTAIN WALLING - PRODUCT STANDARD |
I.S. EN 13141-8:2014 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM |
DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
I.S. EN 13142:2013 | VENTILATION FOR BUILDINGS - COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - REQUIRED AND OPTIONAL PERFORMANCE CHARACTERISTICS |
DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
VDI 3755:2015-01 | Sound insulation and sound absorption of suspended ceilings |
BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
UNI CEN/TS 16354 : 2014 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
DIN EN 16286-2:2013-09 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
BS EN 15037-3 : 2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
UNI EN 16286-2 : 2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
PREN 16354 : DRAFT 2016 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
DIN EN 13142:2013-06 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
BS EN 13142:2013 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
EN 13830:2015 | Curtain walling - Product standard |
EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
UNI EN 13141-8 : 2014 | VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM |
EN 13142:2013 | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
PD CEN/TS 16354:2013 | Laminate floor coverings. Underlays. Specification, requirements and test methods |
UNI EN 16205 : 2013 | LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
S.R. CEN/TS 16354:2013 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
I.S. EN 15037-3:2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
BS EN 13830:2015 | Curtain walling. Product standard |
UNE-EN 15037-3:2010 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
BS EN 13141-8:2014 | Ventilation for buildings. Performance testing of components/products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
EN 15037-3:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
BS EN 16286-2:2013 | Railway applications. Gangway systems between vehicles Acoustic measurements |
DIN EN 16205:2013-09 | LABORATORY MEASUREMENT OF WALKING NOISE ON FLOORS |
I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
I.S. EN 16286-2:2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS |
13/30273886 DC : 0 | BS EN 16518 - RESILIENT FLOOR COVERINGS - MEASUREMENT OF IN-ROOM IMPACT NOISE |
I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
UNE-EN 13141-8:2015 | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
ISO 140-5:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faades |
ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
ISO 3382-2:2008 | Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms |
IEC 60942:2003 | Electroacoustics - Sound calibrators |
ISO 140-7:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors |
ISO 10140-1:2016 | Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products |
ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
OIML R 58 : 1998 | SOUND LEVEL METERS |
ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
OIML R 88 : 1998 | INTEGRATING-AVERAGING SOUND LEVEL METERS |
ISO 140-4:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms |
ISO 140-14:2004 | Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field |
ISO 18233:2006 | Acoustics Application of new measurement methods in building and room acoustics |
ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
ISO 140-18:2006 | Acoustics Measurement of sound insulation in buildings and of building elements Part 18: Laboratory measurement of sound generated by rainfall on building elements |
ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
IEC 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
ISO 9052-1:1989 | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings |
ISO 15186-1:2000 | Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements |
IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.