• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 16089:2015

Current
Current

The latest, up-to-date edition.

Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
Published date

16-12-2015

European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or
  protective measures
7 Information for use
Annex A (normative) - Abrasive product guards
        work zone enclosures and their combinations
Annex B (informative) - Impact test for guards - Bursting
        test
Annex C (informative) - Impact test for guards - Projectile
        impact
Annex D (normative) - Clamping methods for abrasive
        products and safety requirements tool holding devices
Annex E (informative) - Noise reduction
Annex F (informative) - Noise emission determination
Annex G (normative) - Requirements for grinding machines
        for the machining of materials generating flammable
        and explosive dusts
Annex H (informative) - Measures for the use of flammable
        metalworking fluids
Annex I (informative) - Examples for the integration of
        extraction and fire extinguishing systems when
        using flammable metalworking fluids
Annex J (informative) - Functional safety - Example
        for rotational speed limit monitoring the
        wheel spindle
Annex K (informative) - MSO 3 (Optional special mode
        for manual intervention under restricted operating
        conditions) - Examples
Bibliography
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2006/42/EC

ISO 16089:2015 specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of stationary grinding machines which are designed primarily to shape metal by grinding:Group 1: Manually controlled grinding machines without power operated axes and without numerical control.Group 2: Manually controlled grinding machines with power operated axes and limited numerically controlled capability, if applicable.Group 3: Numerically controlled grinding machines.NOTE 1 For detailed information on the groups of grinding machines, see the definitions in 3.1 and 3.4.NOTE 2 Requirements in this International Standard are, in general, applicable to all groups of grinding machines. If requirements are applicable to some special group(s) of grinding machines only, then the special group(s) of grinding machine(s) is/are specified.This International Standard covers the significant hazards listed in Clause 4 and applies to ancillary devices (e.g. for workpieces, tools, and workpiece holding devices, handling devices), which are integral to the machine.This International Standard also applies to machines which are integrated into an automatic production line or grinding cell inasmuch as the hazards and risks arising are comparable to those of machines working separately.This International Standard also includes in Clause 7 a minimum list of safety-relevant information which the manufacturer has to provide to the user. See also ISO 12100:2010, Figure 2, which illustrates the interaction of manufacturer's and user's responsibility for the operational safety.The user's responsibility to identify specific hazards (e.g. fire and explosion) and reduce the associated risks can be critical (e.g. whether the central extraction system is working correctly).Where additional metalworking processes (e.g. milling, turning, laser processing) are involved, this International Standard can be taken as a basis for safety requirements. For specific information on hazards arising from other metalworking processes, which are covered by other International Standards, see the Bibliography.This International Standard applies to machines that are manufactured after the date of issue of this International Standard.This International Standard does not apply to stationary honing, polishing, and belt grinding machines and not to transportable motor-operated electric tools in accordance with IEC 61029‑2‑4 and IEC 61029‑2‑10.

Committee
CEN/TC 143
DevelopmentNote
Supersedes EN 13218. (02/2016) Supersedes UNE EN 13218. (03/2016)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 13743:2017 Safety requirements for coated abrasive products
I.S. EN 13743:2017 SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
DIN EN 13743:2016-01 (Draft) SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS
EN 13743:2017 Safety requirements for coated abrasive products
PREN 13236 : DRAFT 2017 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
17/30359229 DC : DRAFT SEP 2017 BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
DIN EN 13743:2017-04 SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS

EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
EN 13236:2010+A1:2015 Safety requirements for superabrasive products
EN 12096:1997 Mechanical vibration - Declaration and verification of vibration emission values
ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
EN 12413:2007+A1:2011 Safety requirements for bonded abrasive products
ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
ISO 20643:2005 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
ISO 10218-1:2011 Robots and robotic devices Safety requirements for industrial robots Part 1: Robots
ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO 1083:2004 Spheroidal graphite cast irons - Classification
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
ISO 525:2013 Bonded abrasive products General requirements
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
ISO 11689:1996 Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
ISO 6104:2005 Superabrasive products Rotating grinding tools with diamond or cubic boron nitride General survey, designation and multilingual nomenclature
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ISO 1052:1982 Steels for general engineering purposes
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
ISO 6103:2014 Bonded abrasive products Permissible unbalances of grinding wheels as delivered Static testing
ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 447:1984 Machine tools Direction of operation of controls
ISO 14159:2002 Safety of machinery — Hygiene requirements for the design of machinery
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 6361-2:2014 Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties
ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges
ISO 16156:2004 Machine-tools safety Safety requirements for the design and construction of work holding chucks
ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
ISO 19719:2010 Machine tools Work holding chucks Vocabulary
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 4997:2015 Cold-reduced carbon steel sheet of structural quality
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
IEC 61029-2-10:1998 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
IEC 61029-2-4:1993 Safety of transportable motor-operated electric tools - Part 2: Particular requirements for bench grinders
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
ISO 6316:2012 Hot-rolled steel strip of structural quality
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 6385:2016 Ergonomics principles in the design of work systems
ISO 3522:2007 Aluminium and aluminium alloys Castings Chemical composition and mechanical properties
ISO 3755:1991 Cast carbon steels for general engineering purposes
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
ISO 230-5:2000 Test code for machine tools Part 5: Determination of the noise emission
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.