EN ISO 10360-2:2009
Current
The latest, up-to-date edition.
01-12-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Environmental and metrological requirements
6 Acceptance tests and reverification tests
7 Compliance with specifications
8 Applications
9 Indication in product documentation and data sheets
Annex A (informative) - Interim check
Annex B (normative) - Artefacts that represent a calibrated
test length
Annex C (informative) - Alignment of gauges
Annex D (normative) - Mathematical adjustments to low CTE
artefacts
Annex E (informative) - Location of the single stylus probing
test
Annex F (informative) - Relation to the GPS matrix model
Bibliography
ISO 10360-2:2009 specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in ISO 10360-2:2009 are applicable only to Cartesian CMMs using contacting probing systems of any type operating in the discrete-point probing mode. ISO 10360-2:2009 does not explicitly apply to non-Cartesian CMMs or CMMs using optical probing.ISO 10360-2:2009 specifiesperformance requirements that can be assigned by the manufacturer or the user of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for proving conformance, and applications for which the acceptance and reverification tests can be used.
| Committee |
CEN/TC 290
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN ISO 10360-2:2009 | Identical |
| ISO 10360-2:2009 | Identical |
| NF EN ISO 10360-2 : 2010 | Identical |
| UNE-EN ISO 10360-2:2010 | Identical |
| NBN EN ISO 10360-2 : 2010 | Identical |
| UNI EN ISO 10360-2 : 2010 | Identical |
| NS EN ISO 10360-2 : 2009 | Identical |
| NEN EN ISO 10360-2 : 2009 | Identical |
| PN EN ISO 10360-2 : 2010 | Identical |
| DIN EN ISO 10360-2:2010-06 | Identical |
| SN EN ISO 10360-2 : 2010 | Identical |
| I.S. EN ISO 10360-2:2009 | Identical |
| 09/30209365 DC : DRAFT NOV 2009 | BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| CEI EN 62496-2-2 : 2012 | OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS |
| DIN EN 13231-3 E : 2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| EN 62496-2-2:2011 | Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards |
| EN 13231-3:2012 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| I.S. EN 13231-3:2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| VDI/VDE 2617 Blatt 10:2011-01 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
| VDI/VDE 2617 Blatt 5:2010-12 | Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with artefacts |
| VDI/VDE 2617 Blatt 2.1:2014-03 | Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement |
| VDI/VDE 2617 Blatt 9:2009-06 | Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines |
| VDI/VDE 2617 Blatt 13; VDI/VDE 2630 Blatt 1.3:2011-12 | VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors |
| VDI/VDE 2617 Blatt 11:2011-03 | Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets |
| ISO 10360-6:2001 | Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features |
| UNI EN 13231-3 : 2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| UNI EN ISO 10360-6 : 2005 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
| 03/316448 DC : DRAFT SEP 2003 | BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF RAIL GRINDING, MILLING AND PLANNING WORK IN TRACK |
| BS EN 62496-2-2:2011 | Optical circuit boards Measurements. Dimensions of optical circuit boards |
| UNE-EN 13231-3:2013 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| BS EN ISO 10360-6:2001 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features |
| I.S. EN 62496-2-2:2011 | OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS |
| BS EN 13231-3:2012 | Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in track |
| DIN EN 13231-3:2012-04 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| ISO 10360-4:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 4: CMMs used in scanning measuring mode |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 10360-1:2000 | Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 3650:1998 | Geometrical Product Specifications (GPS) Length standards Gauge blocks |
| ISO/PAS 12868:2009 | Geometrical product specification (GPS) Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO/TR 16015:2003 | Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
| ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
| ISO 10360-3:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis |
| ISO 10360-5:2010 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems |
| ISO/TS 23165:2006 | Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.