• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 13628-10:2006

Current
Current

The latest, up-to-date edition.

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
Published date

25-10-2006

Foreword
Introduction
1 Scope
   1.1 Purpose
   1.2 Products
   1.3 Applications
2 Normative references
3 Terms, definitions and abbreviations
   3.1 Terms and definitions
   3.2 Symbols and abbreviations
4 Functional requirements
   4.1 General
   4.2 Overall requirements
   4.3 General design parameters
   4.4 Internal fluid parameters
   4.5 External environment
   4.6 System requirements
5 Design requirements
   5.1 Loads and load effects
   5.2 Pipe design methodology
   5.3 Pipe structure design
   5.4 System design requirements
6 Materials
   6.1 Material requirements
   6.2 Qualification requirements
   6.3 Quality assurance requirements
7 Manufacturing requirements
   7.1 Quality assurance requirements
   7.2 Carcass
   7.3 Preparation of compound and calendering
   7.4 Elastomer winding
   7.5 Reinforcement armour layer
   7.6 Insulation layers
   7.7 End fitting
   7.8 Curing process
   7.9 Special processes
   7.10 Manufacturing tolerances
   7.11 Repairs
8 Documentation
   8.1 General
   8.2 Design premise
   8.3 Design load report
   8.4 Design report
   8.5 Manufacturing quality plan
   8.6 Fabrication specification
   8.7 As-built documentation
   8.8 Operation manual
9 Factory acceptance tests
   9.1 General
   9.2 Gauge test
   9.3 Hydrostatic pressure test
   9.4 Electrical continuity and resistance tests
   9.5 Kerosene test
   9.6 Vacuum test
10 Marking and packaging
   10.1 Marking
   10.2 Packaging
Annex A (informative) Purchasing guidelines
Annex B (informative) Bend stiffeners and bend restrictors
Annex C (informative) Use of the API Monogram
Bibliography

ISO 13628-10:2005 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria.

Committee
CEN/TC 12
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
ASTM E 328 : 2013 : REDLINE Standard Test Methods for Stress Relaxation Tests for Materials and Structures
API STD 1104:2013 WELDING OF PIPELINES AND RELATED FACILITIES
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 288-1:1992/A1:1997 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
EN 288-3:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS
ISO 13628-3:2000 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
ISO 4649:2017 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ASTM D 2084 : 2017 : REDLINE TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D 413 : 1998 Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
ASTM E 10 : 2017-05 TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
API 5L : 2012 LINE PIPE
ISO 4647:2010 Rubber, vulcanized Determination of static adhesion to textile cord H-pull test
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
ASTM D 1044 : 2013 : REDLINE Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
ISO 10474:2013 Steel and steel products — Inspection documents
EN 10204:2004 Metallic products - Types of inspection documents
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
DIN 53505:2000-08 TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
ISO 13665:1997 Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
ASTM D 648 : 2016 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ISO 36:2017 Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics
ASTM D 695 : 2015 : REDLINE Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D 5028 : 2017 : REDLINE Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D 570 : 1998 : R2018 Standard Test Method for Water Absorption of Plastics
ISO 34-2:2015 Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces
API 17D : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
ASTM D 746 : 2014 : REDLINE Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire — Part 1: General requirements
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density
ASTM D 1418 : 2017 : REDLINE Standard Practice for Rubber and Rubber Latices—Nomenclature
ASTM E 92 : 2017 : REDLINE Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.