EN ISO 12696:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Cathodic protection of steel in concrete (ISO 12696:2016)
Superseded date
20-06-2022
Published date
21-12-2016
Publisher
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Structure assessment and repair
6 Cathodic protection system components
7 Installation procedures
8 Commissioning
9 System records and documentation
10 Operation and maintenance
Annex A (informative) - Principles of cathodic
protection and its application to steel
in concrete
Annex B (informative) - Design process
Annex C (informative) - Notes on anode systems
Bibliography
ISO 12696:2016 specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including normal reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement.ISO 12696:2016 applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buildings or structures.NOTE 1 Annex A gives guidance on the principles of cathodic protection and its application to steel in concrete.NOTE 2 ISO 12696:2016, while not specifically intended to address cathodic protection of steel in any electrolyte except concrete, can be applied to cathodic protection of steel in other cementitious materials such as are found, for example, in early 20th century steel-framed masonry, brick and terracotta clad buildings. In such applications, additional considerations specific to these structures are required in respect of design, materials and installation of cathodic protection; however, the requirements of this document can be applied to these systems.
| Committee |
CEN/TC 219
|
| DevelopmentNote |
Supersedes PREN ISO 12696 & EN 12696. (02/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 12696 : 2016 | Identical |
| ISO 12696:2016 | Identical |
| SN EN ISO 12696 : 2017 | Identical |
| SS-EN ISO 12696 : 2017 | Identical |
| BS EN ISO 12696:2016 | Identical |
| PN EN ISO 12696 : 2017 | Identical |
| NF EN ISO 12696 : 2017 | Identical |
| UNE-EN ISO 12696:2017 | Identical |
| UNI EN ISO 12696 : 2012 | Identical |
| I.S. EN ISO 12696:2016 | Identical |
| NEN EN ISO 12696 : 2016 | Identical |
| UNI EN ISO 12696 : 2017 | Identical |
| NBN EN ISO 12696 : 2012 | Identical |
| DIN EN ISO 12696:2017-05 | Identical |
| DIN EN ISO 12696:2016-07 (Draft) | Identical |
| ONORM EN ISO 12696 : 2017 | Identical |
| PREN 12473 : DRAFT 2012 | GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEA WATER |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| BS EN 16299:2013 | Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 12/30256971 DC : 0 | BS EN 12473 - GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEA WATER |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| I.S. EN 14038-1:2016 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION TREATMENTS FOR REINFORCED CONCRETE - PART 1: REALKALIZATION |
| DIN EN 12473:2014-07 | GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEAWATER |
| I.S. EN 12473:2014 | GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEA WATER |
| DIN EN 12473:2000-04 | GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEAWATER |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| PREN 14038-1 : DRAFT 2014 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION TREATMENTS FOR REINFORCED CONCRETE - PART 1: REALKALIZATION |
| PREN 12954 : DRAFT 2017 | GENERAL PRINCIPLES OF CATHODIC PROTECTION OF BURIED OR IMMERSED ONSHORE METALLIC STRUCTURES |
| UNI EN 16299 : 2013 | CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS |
| EN 16299:2013 | Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations |
| UNI EN 12473 : 2014 | GENERAL PRINCIPLES OF CATHODIC PROTECTION IN SEAWATER |
| I.S. EN 16299:2013 | CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS |
| UNE-EN 16299:2013 | Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations |
| 15/30324901 DC : 0 | BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| 17/30346281 DC : 0 | BS EN 12954 - GENERAL PRINCIPLES OF CATHODIC PROTECTION OF BURIED OR IMMERSED ONSHORE METALLIC STRUCTURES |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| UNE-EN 12473:2014 | General principles of cathodic protection in seawater |
| 14/30277789 DC : 0 | BS EN 14038-1 - ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION TREATMENTS FOR REINFORCED CONCRETE - PART 1: RE-ALKALIZATION |
| PREN 1504-3 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| BS EN 12473:2014 | General principles of cathodic protection in seawater |
| DIN EN 16299:2013-06 | CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS |
| EN 14038-1:2016 | Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization |
| IEC 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
| IEC 61558-2-1:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
| IEC 61558-2-2:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers |
| EN 12474 : 2001 | CATHODIC PROTECTION OF SUBMARINE PIPELINES |
| ASTM B 338 : 2017 : REDLINE | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| IEC 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
| IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
| EN 12954 : 2001 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| ISO 13174:2012 | Cathodic protection of harbour installations |
| EN 15257:2006 | Cathodic protection - Competence levels and certification of cathodic protection personnel |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| CEN/TS 14038-2:2011 | Electrochemical re-alkalization and chloride extraction treatments for rein-forced concrete - Part 2: Chloride extraction |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| EN 12495 : 2000 | CATHODIC PROTECTION FOR FIXED STEEL OFFSHORE STRUCTURES |
| IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| ASTM C 876 : 2015 : REDLINE | Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
| EN 13509 : 2003 | CATHODIC PROTECTION MEASUREMENT TECHNIQUES |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN 14630:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
| NACE TM 02 94 : 2016 | TESTING OF EMBEDDABLE IMPRESSED CURRENT ANODES FOR USE IN CATHODIC PROTECTION OF ATMOSPHERICALLY EXPOSED STEEL-REINFORCED CONCRETE |
| CEN/TS 14038-1 : 2004 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION TREATMENTS FOR REINFORCED CONCRETE - PART 1: REALKALIZATION |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 14629:2007 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
| NACE TM 01 05 : 2016 | EVALUATION OF COATINGS CONTAINING CONDUCTIVE CARBON PIGMENTATION FOR USE AS AN ANODE ON ATMOSPHERICALLY EXPOSED REINFORCED CONCRETE |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.