• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 16090-1:2018

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
Withdrawn date

30-04-2021

Published date

04-04-2018

European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective/risk reduction
  measures
6 Information for use
Annex A (normative) - Impact test method for guards
        on machines
Annex B (informative) - Equipment for impact test and
        examples of tested materials
Annex C (informative) - Illustrative figures as examples
        of machines
Annex D (informative) - Illustrative figures as examples
        of guards
Annex E (informative) - Examples of the integration of
        exhaust and extinguishing systems when using
        combustible coolants or combustible dust
Annex F (informative) - Provisions when using combustible
        coolants and combustible dust
Annex G (normative) - Gravity-loaded axes
Annex H (informative) - Examples: Concept for leaving/returning
        to a cabin (control station) at Group 3 and Group
        4 machines
Annex I (informative) - Typical demand rates of safety
        functions for calculations according to Table 5
        and Annex J
Annex J (normative) - Safety functions
Annex K (normative) - Noise emission measurement
Bibliography

ISO 16090-1:2017 specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2), machining centres and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1, and for glass, stone and engineered/agglomerated materials as defined in EN 14618.ISO 16090-1:2017 covers the following machines:a) manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);b) manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);c) numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5, C.6 and C.7);d) transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8, C.9, C.10, C.11, C.12 and C.13).ISO 16090-1:2017 also applies to machines fitted with the following devices/facilities:- tool magazine(s);- tool changer(s);- workpiece handling mechanism(s);- powered workpiece clamping mechanism(s);- swarf/chip conveyor(s);- power-operated door(s);- additional equipment for turning;- additional equipment for grinding.When in this document the sole word "machine" or "machines" is being used, it is referred to all above-mentioned groups and types of machines.ISO 16090-1:2017 deals with all significant hazards, hazardous situations and events relevant to this type of machinery which may occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).ISO 16090-1:2017 presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

Committee
CEN/TC 143
DevelopmentNote
Supersedes EN 12417, EN 13128 & EN 14070. (04/2018)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
ISO 13855:2010 Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 9241-400:2007 Ergonomics of humansystem interaction Part 400: Principles and requirements for physical input devices
ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
ISO 16089:2015 Machine tools Safety Stationary grinding machines
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 14738:2002 Safety of machinery — Anthropometric requirements for the design of workstations at machinery
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
ISO 9241-20:2008 Ergonomics of human-system interaction Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN 14618:2009 Agglomerated stone - Terminology and classification
EN 12445:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
ISO 19085-1:2017 Woodworking machines Safety Part 1: Common requirements
ISO 14159:2002 Safety of machinery — Hygiene requirements for the design of machinery
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 15641:2001 Milling cutters for high speed machining — Safety requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 61496-3:2008 Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
ISO 16156:2004 Machine-tools safety Safety requirements for the design and construction of work holding chucks
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
ISO 9355-3:2006 Ergonomic requirements for the design of displays and control actuators — Part 3: Control actuators
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 15534-1:2000 Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
ISO 11228-1:2003 Ergonomics Manual handling Part 1: Lifting and carrying
EN 50370-1 : 2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
IEC TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 15534-2:2000 Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 6385:2016 Ergonomics principles in the design of work systems
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 9241-410:2008 Ergonomics of human-system interaction Part 410: Design criteria for physical input devices
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
ISO 19353:2015 Safety of machinery Fire prevention and fire protection
ISO 230-5:2000 Test code for machine tools Part 5: Determination of the noise emission
ISO 23125:2015 Machine tools Safety Turning machines

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.